Select style & size:Select options
Stop Playing Around.
SRAM's Crank Bearing Preload Adjuster For BB30/PF30 is used to adjust bottom bracket bearing preload on SRAM and Truvativ cranks in BB30 and Press Fit 30 shells. The adjuster threads onto the non-driveside crankarm and as you back it away from the arm, it closes the gap between the arm and bearing, increasing the preload and removing play. The setting is then held in place with a 2mm adjuster bolt. Always keep one on hand in the shop or on the road so you'll never be without your bike.
- Bottom bracket preload adjuster for SRAM/Truvativ cranks
- Threads onto crank arm and backs off to remove play
- For use on BB30/PF30 shells and 30mm spindle cranks
- Item #SRM00DA
- Q & A
Does not fit BB30
I bought this to replace an existing preload adjuster. When attempting to slide this onto my spindle, the inner thread ring was too small. When comparing my old one to this one, there was a visible difference between the space on the outer adjuster ring. Hence, the diameter of the inner thread rings were different. The screw and adjuster ring are ok, it’s just the inner thread ring that didn’t fit. I kept it for spare parts.