Select Style & Size
SP-01 Tekno Superflow Saddle
The SP-01 Tekno Superflow Saddle is the lightest option in Selle Italia's Special Performance line of saddles. By using high-modulus carbon fiber rails paired with a full carbon shell, Selle Italia is able to achieve a feathery weight of 140g (S3 width) while retaining the adaptive rear frame design that allows independent flexing of the left and right sides of the saddle. This design allows the saddle to more comfortably support the alternating movements of your hips while pedaling, without compromising stability during more intense efforts. This technology is paired with a large center cutout that relieves perineal pressure and improves blood flow to the area, helping to reduce numbness or pain on big days in the saddle.
Oval carbon rails offer some vibration damping to smooth rough roads, while the carbon shell provides plenty of support for hard intervals or sprints. The full carbon construction keeps the weight impressively low, but it does mean this saddle comes with an advised 90kg (198lb) weight limit and is recommended for road cycling use only. The SP-01 Tekno Superflow Saddle comes in two sizes to accommodate most rider's sit bone widths, and uses Selle Italia's signature Fibra-Tek microfiber cover that resists tearing and abrasion for outstanding long-term durability.
- A sleek, featherweight saddle with a unique flex-engineered design
- Tail flexes independently to support hip movement while pedaling
- Center cutout relieves perineal pressure for comfort on long rides
- Carbon rails are impressively light and help absorb road vibration
- Full carbon shell provides a lightweight and supportive platform
- Tough microfiber cover resists abrasion and is built to last
- Recommended for road use only, max rider weight 198lb
- Item #SEL002T
- high-modulus carbon fiber (7 x 9mm oval)
- carbon fiber
- Seat Length
- Seat Width
- [L3] 145mm, [S3] 130mm
- Claimed Weight
- [L3] 145g, [S3] 140g
- Recommended Use
- road cycling
- Manufacturer Warranty
- 2 years
What do you think about this product?
February 28, 2020
Beware of seat getting loose
- I've used it once or twice and have initial impressions
For a light saddle the weight wasn't that impressive given the saddle consists of a full carbon rail and shell with a thin pad glued on top. The saddle I replaced was an old Trek Racing San Marco Aspide which comes in only 45 g heavier with Ti rails and can be found for about 5% of what this saddle normally costs. I've ridden a lot of saddles and generally can adapt to most but I thought I would try to really find that holy grail of saddles with this one. The cutout worked well enough given the relatively high output that I put out on my test ride. However, by the end of the ride (which was in Zwift) the saddle bolt had loosened and the saddle had slid forward on the rails causing what appeared to be cosmetic damage to the outer surface of the carbon rails. Given the very limited instructions I wasn't too confident when I installed it, but I checked and the post I was using works with 7x9 mm rails. Normally, I try to crank down a bit more on my saddle bolt but given the carbon rails it seemed like it was tight enough. The problem I suspect is that under high output this saddle flexes and given the complete lack of torque specs for specific seatpost clamps you're either going to overcrank the bolt down and damage the rails or you're going to get movement over the course of a longer or higher intensity/bumpier ride due to the extreme flexing of the shell design. The weight limit is 90 kg or 198.4 lb which I fall under and I was riding inside which generally isn't a very harsh environment for testing a saddle so maybe the rails just got scuffed a bit. It would be great if there was more in the instructions on the torque tolerances for various major manufacturers. I've overcranked on carbon before so I have a good feel for the 5-7 nm torque specs for stems and bars. All in all, the saddle worked fine though other saddles with similar dimensions and cutouts probably work similarly. Notably, their L3 is considered "wide" but for a "wide" size the actual saddle width is quite narrow. I have narrow sitbones (<100mm) and the way this saddle is designed you don't sit so much on the back as you do on the widest part of the cutout area where the padding is thickest. If you were to sit on the back of this saddle there would be very minimal padding and it was notably uncomfortable initially when I got on but once I started to hit a higher tempo there was only one time when there was a bit of numbness. All in all a cool saddle but doesn't really seem worth the price even heavily discounted.
November 15, 2019
It's What the Doctor ordered
- I've put it through the wringer
My aging body needed the extended 'Super Flo' cut-out section: it prevents most of my peritoneal numbness on 50 mi. rides. I also notice that I have less post ride numbness in my right Gluteal area while riding on the independent flex saddle and no post-ride pain in my right leg. The saddle is comfortable as well as therapeutic.