Select Style & Size
Remove the guesswork from mid-ride flats.
The Lezyne Gauge Drive HP Pump is for anyone who’s ever been stranded because of an empty CO2 cylinder. This high-PSI hand pump makes it easy to fix a mid-ride flat and measure up to 120PSI to remove the guesswork from a repair. The overlapping pump handle adds distance to pump stroke so that you actually feel like you’re getting somewhere as you work to get on with your ride.
- CNC-machined aluminum body
- ABS flex hose includes a pen gauge that measures up to 120PSI
- Compatible with Schrader and Presta valves
- Item #LED002K
- aluminum, composite
- 9.1 in
- Valve Type
- Presta, Schrader
- Max Pressure
- 120 PSI, 8.3 bar
- Claimed Weight
- 119 g
- Recommended Use
- inflating tires
- Manufacturer Warranty
- 2 years
What do you think about this product?
December 10, 2017
Avoid at ALL COSTS, complete ** POS !!!
- I've used it once or twice and have initial impressions
Cheap plastic end cap filled one tube then failed, the threads pulled out where the gauge hose (the reason I bought this) threads into pump body. Called Lezyne customer service, they sent me a METAL replacement, and instructions to replace. OK. Plastic end glued in with some super glue of some kind, heated with butane heat torch to loosen, cut a slot in the plastic cap like they said and tried to remove. It was going to break the hack saw blade, switch to a stiff scraper. Re-heated several times, finally grabbed pump body with pipe wrench in desperation, still, plastic cap would not budge. Seriously risking physical injury at this point. So, may work with metal cap, but don't risk it!! Nothing worse than a flat, oh, except when you spend fifty bucks on a POS pump and end up walking in your cleats anyway.
July 5, 2017
Do not buy...plastic threads that fail
- I've put it through the wringer
- True to size
Looks like a great pump but after 3 uses I am seeing the marking on the gauge starting to wear off. The black numbers showing the PSI come off very easily so be careful Also.....the plastic threads on the end of the pump are terrible and cross thread. Also removing the pump from the valve can sometimes result in the valve core coming out. I would not recommend this pump.
October 11, 2016
Does its job
- I've used it several times
This is a great little pump. It's doesn't seem to be super duper accurate, but it's good enough that it will save you if you have to repair and/or pump on the go.