Select style & size:Select options
Some things in life never get old. Every time we drive across Kansas and get to the front range, the striking views of the Rocky Mountains make us giddy and ready for adventure. Every time we lace up a new Chris King hub, we marvel at the jewel-like perfection of the anodized finish. If we had blue hubs on our bikes, we might feel the need to have some red or green or whatever we had in our hands at the moment.
The Chris King 10x135mm Rear Thru-Axle Hub will fit any bike with standard 135mm dropout spacing -- cross-country bikes, trail bikes, all-mountain bikes, etc. The difference between this hub and their standard 135mm ISO Disc hub is the absence the use of a quick release skewer. The 10x135mm Thru-Axle hub uses just that -- a 10mm thru-axle to clamp the rear hub into the frame. It is a great choice for full suspension frames because it will add stiffness and rigidity to a rear triangle full of articulating pivot points. What you will get from this is more precise rear wheel tracking over nasty terrain and a side benefit of less flex is longer pivot life.
Of course, the 10x135mm Thru-Axle hub features Chris King's signature RingDrive freehub system to ensure inexhaustible high-performance. Available in Black and Red.
- Item #CKG0053
- Q & A
I have a 2014 Niner jet 9 with 135x10 qr and a 1x11 drivetrain. I am wanting to lace this hub to my 32h stans wheels. will this 135x10 work with my 11spd qr?
Is this hub compatible to swap out an XD...
Is this hub compatible to swap out an XD Driveshell if one wanted to run 1X11 speed rear hub? I'm assuming this hub is 9/10 speed. let me know. thanks.
This hub can be changed over to an XX1 compatible hub. You'll just need to use this part, CKG000D, and a link to it: http://www.competitivecyclist.com/chris-king-iso-xd-driveshell.
If there is anything else you need please let us know.