Free 2-Day Shipping on Orders Over $50

Detail Images

  • Kuat - Locking Hitch Pin - One Color

Current Color

  • Kuat - Locking Hitch Pin - One Color

Kuat Locking Hitch Pin

$25.00

Free 2-Day shipping on orders over $50. Learn More

Select style & size:

Select options
  • Select options
    • One Color, 3/8in Pin for 1.25in Receiver
      $25.00
    • One Color, 1/2in Pin for 2in Receiver
      $25.00
    4515

    15 Reviews

    Details

    Get hitched and lock 'er down.

    You just dropped some serious coin for your brand new Kuat bike rack—now lock that sucker to the hitch using the Locking Hitch Pin. This pin works with a 1-1/4-inch rack in a 2-inch receiver and is compatible with a range of Kuat racks. The Locking Hitch Pin is available in either a 1-1/4 or 2in version. Two keys are included so you can keep one with your car keys and stash the other at home.

    • Item #KUA0011

    Tech Specs

    Compatibility
    Kuat Alpha, Kuat Beta, Kuat Sherpa
    Recommended Use
    locking bike rack to hitch

    Tech Specs

    • Reviews
    • Q & A

    What do you think about this product?

    Have questions about this product?

    Excellent to lock bike rack

    • Familiarity: I've put it through the wringer

    I have the Kaut Transfer 2, and that rack does not come with any sort of locking pin, just a normal pin. I wanted to ensure that my rack was always secure so I went with this lock. It was exactly what I expected. A good quality pin that would keep my rack safe being parked outside every night.

    Great Add-On for the Transfer 2

    • Familiarity: I've used it several times

    I recently purchased the Transfer 2 rack and wanted to make sure I had a locking hitch pin to keep my bikes and the rack safe. This did the trick! I did end up using the pin that came with the rack and just adding the lock. The bottle opener key chain that was included was a nice addition, as well!

    Keeps your Hitch Safe

    • Familiarity: I've used it several times

    Having this lock on my hitch lets me sleep without fear that someone is going to steal my rafting trailer, with my raft on it, or my bike rack with my bikes on it. Small and simple to use. I always keep the plastic cap over the lock so that it doesn't get jammed up with debris.

    Thought it was bigger...

    • Familiarity: I've used it several times

    Thought this pin was bigger than the one that came with the Sherpa bike rack from Kuat. But it is the same size as the pin that comes with the 2" rack. Love the locking device and setup... just wish it fit a little snugger in the pin hole on my hitch.

    Great accessory for the Transfer 2.

    • Familiarity: I've used it several times

    Just bought a Transfer 2 from Kuat, which has been extraordinarily helpful in taking my Santa Cruz Bronson to the trail head and running to work in its flipped-up, low-profile state. However, the Transfer 2 lacks a locking hitch pin, so you'll have to purchase this as a workaround if you don't want your new investment jacked from your car while parking downtown or leaving your vehicle unattended overnight.

    You'll just need the locking portion if you're using the Transfer 2, as there's no slop removal via hitch tension adjuster like the pricier Sherpa and NV 2.0 models. If you were to use this pin, it would most likely move excessively at highway speeds. Instead, you'll keep your threaded hitch pin that came with the Transfer 2, then slap this locking end on there to get the job done. It comes with a nice dust/water cover, so moisture and nasty debris doesn't work inside. So far, it's been fine and hasn't made any excessive noise.

    locked forever

    • Familiarity: I've put it through the wringer

    It either corroded or got road debris jammed inside, maybe both. Either way, it won't come unlocked. I tried soaking in oil, but I had to have it cut off.

    Works. Needs to be replaced often

    • Familiarity: I've put it through the wringer

    The Kuat Locking Hitch Pin does the trick, but I have had to replace it about every two years from it ceasing up with road debris. Luckily this Spring it ceased while it was off of the truck and not mounted.

    It does its job

    • Familiarity: I've used it several times

    This locking hitch pin does it's job. Keeps my rack from being stolen. I do wish that it came in 5/8 in for a 2 inch receiver since that is the size of the pin that actually came with my Kuat rack, but luckily my rack has the hand tight cam system, so it doesn't rattle around.

    Peace of mind

    • Familiarity: I've used it once or twice and have initial impressions

    Bought this to go with my Transfer 2 rack.
    I'm the type that likes to leave my rack on my car most of the time to it's ready to go, so this little lock helps me feel a little bit better about the rack no disappearing while I'm away from the car.

    Handy Upgrade for Kuat Transfer Users.

    • Familiarity: I've used it several times

    I picked this up for use with my new Kuat Transfer 2 rack. On its own, this pin does not do enough to secure the rack into the hitch receiver--there is a lot of wobble. However, the locking head fits onto the threaded pin that comes with the rack. This combination seems to work well.

    other designs are better

    • Familiarity: I returned this product before using it

    First, the 1/2" Key-Locking Hitch Pin is for 1-1/4" Class I/II Hitch Receivers. Backcountry does not list the 5/8" pin for 2" Class III/IV receivers i.e. the Kuat rack I purchased. Even if they did, this pin has a removable plastic lock cover, which is not attached and can be easily lost.

    I just purchased a Thule Vertex 9031 4-bike...

    I just purchased a Thule Vertex 9031 4-bike hitch rack and don't want to pay the $$ to purchase their proprietary locking hitch pin. One side of the rack (that fits into the 2" receiver) has a 3/8" diameter hole and the other side has a 5/8" diameter hole. Would the 3/8" locking pin work without much slop and pin exposure (so it wouldn't be easily cut)?

    Most 2" receivers (Class III/IV) have a 5/8" locking pin hole. I suggest the solution may be to drill out the 3/8" hole to the same size as the 5/8" hole. Note: the 5/8" hole is oversize to allow a true 5/8" diameter pin to slide through.