Free Standard Shipping for Orders Over $50
Home Page

Detail Images

Current Color

HED Jet 6 Plus Carbon Road Wheelset - Clincher

up to 37% Off
sale $999.99 Original price:$1,599.95

Select Style & Size

  • Black, Shimano
    sale $999.99

Free Shipping on orders over $50*

Jet 6 Plus Carbon Road Wheelset

Wheels of the deep-dish — greater than 50mm — variety excel on flat courses, but very often we find ourselves on courses riddled with hills. Now, if they were just long drawn out grades, then any deep-dish would do. But all too often, they are of the brutal switchback variety where drafting is quickly negated. The HED Jet 6 Plus Clincher is a wheelset for the switchbacks. It's a dangerous cliche to say that the Jet 6 is a 'one-quiver' wheel, but that's exactly how HED designed it. It's heavier than a traditional climbing wheelset, but for most moderate hills, it's still more efficient and inherently faster.

Over the past 26 years of engineering wheels, Steve Hed's end goal remains the same: simply make them as fast as possible. So, it's almost a given that HED aerodynamics are superb. However, what you might not know is that these wheels' aerodynamics are equally matched by their low rolling resistance. We have HED's C2 rim concept concept to thank for this. Essentially, C2 is about reduction of the two C's — less Cda (aerodynamic drag) and less Crr (rolling resistance). Accordingly, a 25mm rim width makes this possible, and is mainly responsible for the wider-is-better campaign that's been replicated throughout the market. But, you're certainly wondering, why wider? Well, the width provides what can be described as an 'aero shroud' for the rest of the wheel. This also changes the nature of the tire's contact patch with the road.

However, HED also knows that faster speeds require a heightened sense of control. This becomes evident through HED testing, as it found that rim depths which cross the forty or fifty-millimeter threshold grow increasingly more difficult to handle in crosswinds. So, HED engineered a solution that it calls Stability Control Technology, or SCT. In regards to the wheel shape, at 0-15 degree yaw angles, SCT reduces the force put on the wheels by side winds. This makes the Jet 6's 60mm depth handle more like a 30 or 40mm deep wheel in crosswinds.

HED laces the rims to its Sonic hubs, which feature silky ABEC5 bearings on oversized axles — 12mm in front and 15mm in rear. Oversized axles flex less, resulting in smoother bearing loads and less mechanical drag. And its not only the axle that received a bigger-is-better treatment, as the hub flanges are spaced as wide apart as possible in order to create a stronger bracing angle. And again, this results in increased lateral stiffness.

Easing the maintenance to the rear hub, HED included a grease port and carbon port cap. True, it's a subtle convenience, but rejoice that this capped port ensures that you'll no longer need to rebuild your rear hub after repeated washings.

As we mentioned, the fairing is bonded to the rim, which means that the spokes engage at the rim rather than at the end of the fairing. The result is not only an increase to aerodynamics, as there are no exposed nipples, but also to an increase in lateral strength. However, like all wheels, there are nipples, and for them, HED used Sapim hex-headed aluminum nipples. These are treated with a light thread-locking compound and are accessed from inside the rim. They anchor the venerable Sapim CX-Ray spokes. The 18 front spokes are straight-pull, while the 24 rear spokes are J-bend for both sides.

At the rear, you'll notice a two-cross lacing pattern on both sides. HED did this for a simple reason — with ever-stiffer frames, the force of stomping on the pedals was increasing force on the wheels, which has in turn reduced mechanical efficiency. To counteract these forces, HED stiffened up the rear wheel so that no power would be lost to wheel flexing, thus putting more power into driving the bike forward.

The HED Jet 6 Clincher Wheelset is available with either a Campagnolo or Shimano compatible freehub body. Please note that both freehub bodies accept 11-speed cassettes, and that they're easily swapped out with two 5mm hex keys. The wheels come with HED steel-shafted skewers, valve extenders, and rim strips. Also worth mention is that HED does NOT recommend these wheels for riders exceeding 190lbs.

  • A deep section wheel for speed that doesn't sacrifice braking
  • Aluminum braking surface handles the heat and rain better
  • Generous internal width improves traction and comfort
  • A dedicated carbon fairing boosts aerodynamics
  • Clincher profile for racing and training needs
  • HED continues to advance the development of aerodynamic wheelsets
  • Item #HED000M

Rim Material
aluminum, [foil] carbon fiber
Tire Type
clincher
Rim Depth
60 mm
Rim Width
25 mm
Brake Compatibility
caliper
Hubs
HED Sonic
Skewers
included, steel
Spokes
Sapim CX-Ray
Spoke Count
18 / 24
Claimed Weight
[front] 724 g, [rear] 936 g, [complete set] 1660 g
Recommended Use
road cycling, cyclecross
Manufacturer Warranty
2 years

Tech Specs

What do you think about this product?

View

>Rating: 5

vast improvement over stock

Familiarity:
I've put it through the wringer

Great improvement over the wheels that came with my bike without costing more than I paid for the bike. Instantly noticed a different with these wheels. My stock wheels were pretty standard and nothing special, but the difference going to the HED wheels was immediately noticeable all-around. These wheels roll better, are more comfortable, and engage quicker. The aero benefits are more noticeable than I imagined they would be.

>Rating: 5

Great Wheels at a Great Price!

Have used this wheels for more than a year and love them, very stiff, light and high quality, not easy to find at this price!

