SIR 9 Mountain Bike Frame - 2016
Out of Stock
Don't worry though, we have a lot more Hardtail Bike Frames in stock than that.
Shop Similar ProductsYes, S.I.R.
The award for best ride quality has always gone to steel. That’s where the Niner S.I.R. 9 frame shines. The S.I.R. 9 isn’t just steel, it’s Reynolds 853—one of the best, most respected steel alloys for bicycle frame-building. Because of this, the S.I.R. 9 has that legendary ride quality that everyone else is chasing. Sure, it may be a little heavier than your dentist’s carbon fiber frame, which costs more than your car, but it rides better. And, while we agree that the S.I.R. 9 is a little bit old-school, it isn’t behind the times. You get 142mm rear spacing, a post-mount rear caliper, and the option to run just about any drivetrain configuration out there, from singlespeed to 33-speed.
The secret behind all this drivetrain diversity is the eccentric bottom bracket. The EBB makes setup simple, unlike individual adjustable dropouts.
If you plan on going the geared route, Niner recommends doubles not exceeding 26/39 chainrings for SRAM, and 28/40 for Shimano. However, a standard triple will pose no problems. The rear triangle will accommodate a 2.4in tire, and you can run a 160mm rear rotor. You’ll need a bottom pull, high mount front derailleur with a 28.6mm clamp. The S.I.R. 9 uses a 27.2mm seatpost, a 73mm BB (only external style bottom brackets work with the EBB), and a 44mm tapered headset. The maximum chainring size varies depending on the position of the BioCentric EBB insert. At the most rearward position, the Niner recommends running no larger than a 30t chainring, and when in the forward position, it will accept a 36t ring. It comes with a Maxle rear axle.
Details
- Reynolds 853 steel frameset
- 142mm rear spacing
- Eccentric bottom bracket
- Item #NNR0030
- Frame Material
- steel
- Suspension
- hardtail
- Head Tube Diameter
- [upper cup] ZS44/28.6, [lower cup] EC44/40
- Headset Included
- yes
- Bottom Bracket Type
- Niner Bio-Centric EBB
- Cable Routing
- external
- Front Derailleur Mount
- 28.6mm clamp-on, high-clamp
- Derailleur Pull
- bottom
- Compatible Components
- Shimano, SRAM
- Seatpost Diameter
- 27.2 mm
- Recommended Use
- cross country
- Manufacturer Warranty
- 2 years on frame
Reviews
Q&A
What do you think about this product?
View
Selecting an option will reload the available reviews on the pageSorry, we don’t currently have any of those types of reviews for this product.
Need Expert Advice?
Our Gearheads Can Help