Select Style & Size
Hardwire 3-Pin Telemark Ski binding
- Tempered-stainless-steel connecting rods deliver excellent edge-to-edge performance in crud and variable snow
- Durable nylon V-120 riser features a sloping design to accommodate your telemark boots’ shape
- Climbing wire (sold separately) fits into heel platform to provide easy uphill strides
- Item #VOL0098
- 6061-T6 aluminum
- Boot Compatibility
- 75mm telemark
- Touring Mode
- Stand Height
- 20 mm
- Claimed Weight
- [pair] 2 lb 13 oz
- Recommended Use
- telemark touring
- Manufacturer Warranty
- 1 year
What do you think about this product?
January 31, 2019
The climbing wires are included!
- I've used it once or twice and have initial impressions
I just received my order, the climbing wires are included as shown in the product photo. There are two pair, a short pair and a long pair. I've attached a photo: I'll update my review after I get to ski with these new bindings, haven't mounted them yet.
December 1, 2015
Beware, product may not be as shown
The heal piece is shown as accommodating two different heights of climbing bars (consistent with what is posted for sale on the Voile website) but what I received included heal pieces that accommodate only one climbing bar each, consistent with what you get with the Voile V Series Binding Risers. In the process of trying to resolve with BackCountry
November 6, 2015
Voilé Hardwire 3 Pin Telemark Binding
November 10, 2015
Hey Jonah, why do you you guys make people buy the climbing wires separately instead of including them like every other manufacturer? The price is already exorbitant for 1990s technology, then the user has to pay $20 more to actually tour with them.
April 19, 2013
We use the releasable version of this binding. We are posting this comment here because BC must be out of them for the year. I (Brad) took a mountaineering class taught by Central Washington Mountain Rescue and the main teacher, a gnarly alpinist told the group he teles with a releasable binding now after breaking his leg on a moderate inbound and groomed run. We wondered if the release would cause the binding to lose is rigidity, but don't believe it does. We are sure the release has saved Brad from another ACL surgery. When it is adjusted correctly, it has never released when we did not want it to. So, if the releasable version of this binding is solid, this binding has to be. Brad never thought much of the three pin addition until it ripped out and bent a hardwire useless on a bomber snag. The three pins got him back down the hill, and it was actually kind of fun. Thee three pins also allow more of a pivot function allowing your tips to ride a little higher over drifts than when the binding is locked down with the hardwire bail when going up hill. Video of an exhausted Andy M. cutting a line after hours on Mach V, a black diamond at White Pass, WA in semi heavy Cascade powder covering the usual icy, rutted moguls.
Andy and Brad Mellotte
April 10, 2013
Great for the up and the down
Had these set up with Madshus Epochs and the Fischer BCX 875 boot, recently transferred them to Voile Vectors and am using the Garmont Excursions. Use them mostly for cruising around looking for mellow downhills and running laps on east coast tree stashes. Have also had them out at the local resort a time or two and they worked fine. Really solid binding, easy to align the pins, great to have the free heel option while touring and the heel lock provides a nice amount of stability for the down. Would recommend picking up a pair of heel lifts right off the bat to avoid having to either remove the heel plate or mangle yourself with a flat head screwdriver trying to slip them on a heel plate that is already installed (http://www.backcountry.com/voile-climbing-bars-wire-only). Go with the "Tall"/75mm height due to the already high pad.
February 2, 2013
Asnes Ingstad & Voile Hardware 3-pin
- I've used it several times
I have mounted Voile Hardware 3-pin to my Asnes Ingstad skies. I love it and it is great together i mountain in Greenland. Greenland is very extreme, therefore are these product is great to use in backcountry and Telemarking Ski: Asnes Ingstad is a very lightweight and rugged mountain skis with steel edges and the whole entire 22 mm sidecut. It is equipped with tension and lubricant pocket. The ski is the same as Combat Nato, developed for special departments of defense, with both walking and driving characteristics. The ultimate mountain ski that are suitable for the challenges the mountain has to offer. http://www.asnes.com/index.php?mapping=55&&maingroup=SKI&brand=ASNES&itemno=540189&subgroup=MNT http://www.asnes.com/index.php?mapping=45&nyhet=34 Greenland: http://www.greenland.com/en/things-to-do/outdoor-aktiviteter/ski-i-groenland.aspx
Ole Peter K.
November 2, 2010
This binding rocks. I like the solid feel of the hardwire, while the spring cartridges contribute a nice giving feel when you jump from crud to powder. These bindings are so simple, I have never had a problem with breaking parts or missing pieces. Overall, these bindings are great. The only part i don't care for, though, is the problem with trying to match your boot holes with the 3 pins.
