Select Style & Size
Find your size
Note: Actual inseam is not the same as pant inseam.
Mojo HD5 X01 Eagle AXS Mountain Bike
If you were to ask a number of experienced riders what is the "best handling" mountain bike they've ever ridden, chances are that at least a few of them will call out the Ibis Mojo HD. Ever since its introduction in 2010, this long-travel trail bike has safely carried riders through technical mountain terrain with ease, garnering a reputation as an efficient climber that's also very intuitive to ride, especially in a class where many of its peers can seem overly aggressive for most trails. With the release of the new Mojo HD5, Ibis retains those favorable characteristics while at the same time cranking up the bike's descending prowess. Drawing inspiration from their Enduro World Series pro team, the HD5 is built to tackle trails just as challenging as those found on the elite global circuit—all without sacrificing the spritely Mojo handling that makes this bike a joy to ride on tamer trails, too.
Taking a closer look at the HD5's geometry, you'll find that the reach and wheelbase figures are both lengthened, and the head tube angle is slackened to 64.2-degrees compared to the 64.9 found on the HD4. This leads to more stable handling, particularly at higher speeds, but it also improves the bike's overall balance, which pays off at lower speeds too. Ibis also shortened the seat tube length to allow room for longer dropper posts (175mm on a medium, 150mm on a small), allowing riders to get the saddle down lower and further out of the way on tricky descents. The stack height is also increased for better composure on steep terrain—a change Ibis made after taking into account the preferences of many different racers at all levels of the sport.
These changes all sound good for the gravity side of things, but Ibis was keen on making the HD5 a more efficient climber too, which is why they gave the bike a steep 76-degree seat tube angle (2-degrees steeper than the HD4). This puts the rider in a more comfortable pedaling position, but also makes it easier to control the front end on tough climbs. Along with this comes the move to a 37mm offset fork, as the shorter offset helps to calm the steering, thus improving the bike's handling both uphill and down.
On the suspension side of things, travel remains at 153mm out back. Ibis took cues from the Ripmo's travel pairing, however, and went with a longer travel 170mm fork up front. This helps to soften the bike's leading edge, but Ibis also discovered that over-forking the bike gives the suspension a more balanced feel. Since fork travel moves on the axis of the head tube angle, a 170mm fork only moves about 153mm vertically when using all of its travel—a number that matches the rear end perfectly, resulting in a balanced, confident ride. Keen eyes will also notice the switch to IGUS bushings for the lower link, like the Ripmo. These links don't rotate all that much as the suspension cycles, so Ibis found bushings to be more durable than bearings in this location, and even backs them up with a lifetime warranty for good measure.
Naturally, the bike still uses the esteemed DW-Link suspension platform. Very few suspension designs pedal this efficiently, attributable to the ideal anti-squat characteristics inherent to DW-Link. Throughout its travel, the feel is linear and very active when you need it to smooth rough stretches of trail, with enough ramp-up near the end of its travel to preserve that bottomless feel on bigger hits. These traits make the HD5 an absolute pleasure to ride, and allow it to cater to both point-and-shoot as well as playful riding styles.
Because DW-Link doesn't rely on the rear shock's compression settings to pedal efficiently and free of energy-wasting pedal bob, Ibis starting experimenting with ways to improve the suspension performance through tuning. To find the perfect tune, Ibis used an innovative data acquisition system developed by Motion Instruments, which allowed them to quantify what the critical wheel speeds should actually be in both directions (compression and rebound). After two years of research along with countless suspension tests, Ibis came up with a new system called Traction Tune. Traction Tune uses extra light damping in the high-speed compression and rebound circuits, which allows the wheels to react more quickly to changes in terrain, resulting in smoother bump absorption and glued-to-the-ground traction. By balancing this effect front and rear, the bike chassis stays flat relative to the ground as the suspension moves, keeping the geometry consistent and providing more predictable handling in rough terrain. It's a feature that Ibis's team riders were pushing for, but it provides benefits to riders of all skill levels.
Ibis continues its expert carbon frame construction with the Mojo HD5. A new carbon lay-up yields a frame that's stiffer than the HD4, all while keeping the frame weight about the same. The one-piece carbon lay-up results in a lightweight and strong frame with phenomenal stiffness, contributing to a responsive ride that tracks really well through corners and rough terrain. We also appreciate that Ibis made the switch to clean-looking internal cable routing with molded tunnels, simplifying maintenance because you can feed the housing into one hole and it pops out the other side right where it needs to be, thus eliminating the hassle of fishing inside the frame for brake or shifter housing.
