Ready to buy? Price protection guaranteed!
Home Page

Detail Images

Current Color

SRAM GXP BB86 Bottom Bracket

$35.00
Color:
Size:

Free Shipping on orders over $50*

GXP BB86 Bottom Bracket

Keep your crank arms turning smoothly with the SRAM GXP BB86 Bottom Bracket. With two sets of steel bearing housed in nylon cups, this bottom bracket presses neatly into a BB86 bottom bracket shell for friction-free crank turns.

  • Nylon cups
  • Stainless steel bearings
  • Compatible with BB86 road bottom bracket shells
  • Item #SRM0362

Material
[cups] nylon, [bearings] stainless steel
Claimed Weight
90 g
Recommended Use
getting SRAM and TruVativ cranks to fit on certain frames
Manufacturer Warranty
2 years

Tech Specs

What do you think about this product?

View

>Rating: 2

Only if you are in a pinch

Familiarity:
I've used it several times

I used this in a new build and it was a bad idea, sure it works fine as long as you never get it wet, I only had about 2000 miles on it and very early rode in rain or used water directly on this road bike yet the bearings completely rusted till if seized up. Plastic..cups no thanks. Get wheels Manufacturing that threads together, a massive imporovment. I use https://wheelsmfg.com/bottom-brackets/bb86-92/bb86-92-outboard-abec-3-bb-for-24-22mm-sram-cranks-black.html

>Rating: 1

Bad NDS bearing.

I.D. of NDS bearing measures almost 22.2mm leaving a sloppy fit and play in the cranks when assembled. A search reveals this is a somewhat common issue. Had no choice but to cobble something together for a race this weekend. Fortunately the DS bearing is good, which is what I truly needed.

>Rating: 5

It spins

Not much to say, its a bottom bracket. Replace every season or so and you have a fresh bike!

>Rating: 5

Works as intended, gets the job done

Familiarity:
I've used it several times

I bought a BMC Teammachine frame that takes a shimano BB86 bottom bracket but I wanted to run my SRAM Red GXP crank on it and this got the job done. Pressfit BB86 shell converts to SRAM/Truvativ GXP.

>Rating: 5

Gets the job done

Familiarity:
I've put it through the wringer

Unless you are riding TT or at an elite level where every watt counts, no need to run ceramic. This will get the job done!

>Rating: 5

best there is

Familiarity:
I've put it through the wringer

running sram or truvative, this is the way to go. **the photo isn't correct as it shows a bb30. this is truly a press fit gxp bb86(shell width)

>Rating: 5

Great BB

Familiarity:
I've used it once or twice and have initial impressions

I purchased this BB to change my FSA crank to a Sram Red crank. This is exactly what you need if you have a BB86 frame and want to install a Sram/GXP 24mm spindled crank. Installation was a breeze. I used a 32mm socket to tap the bearing cups in to place. Went in good and true and with ease. A quick note on installation: The spindle on the Sram crank is tapered. The drive side is the larger end of the spindle. The bearing cups are sized with the drive side having a larger ID than the non drive side. Therefore, make sure you install the right bearing on the right side. Bearings roll well! No problems for me with this BB.

>Rating:

I have a new Argon TT frame specified only for BB86. But i will use a Sram Red 22 crankset that uses BB30. will this BB86 ok to fit my Sram Red 22 crankset. Any comment is highly appreciated

No, your crank is not compatible with a BB86 frame.

>Rating:

Will this BB86 work in a 2015 Scott Spark with a Sram Eagle XO1 crank assembly?

Hi Robert, it looks like the 2015 Scott Spark has a BB92 bottom bracket so this would not work. As long as you have a GXP spindle you'll need Sram's BB9 GXP bottom bracket which is under our part number SRM0334 or we have some other options from Wheels Mfg as well.

No, you need BB92.

>Rating:

hi there will this work with a Scott R4 as well? thanks

>Rating:

will this BB work with Scott R4?

>Rating:

would this work with scott R4?

>Rating:

Would this works with Fuji Altamira 2.0...

Would this works with Fuji Altamira 2.0 2011 frame, i'm planning to get SRAM force crank to fit in the frame.

Yes that will work. You would then be able to use the GXP spindle.