December 23, 2010
try closing the heel latch before you close the toe box bale. It will push the front of you boot up against the front of the binding and make closing it a snap.
January 20, 2011
To assist lining up: Use a sharpie (or something) to make visual reference marks. I clipped my boot into the binding and used a sharpie to one mark on the boot right next to another mark on the binding. This gave me a visual indicator so if I line up the marks on the boot and binding, the bail will close.
March 19, 2013
Practice at home on your rug. Not so slippery, ski stays put. Markers or other aids are close to hand to mark your boots or bindings. Then go to a slippery slope.
December 3, 2015
I am currently using the Voile 3 pin cable telemark binding with a 58 mm climbing bar on the heel piece (no riser). I just purchased the Voile Hardwire 3 Pin Telemark binding and 58 mm climbing bars. Because the hardwire binding has a riser and the climbing bar attaches at the base of the heel piece the effective heel lift will probably be close to half an inch less. Is the 58 mm climbing bar adequate for this binding?
November 23, 2015
I am new to telemark, would these be good bindings for a beginner? Also, I have a pair of Garmond Gara Firepower boots. Are these compatible? Cheers!
November 24, 2015
Hey Troy, These Voile Hardwires are compatible with your Garmont Gara Firepower boots but depending on what ski you are using them on and what type of skiing you will be doing there might be better choices. Check out the 22 Designs Vice (Item # TTD0025) and BD 02 Bindings (Item # BLD0971) as other options. I am an avid telemark skier so feel free to contact me directly with any more questions. Kyle Expert Gearhead email@example.com 801-736-4337
November 7, 2015
I would like to use this binding with the Madshus Annum and Scarpa T4s. Based on the reviews and Q&As below this would be a good setup, correct? Also under the comments associated with Andy and Brad Mellotte's video there is mention of making this binding releasable. Do you carry the releasable binding plates?
November 8, 2015
Hey Jonathan, I agree that the Voile Hardwire 3-Pin bindings, Madshus Annum and Scarpa T4 boots would be a good touring set-up. Where will you be skiing primarily? Unfortunately we do not sell the releasable binding plates. Feel free to contact me directly with any more questions about telemark bindings or if you are interested in setting up an order. Kyle Expert Gearhead firstname.lastname@example.org 801-736-4337
November 26, 2015
Telebry sells a releasable binding compatible with Voile three pin hardwire. http://www.telebry.com He reports that it is the only telemark releasable binding that releases in all directions including upwards and twisting moves. It also has double action brakes so that you don't need a leash in case you get disconnected from your the ski -- it will stop in the snow. It is also reportedly safer in an avalanche because you won't be connected to your skis in anyway. Finally, the double action brake makes it easier to step into it so it doesn't slide around on the ice or snow while you are trying to step into it or in case you drop it while transporting it. I am new to this as well. But from the research that I have done this seems to be the safest releasable binding for telemark skis.
January 26, 2015
How would these pair up with Alpina Explorer 75 boots and Madshus Annum Skis? Would they be overkill or good to go? Debating between these or the Voile 3-pin Cable
February 26, 2015
probably a good match. I just switched to these from the 3pin cable on my similar skis (fischer S98), though personally, I would use a stouter boot. I use Scarpa T-4's or T-2's unless it's super flat and the snow's soft.
February 4, 2014
What binding should I get? I'm mainly...
What binding should I get? I'm mainly skiing lifts and groomers, but I like to ski glades whenever I can. Should I get this binding? or maybe HD mountaineer or normal 3-pin. I have the Garmont syner-g
May 3, 2015
If your area skiing you may want to beef up a bit. G3 Targa ascent would be my recommendation with those boots.
March 8, 2013
How do I lock the heel assembly to the...
How do I lock the heel assembly to the heel plate?
April 10, 2013
If the heel plate is positioned properly you should be able to drop the heel lock over the pad/plate and lock it down using the same motion you would to "unlock" it from your boot heel. Shown in one of the detail pics above. If the heel plate is not in the right spot it may not work as well.
December 3, 2012
what are the dimensions for the screws and...
what are the dimensions for the screws and plates on these bindings?
March 31, 2012
Do these bindings fit any tele boot? I...
Do these bindings fit any tele boot? I am looking for a binding that will work in the back country on my new Alpine lite terrain skiis in Vermont with both my old Asolo 3 pin boots (almost 30 yrs old!) and my Scarpa tele boots. I don't plan to use these at ski areas at all.
April 1, 2012
If your Scarpa tele boots have pin holes in the duckbill, the Hardwire 3-pins will work. If not, they won't.
January 7, 2011
my boots are a 22.5...this says the smallest...
my boots are a 22.5...this says the smallest it will fit is a 24. will it be possible for me to use this binding??