Other frame details include the addition of upper and lower pivot guards, protecting areas that were historically subjected to rocks being flipped up by the rear tire. A tough polycarbonate downtube protector shields the frame from other rock impacts, while molded rubber guards on the swingarm protect the frame from chain slap and keep things running quiet. Thankfully, the HD5 still has a trusty creak-free threaded bottom bracket shell, as well as plenty of room for a water bottle in the main triangle. As for tires, there's enough clearance for up to 2.6in rubber, if desired.
This Mojo HD5 is equipped with a first-rate parts kit that starts with SRAM's new AXS wireless electronic drivetrain. If you're wondering why you should fork out the cash for wireless shifting, it starts with the simplicity. You'll never have to mess with cable tension again, and you'll enjoy crisp, reliable shifting that almost never needs adjusting. All you have to do is make sure your battery is charged and that the derailleur and shifter are paired when you start your ride. On top of that, you can customize the shifting options and monitor the system with the AXS smartphone app. Equally as impressive is the fact that the rear derailleur has 10mm more ground clearance than the mechanical versions, and is more resistant to damage thanks to a clutch that disengages the internal motor if you hit a rock, allowing the derailleur to move inward to brush off impacts and avoid damage.
Other notable parts include a nice suspension package from Fox, which includes their proven Float 36 fork along with the ultra-sensitive and supportive Float X2 Factory shock. Because many riders prefer the strength and reliability of Shimano brakes, Ibis includes XT M8120 4-piston stoppers, which provide more than enough power to keep your speed in check on long, rowdy descents—especially when paired with the grippy Maxxis Assegai tires. You'll also enjoy the Ibis S35 wheels, which are some of the best aluminum wheels we've ever ridden, offering a much more compliant ride than carbon. Ibis finishes the build with their in-house carbon handlebars, a Thomson Elite X4 stem, and a wireless Reverb AXS dropper post that mates perfectly with the XO1 AXS drivetrain.
- Ibis' flagship enduro bike is more refined than ever
- New carbon frame boosts stiffness without increasing weight
- DW-Link suspension platform is efficient, active, and smooth
- Traction Tune suspension improves traction and handling
- Longer travel 170mm fork lets you charge harder than before
- Longer and slacker geometry improves stability on descents
- Steeper seat tube is more comfortable and efficient on climbs
- XO1 AXS drivetrain provides crisp, low-maintenance shifting
- Internal cable tunnels and lower-link bushings ease the maintenance burden
- Item #IBSB065
- Frame Material
- carbon fiber
- DW-Link (v5 kinematics)
- Rear Shock
- Fox Float X2 Factory
- Rear Travel
- Fox Float 36 Factory
- Front Travel
- Cane Creek 40, ZS44/ZS56
- SRAM XO1 Eagle AXS
- Rear Derailleur
- SRAM XO1 Eagle AXS
- ISCG Tabs
- ISCG-05 with separately sold adapter
- SRAM XO1 Eagle Carbon DUB
- Chainring Sizes
- Bottom Bracket
- SRAM DUB
- Bottom Bracket Type
- English threaded (BSA)
- SRAM XG-1295 XO1 Eagle
- Cassette Range
- 10 - 50t
- SRAM XO1 Eagle
- Shimano XT M8120, 4-piston
- Brake Type
- hydraulic disc
- 180mm Shimano XT
- Ibis Hi-Fi Carbon
- Handlebar Width
- Lizard Skins Charger Evo lock-on
- Thomson Elite X4
- WTB Silverado
- SRAM Reverb AXS Dropper
- Seat Collar
- Ibis S35 Aluminum
- Ibis Logo
- Front Axle
- 15 x 110mm Boost
- Rear Axle
- 12 x 148mm Boost
- Maxxis Assegai Wide Trail EXO+
- Tire Size
- 27.5 x 2.5in
- not included
- downtube protector, swingarm protectors, upper and lower link protectors
- Recommended Use
- Manufacturer Warranty
- 7 years on frame, lifetime on IGUS bushings
California Proposition 65
What do you think about this product?