Edelrid Kids

Frequently Asked Questions

• What should I check to ensure a proper fit when trying an Edelrid kids' harness?

  Check that the child's weight is within the harness limit (up to about 40 kg) and that the tie‑in point sits at the child’s torso center—Fraggle’s tie‑in point is higher for small bodies while Finn’s center‑fit positions the tie‑in centrally. Verify buckle security (Slide Block buckles), that leg loops and waist adjust smoothly without pressure points, and that 3D mesh padding and soft edges sit comfortably so the child can don/doff with minimal help. Always finish with an adult final‑check of buckles, webbing, and tie‑in before climbing.
• How do the Fraggle and Finn accommodate a growing child over time?

  Fraggle’s "growing" construction allows the tie‑in point to move with the child and uses fixed/stiff leg loops and two Slide Block buckles to make repeated donning easy as the child grows. The Finn uses an adjustable waist and leg loop system (three Slide Block buckles) with sliding waist padding and a sandwich leg‑loop construction to expand fit while maintaining comfort. Both designs aim to extend usable life up to the harness’s ~40 kg limit, but fit should be rechecked regularly as kids develop.
• What are the recommended inspection and care steps for Edelrid kids' harnesses?

  Inspect webbing, stitching, buckles and hardware before each use—look for fraying, discoloration, damaged stitching, or triggered wear indicators (the Finn shows red when worn). Clean with mild soap and water, rinse thoroughly, air‑dry away from direct heat or sunlight, and avoid chemical treatments that degrade polyamide; retire or send for professional inspection if you observe any structural damage or after a significant fall. Follow Edelrid’s specific care and retirement guidance from the product manual for final decisions on service life.