Free Standard Shipping for Orders Over $50
Home Page

Detail Images

Current Color

Voile Splitboard Hardware Puck Set

Temporarily Out Of Stock

Don't get too bummed. This item is on the way and will be available for purchase as soon as it rolls into the warehouse.

Can't wait? Consider one of the other Splitboard Bindings we have in stock.

View Similar Products

Splitboard Hardware Puck Set

Get on your way to exploring what lies beyond the resort by outfitting your splitboard with the Voile Splitboard Hardware Puck Set. It includes everything you need to mount traditional bindings on a splitboard in riding mode.
  • Four pucks
  • 2.5-degree cant
  • Four puck gaskets
  • Two in-line slot discs
  • Two parallel slot discs
  • Eight M6 x 10.7mm truss-head screws
  • Alignment guide
  • Item #VOL001E

Compatibility
4-hole
Manufacturer Warranty
1 year

Tech Specs

What do you think about this product?

View

>Rating: 5

Puck Yeah

Familiarity:
I've put it through the wringer

I've been using Voile pucks for over 5 years now and I've never had any issues. They work great with Spark R&D bindings in my experience. Pretty easy to set up as well with the included alignment guide.

>Rating: 5

Great price option for Spark R&D

Familiarity:
I gave it as a gift but have feedback to share

Bought these for my girlfriends SparkR&D bindings! She loves them, super easy to use and even though they are cheaper than other options still feel and function really well!

>Rating: 5

Canted for the win!

Familiarity:
I've put it through the wringer

Great pucks that are easy to Install with the alignment guide it comes with. I went with the canted as they feel more natural on the knees. Bought these for my Burton Hitch hikers and they work great!

>Rating: 5

Good Stuff

Familiarity:
I've used it several times

Really easy to mount and readjust. The cant is nice.

>Rating: 5

Nice Pucks

Familiarity:
I've used it several times

These were easy to install, looks clean on my setup, and didn't even know they were canted. Feels good to ride on and couldn't be happier. Thanks Backcountry for great backcountry products!

>Rating: 5

great product

great product, very happy with these

>Rating: 5

The Best

Always support Voile. Great quality, great service, great products.

>Rating: 5

I canted get enough

Familiarity:
I gave it as a gift but have feedback to share

I bought these for a friend as a Christmas present, he loves them. They make your splity feel a little more like a resort board. Add that canting, save those knees.

>Rating: 5

Works great.

Familiarity:
I've used it several times

Compatible with the Burton Hitchhiker bindings. (https://www.backcountry.com/burton-hitchhiker-snowboard-binding) Easy to use, easy to set up, easy to adjust, and very durable.

>Rating: 5

Perfect.

Easy to mount. Easy to adjust. Easy to transition. Canted pucks makes for comfy riding. Save your money and get the voile pucks over the sparks.

>Rating: 4

Love Canted Option

Familiarity:
I've put it through the wringer

I've used canted bindings on my resort board for while now and am happy to see a similar option for backcountry setups. I'm using these pucks with Burton Hitchhiker bindings and they have been great. Zero compatibility issues, the bindings fit great without any sanding required. I will say that installing these was a major pain. The rubber gaskets are hilariously small, which makes fitting them to the pucks not easy.

>Rating: 5

simple

Familiarity:
I've put it through the wringer

bindings and these pucks work great

>Rating: 5

Cant or Flat? Cant away!

Familiarity:
I've put it through the wringer

You’ll notice that these pucks come in two different styles 1. Regular and 2. Canted. I’ve had the regular in the past and it’s great. Super easy and straight forward. I made the switch to Canted (2 degree slant) which simply helps with the early rise, easier on the ankles and matches well with the camber of the board under your foot. Can’t go wrong with either option! If you go to the Canted style, you cannot go back to the flat. You’ll be committed to the 2 degrees, so keep that in mind while purchasing.

>Rating: 4

Bought these for my Spark R&D's

Familiarity:
I've used it several times

I bought these pucks as a cheaper alternative for your my new Spark R&Ds. These are great quality, however the rubber piece is really tricky to place into the pucks. Haven't had the chance to use these yet since there hasn't been much snow to tour.

>Rating: 5

They work great

Familiarity:
I've put it through the wringer

Simple functional voile pucks

>Rating: 5

Straight-forward

Familiarity:
I've used it once or twice and have initial impressions

Simple and a good price. What more can a girl ask for?

>Rating: 5

Save some $$$

Familiarity:
I've used it several times

Stoked to find out these work with Spark r&d bindings. Save some money and get these vs the $75 Spark pucks.

>Rating: 4

What you need with a factory split

Familiarity:
I've put it through the wringer

This is what you need if you have split specific bindings and a factory splitboard (Karakoram clips or Voile hooks). They work fairly well and the price is right. Like other reviewers said, it is a tight fit and you really have to dial it in before getting out. They are almost half the price of the Spark pucks. If you can afford it, the Spark pucks are a bit easier to get dialed in but these do the same job for $30 less and a bit more elbow grease.

>Rating: 5

Essential Gear

Familiarity:
I've put it through the wringer

Do you have Karakoram bindings? Nah, you're too cool for all that mechanical engineering. You've chosen to stick with the OG puck sliding system. These pucks are essential to any Voile binding or Spark R&D binding system. Set up is straight forward. I would recommend getting some locktite glue so they stay secure all season long. If you're having a hard time sliding your bindings on and off I'd recommend getting some sandpaper and sanding the edges down a bit. When Voile manufactures a big set of these puppies, you can get a bit of extra plastic on some. If you have any questions on your new splitboard set up, please reach out to me with questions. As a gearhead I'm here to be your personal expert to get you ready for an awesome season in the backcountry.

Do

! ! ! WARNING - BEWARE OF USING LOCTITE ! ! ! Loctite chemically attacks the glass-filled nylon which is used to make many commonly found snowboard and splitboard binding hardware. DO NOT get liquid Loctite on ANY plastic components. If you're going to use it, give yourself a couple of days, apply the Loctite ONLY to the TIPS of the screws, and LET DRY. Wipe any excess Loctite off gently with a rag, and when assembling, take care not to let the Loctite touch any plastic/nylon hardware. My experience is that fresh loctite and 1 (ONE!) day of riding will destroy pucks/mounting discs. This is not something that you want to be worrying about as you drop in somewhere in avalanche country....

>Rating: 5

These were exactly what I needed!

Familiarity:
I've used it once or twice and have initial impressions

I was trying to finish my split set up and needed pucks. I have a Jones Solution with Vole Light Rail bindings and these pucks work perfectly! Shout out to my gear head, Zach, for helping me out and answering all my silly questions!!!!

>Rating:

Are these DIY compatible and will they work with spark arc bindings?

Nathan, These will work with Spark bindings. As for DIY compatible, are you looking for compatibility with plates or mounting these to the board with t-nuts and not in a set of inserts? If so, you'd want the pucks that come with the DIY kit for that. Feel free to hit me up with any snowboard or splitboard questions!

>Rating:

Are these for traditional split board inserts or the voile channel?

Ginger, These are compatible with 4-hole patterns. There is a different puck version for channel boards. Feel free to hit me up with any snowboard or splitboard questions!