What's Summit Club?
Find Your Store
Accessibility Policy
Home Page
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Expert Help

Cart, contains 0 items

Accessibility Policy
Home Page

Cart, contains 0 items

When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.

New Arrival

New Arrival

Nivia
Be the first to review

3D Finder Avalanche Beacon

$649.00
Color:Indigo Blue

Quantity



Join Summit Club+ and


Nivia 3D Finder Avalanche Beacon routes straight to a signal

The Nivia 3D Finder Avalanche Beacon reads standard 457 kHz signals like any transceiver on the market, then layers its own GPS-based coordinate system on top to route straight toward a buried signal instead of tracing the curved magnetic field lines other beacons rely on. That GPS layer removes the zigzagging and cross-search pattern a flux-line search normally demands, guiding a rescuer directly toward the probing point once within range. Every second matters in a live search, and this beacon's third-party compatibility means it works alongside any other transceiver already in a group's kit.


What Our Gearhead® Experts Are Saying:

"I've run companion searches on flux-line beacons where I lost seconds circling back after an arrow jump, and the Nivia 3D Finder Avalanche Beacon just points and goes. The straight-line route to the probing point cuts out the guesswork I used to build into every drill."


Details

  • Avalanche beacon with GPS-guided direct-route search
  • USB-C port doubles as emergency phone charger
  • Lithium-ion battery delivers up to 300 hours of use
  • Rated from -20°F to 113°F for cold-weather reliability
  • One-button control marks multiple burials and group checks
  • 2K technopolymer housing built for durability
  • Nivia app adds weather, avalanche reports, and emergency calls
  • Item #NIV0002
Antennas
3
Digital Range
50m
Battery
Lithium-ion, 3.7V, 1100mAh, 6.66Wh
Batteries Included
USB-C rechargeable
Battery Life
Up to 300 hours
Dimensions
2.64 x 5.12 x 0.94in (67 x 130 x 24mm)
Claimed Weight
7.93oz (225g)
Activity
2.64 x 5.12 x 0.94in (67 x 130 x 24mm)
Woman kneeling in avalanche debris holding a Nivia 3D Finder, with a second skier probing behind her.

Nivia

3D Finder

Straight-Line Rescue Routing

Inside The 3D Finder

Gloved hand holding a Nivia 3D Finder during a fine search.

3D Coordinate System

The 3D finder generates its own localized coordinate system and calculates the buried victim's exact position inside it. A point rather than a bearing means no cross-searching and no bracketing, and lab data puts the search at up to 30% faster.

Skier in red checking the battery level on a Nivia 3D Finder.

Rechargeable Cells

A lithium-ion cell runs up to 300 hours on one charge and refills over the same USB-C cable as a phone. Topping up before a tour is the same habit as charging any other piece of kit you carry.

Hands holding a Nivia 3D Finder with the USB-C port visible.

Emergency Phone Power

A dead phone can draw charge straight from the beacon, enough to place a call for help. Phone charging stops once the beacon drops to 60% and will not start below it, so there is always enough to search.

Skier in red holding a Nivia 3D Finder while a partner preps skis.

Universal Beacon Compatibility

The 3D finder transmits on 457 kHz, the international standard, so any beacon on the mountain can find it. A 70-meter search strip width, measured to ICAR AVA REC 0007, covers a debris field in fewer passes.

Gloved hand holding a Nivia 3D Finder, red control button visible below the screen.

One-Button Control

One red button handles marking in a multiple burial, group checks at the trailhead, and initial setup. Marking a second burial takes the same press as the first, so the sequence holds as the search gets harder.

Nivia 3D Finder with the included shovel and probe.

Add A Shovel And Probe

Avalanche rescue takes all three tools, and a beacon on its own only finds the burial. The package pairs the 3D finder with a 280 cm seven-part probe and an anodized aluminum shovel on an extendable shaft.

Shop The Package
Two ski tourers walking through trees in low winter sun.

Three skiers touring across an open snow slope.

Two skiers skinning uphill with mountains behind them.

Three ski tourers looking across an avalanche debris field.

Skier sliding a Nivia 3D Finder into its chest harness.

Nivia 3D Finder lying on snow showing a burial depth reading.

Red Nivia logo overlayed on steep mountain slope with s lines carved into the snow and a skier descending.

Engineered To Find Faster

Nivia is a brand of Rosenberger Hochfrequenztechnik, a German radio-frequency engineering firm, created to bring that signal expertise to avalanche rescue. Instead of refining the classic beacon search, the brand rethinks it entirely, so the gear stays intuitive when the pressure is highest.

Shop All Nivia