Good and Easy!

Familiarity:

I've put it through the wringer

Works well and are easy to set up. Looks good in anodized black.

Kenny V.

Love them!

Familiarity:

I've put it through the wringer

Super easy to install at home and they work great. Look good. Pretty simple and not much else needed. Highly recommend.

Tommy

Works well!

Familiarity:

I've put it through the wringer

Holds air, easy setup. Black looks great.

Brian West

Great!

Familiarity:

I've put it through the wringer

Holds air and easy setup.

George E.

Works well!

Familiarity:

I've put it through the wringer

Easy setup and holds air plus looks good in the black.

Wally R.

Works good!

Familiarity:

I've put it through the wringer

Set these up on my wheels with no issues at all. Easy setup and the black looks good.

Sally

Valve not working

one of the valves stopped working. It holds air but I can not deflate the tire.

her5334643

Great!

Familiarity:

I've put it through the wringer

Works well and are easy to set up. Looks good.

John M.

Works Great!

Familiarity:

I've put it through the wringer

Tubeless set up is easy. No issues at all. Highly recommend.

John Franklin

Dream Bike Build

Familiarity:

I've used it several times

Look clean in black, hold the air.

Cheryl K.

Good Stuff

Familiarity:

I've used it several times

Does its job and does it well. So far they've been super easy to use, no surprise, and I might stick with going with these in the future.

taylor

Does the job!

Familiarity:

I've put it through the wringer

They are easy to set up. No problems.

Henry Cho

Its a pair!

Familiarity:

I've used it several times

2 valves for 2 wheels! They will fit most any wheel. Solid for the job!

JT Nebeker

Works Well!

Familiarity:

I've used it several times

No issues at all. Does the job. Also red looks good.

Scott B.

A Little Short But Otherwise Good

Familiarity:

I've put it through the wringer

These are great and quite affordable! The base seals up and holds sealant just fine and the valve core is of course removable. I like the pop of red on these add to a bike but they may not work with everyone's color scheme. A second, longer length would be nice for deeper section wheels which are common.

Daniel

Nice!

Familiarity:

I've put it through the wringer

No problems with tubeless set up. They work fine. The red looks good.

Jim F.

Cheese

Familiarity:

I've put it through the wringer

The aluminum that they are made of is super soft. Pretty sure these are made of cheese, and not good cheese... like craft singles cheese. The knurling on the nut pretty much is non-existent after tightening them down with a pair of pliers. The valve body itself bent after I pulled the cores and put a compressor chuck on it to inflate. Not very impressed.

Ryan Lee

Does the job and looks good too.

Familiarity:

I've put it through the wringer

Nice anodized finish does not seem to flake off and the removable valve core makes inflation a breeze.

BJ Platte

Does the job

Familiarity:

I've put it through the wringer

Get some Stan's sealant and rim tape and you'll be running tubeless in no time! The included valve core remover works well. The red anodization is a nice touch and matches my hubs.

Nathan Fisher

Go Tubeless

Familiarity:

I've put it through the wringer

This pair of tubeless valve stems will get you running tubeless in no time. To complete the job, get some rim tape and tubeless sealant. The removable valve cores make setup easy and mess free.

Fritz Hanseler