Free 2-Day Shipping on Orders Over $50

Detail Images

  • Cane Creek - Top
  • Cane Creek - Helm Coil 160 Boost Fork - 29in - Gun Metal Grey
  • Cane Creek - Top -

Current Color

  • Cane Creek - Helm Coil 160 Boost Fork - 29in - Gun Metal Grey

Cane Creek Helm Coil 160 Boost Fork - 29in


Free 2-Day shipping on orders over $50. Learn More

Select style & size:

Select options
  • Select options
    • Gun Metal Grey, 51mm Offset, 15x110

    Be the first to review


    Next level plushness.

    There's no getting around the fact that a coil sprung fork is always going to be plusher than an air sprung fork. Given the linear nature of a coil spring and the reduction in the number of friction inducing seals, you wind up with a fork that’s way more sensitive to trail chatter thus offering up a smoother ride. Why don't you see more coil forks spec'd on bikes you might be asking yourself? Good question and the simple answer is there is a weight penalty in the neighborhood of 265 grams (that's about 9.3 ounces) over its air sprung version, also it would be difficult to spec the correct spring rate for each rider since it's not a simple as installing a pump and adding or removing air to achieve the correct sag. However, if you're a discerning rider and could care less about weight and instead prize a superior ride, have a look at the Helm Coil 160 Boost Fork for 29in wheels from Cane Creek and revel in its linear spring curve, 35-millimeter stanchions, and refined damper that'll have you mobbing through rough sections of trail in complete comfort while offering a bottomless feel on the biggest drops, berms, and lips in the park.

    There's a reason why you see coils almost exclusively on DH bikes and a huge resurgence in enduro. Coils simply keep your tires glued to the trail and does a wonderful job of soaking up rugged trail obstacles. It'll provide more confidence in the rough stuff and offers a wider range of adjustability to tune it to your riding style and terrain. The chassis is the same as the air version giving you the same sure tracking and resistance to torsional twisting, as well as the same closed cartridge mono-tube damper as used on the air-sprung version damper, albeit tuned for a coil spring, with 10 and 17-clicks of high speed and low speed compression and 10-clicks of slow speed rebound.

    The Helm Coil 160 Boost Fork is travel adjustable, allowing you to switch between 130 and 160 millimeters of travel, for dialing it in for a particular build or experiment with different ride heights. It's adjustable in 10-millimeter increments by moving the location of the spring perch, otherwise known as the coil piston, on its travel-indexed compression rod. Forks come stock with a 55-pound coil spring that's intended for riders weighing anywhere from 160 to 200 pounds, with 35, 45, and 65-pound alternatives sold separately for lighter and heavier riders alike.

    Once you've situated the correct coil spring for your body weight it's time to dial in the sag and Cane Creek makes setup easy with a spring pre-load adjustment on the top left fork leg providing 16 clicks of adjustment. Finally, the Helm Coil 160 Boost Fork comes with a 15 x 110-millimeter D-Loc thru-axle, which slips into a set place with a locking latch on the other side preventing it from going anywhere, as well as an adjustment ring for setting the lever's tension.

    • Coil-sprung sensitivity and support for aggressive riders
    • Lightweight coil spring provides a more linear spring curve
    • Damper offers low/high-speed compression and rebound tuning
    • Stock forks come with 55lb spring for 160 to 180lb riders
    • 160mm of travel in stock form, adjustable from 130 to 160mm
    • 35mm stanchions provide stiff tracking over rugged terrain
    • Boost 15 x 110mm D-Loc thru-axle with quick-release lever
    • 35, 45, and 65lb springs available for lighter and heavier riders
    • Item #CNE001V

    Tech Specs

    [stock] 160mm, [internally adjustable] 130 - 160 mm
    Stanchion Material
    Lower Material
    Crown Material
    Wheel Size
    29in, 27.5+
    Steer Tube Diameter
    1 - 1/8 - 1.5in tapered
    Stanchion Diameter
    Axle To Crown
    568mm at 160mm
    Spring Type
    spring (55lb included)
    closed cartridge mono-tube design
    high-speed compression (10 clicks), low-speed compression (17 clicks), low speed rebound (10 clicks), indexed travel adjust, spring pre-load adjust
    D-Loc 15 x 110mm Boost thru-axle w/quick-release
    Max Rotor Size
    Brake Compatibility
    post mount disc
    Claimed Weight
    Recommended Use
    enduro, trail
    Manufacturer Warranty
    1 year

    Tech Specs

    • Reviews
    • Q & A

    What do you think about this product?

    Have questions about this product?