Select style & size:Select options
Road Drive Pump
If you’ve broken a pump, or worse, a valve core, while frantically trying to fill your tube on the side of the road, you’ll appreciate Lezyne’s Flex Hose design found on the Road Drive Pump. The Flex Hose allows you to attach the holes to the valve, then pump air into the tube without worrying about being at just the right angle. On top of that, the Road Drive is capable of returning your tires to 160psi, so you won’t be handicapped by a soft tire for the rest of your ride.
- Flex Hose design
- 160psi maximum
- Presta valve compatibility
- Frame pump mount included
- Item #LED0121
What do you think about this product?
August 25, 2019
Threaded head unseats the valve core
I have owned three of these (2 purchased and one found on roadside) and within 18 months two have screwed me over big time. Problem is that the attached hose head threads onto the valve stem which is great (frees up hands to just pump rather than stabilize the pump/valve stem connection) until the aluminum threads begin to develop a tiny bit of corrosion and then lock much too tightly onto the valve core. Even with the ABS feature activated to release pressure prior to unscrewing, the friction at the pump to valve threads exceed the friction between valve core and stem resulting in the valve core being unseated and all air lost. This is not a solvable problem when alone on the road. Tried to really crank down the core with a Park Tool core wrench but still could not keep it seated. Nothing is more frustrating than having a patched tube, pump and a willing arm but no ability to get back on the road. Next move is a call to wife, girlfriend, UBER for a ride and a lot of cursing Lezyne. So...loved it when it worked...now thinking would never recommend to anyone a stem threaded road pump...even with ABS...unless you are also carrying a back-up CO2 system which obviously defeats the point. Back to a friction fit system like Silca ($$$$), or to a flip-lock like Blackburn or some similar make.
November 4, 2019
The other end of the flex hose is presta slip fit. I also carry a tiny valve core tool, just in case. I did have the same thing happen to me once, but now I snug the valve cores on all my spare tubes, and I’ve never had it happen again.
June 8, 2019
I have a bunch of Lenzyme products, only this one I donât like. Works poorly.
April 30, 2018
Buy one. It is useful. I've owned both medium and large.
January 29, 2017
Great Mini Pump
I bought the small version so that it would fit inside of a large sticky pod. It does this nicely. The pump hose is nice and flexible. It also lets you use it as a slip on or screw on the valve stem. When using it as a slip on I could only go up to around 50 psi before it popped itself off. You will have to hold it in place or use the screw on end to get the high pressure for a road tire. The pump works great for going to higher pressures. It will take some patience but you will get there.
May 24, 2015
Ruined my day
First time I used this pump, after a few pumps, the valve got stuck and I was pulling on a vacuum. I banged it around a bit and got it working, only to stick again. I walked my bike home, asked for an RMA and won't look at this brand again. Maybe it was a one-time fluke thing on this one pump, but in my whole life I never had a pump fail like this. In 55 years I've only replaced pumps because I either lost them, had them stolen, or run over them with my car! 'nuff said.
June 23, 2015
the pump design is quite a good one, it just requires more care than a normal mini-pump. you need to be careful to thread the "ABS" end of the hose onto the presta valve stem, and that you fully thread the other end onto the pump. also make sure that the rubber seals are all in place, otherwise you will not get a good seal and pumping will be fruitless. after pumping to pressure, purge the pump's back-pressure by pressing the ABS button, then you can un-thread the hose from the presta valve. without doing this last step, you will have significant back-pressure, which will pull your valve core right out and negate all your hard pumping effort. lezyne should be way more clear about this whole process. the documentation that comes with the pump doesn't fully explain this process, nor the need for it. once you have that down though, it's a very good pump.
December 29, 2013
the large replaced my zefal hpx
that's pretty much all that needs to be said by this old curmudgeon and frame pump hold out. takes only 20 more strokes, weighs well under half, doesn't rattle, well built and looks great. can't hit dogs with it, tho.
October 30, 2013
Pumps dont run out of CO2
Put it in your pocket and stop worrying about if you brought enough CO2 cartridges to get home. I bought mine after an unfortunate incident halfway up a climb fumbling around with my less than useful CO2 inflater; 2 CO2's later and finally borrowing a pump and I knew I needed a hand pump. Fits in your pocket fine or pick up the sweet lezyne bottle cage which doubles as a pump cradle and leave it on your bike. The flex hose is an excellent feature helping both connecting to your valve stem but saving it from damage.
March 27, 2015
Which size do you own? I'm thinking of ordering the small as it will fit in jersey pocket better. I ride roadbike only. Just need it for getting back home in case of flat.
April 23, 2015
For what it's worth, I own a medium size. If I had to guess it probably takes another 15 or so pumps to get it up to pressure compared to its larger brother, but what's another 30 secs when you're already stuck on the side of the road? I recommend the small/med to save yourself the extra weight and bulk because hopefully you'll only need to use it once in a blue moon.
April 24, 2015
I think mine is a medium, fits fine in a jersey pocket.
September 22, 2013
this pump works great! fits schrader and presta valve tubes. fits great on the bikes.
April 2, 2013
Powerful hand pump
I have only had to use this pump twice, but on both occasions it was able to get me back on the road in under 10 minutes. It inflates relatively quickly, I find that it takes anywhere from 80-100 pumps to get a 23x700 up to operating pressure, and it stores neatly out of the way when not in use. The flexible hose is a big advantage over clip on style pumps as it allows you to pump swiftly without the fear of slipping off the valve-stem (or worse, breaking/bending the valve-stem). I attach mine to my bike with a Lezyne bottle cage that has a built in pump holster. It rests closely to the seat tube, with plenty of room to clear the crank arm. Overall, a great and durable pump. I am constantly pleased with my lezyne products.
March 27, 2015
Do you own the small or medium?
November 26, 2017
I use a Tacx Tool Tube to carry a spare tire and other elements. Will one of these Lezyne Road Drive Pumps (size S) fit in it?
May 25, 2012
Does this pump work with both schrader and...
Does this pump work with both schrader and presta?
April 2, 2013
Yes it does! The hose is reversible.
September 21, 2013
Lezyne's web site says this pump is presta only: One end of the hose is a threaded Presta valve connection with ABS, while the other side has Lezyne's Slip Fit system for fast valve engagement. http://www.lezyne.com/en/road-drive
December 29, 2013
it is definitely presta only. however, the pen gauge will do either (fits the medium or large road drive). the upside is you get a gauge also.. the downside is you lose the abs which increases the likelihood of pulling out the valve core when removing it, it costs a bit more and adds some weight.
April 2, 2012
does this come with a bracket to mount to...
does this come with a bracket to mount to frame
June 5, 2012
it does. it mounts under your water bottle cage.