>Rating: 5

Great wheels

Familiarity:
I've used it several times

My specialized tarmac pro's wheels cracked so I bought these to replace with Continental 4000 tubeless and they are smoking fast! KOMs that I've tried multiple times are coming easy for me! It made my bike feel like a brand new machine! I've had them for about 6 weeks now.

>Rating: 5

Smokin' wheelset...

Familiarity:
I've put it through the wringer

I bought the white lettered 6+ here about 3 years ago for $800! The black lettered ones had just come out. Since then, I have 6,000 miles on them. Not one single issue, maintained through a bike shop only once. I run attack/force on them- the HED technician said this was the fastest aero wheelset. They are 22 and 23mm, but on the 6+ rim, they are 27 mm wide. They are smokin' fast. Easily add 10% to flat road speed. I'm mid 40s, and 190 lbs (so max rated), ASCENTS: I can't climb like I used to, but I am still ok... DESCENTS: I own every KOM locally , from 30 km HC runs to 500m declines. I have touched 61 mph on these wheels- on a 12% grade without turns stretched over a mile. Regularly I am over 50 mph... CROSSWINDS: what crosswinds? I never get blown around. Maybe it's because I'm a heavier rider... I can't imaging buying anything else...

Sounds awesome, I purchased these last week and will receive them today, I really hope they live up to Your hype... ✌🏼 Update- 08/5/20, I truly love these rims, especially on descents and flats, the difference is noticable, these hub's just flow... Happy with the purchase.

>Rating: 5

Great wheels for the money

Familiarity:
I've put it through the wringer

If you are looking for any affordable aero wheelset that wont completely break the bank, I would strongly recommend the Hed Jet 6 Plus. The aluminum brake track does not compromise braking performance like you get with some carbon wheels. The 60mm depth cuts thru the wind like a champ and the weight penalty for the aluminum rim in minimal. I run these on my tri bike with 25mm contis and have been extremely satisfied.

If
>Rating: 4

aero and stiff with dependable braking

Familiarity:
I've used it once or twice and have initial impressions

I got a couple rides in on a demo set of these wheels and have initial impressions to share. This is an aluminum rim with a thin fairing over the structural portion of the rim. You can squeeze the fairing with your hand because of how thin it is. I mention this because some customers have called in, surprised about it. The wheel itself is stiffer than I'd anticipated, and the aero benefits are noticeable. As is always the case with HED, the quality and construction are solid. Considering the depth and the benefit of aluminum braking, as opposed to a carbon brake track that you'd typically find on a wheel of this depth, the claimed weight of 1,760 grams is reasonable. I would recommend this wheelset to anyone looking for a superbly dependable, aero, stiff wheelset that comes with the safety and dependability of an aluminum braking track.

>Rating: 5

Fantastic

Familiarity:
I've used it once or twice and have initial impressions

Coming from only using stock wheels, these are an incredible upgrade. My first ride out I was floored as to how smooth and effortless they function compared to the stock wheels that came on my bike. So far I only have 70 miles on them as spring riding here in northern Minnesota is spotty. The miles I have put on have included some moderate cross winds and the wheels handled just fine, no noticeable push on the wheels. Breaking is fine, better than my stock wheels. I have had them up to 38 mph and they handle perfectly, no issues with vibration, again something my stock wheels couldn’t handle. On them I mounted conti tubes and conti GP 4000 S II. Getting the tires/tubes on requires tire levers, but no real struggle. One more thin, I did when these wheels arrived was to weigh them. They came in at 1715g, so not too far off the published value.

Coming
>Rating: 5

HED Jet 6+

Familiarity:
I've put it through the wringer

* 3/9/18 Update * A quick update - I've raced on these, crits, hilly road races, ridden them in the rain, group rides, hills, and they have been excellent! Cross winds have not been an issue unless it's really bad out! Normal windy day is not a problem, gale force winds and you are on your own. -- Original review -- I picked up a set at the beginning of the month. Thus far, I am really happy with the wheels. They look great, hold their speed very nicely, are much stiffer than my Dura-Ace C24s for off the saddle efforts and they make a nice woosh sound ;-) One note. I have an 2012 Wilier with SRAM Rival and had to get creative to make the rear brake caliper fit on these wheels. So beware if you have older brake calipers. The front brake had no issues.

*

pretty!

>Rating: 5

Incredible value

Familiarity:
I've used it once or twice and have initial impressions

I got a set of HED Jet 6 Plus wheels about a week ago, I've put about 200 miles on them. My initial thoughts are that these wheels are absolutely incredible. The aerodynamic advantages are really noticeable, the wheels are so stiff they encourage you to really put power through the pedals, and the value is unbeatable. I got these on sale at Backcountry for $1099 (they took another $150 off the sale price the day mine arrived, guess I should have waited another week :) ). When you compare them to their closest competition in terms of rim depth and weight (looking at Mavic, Zipp, Bontrager, Roval), the HEDs come in consistently several hundred dollars cheaper. Now having experienced them firsthand, combined with the fact that they're consistently well-reviewed by magazines and testers, this is the best deal for a mid-depth aero wheelset out there in my opinion.

Thanks for the awesome review Alden! Great to hear that you are happy with the new wheels.

>Rating: 4

Excellent Value, Great in Cross Winds.

Familiarity:
I've used it once or twice and have initial impressions

Four stars, because 5 stars in my world means off the charts. I will upgrade to a 5 star if they stand the test of time. I weight #170 and purchased these as a back up set of wheels when my ENVE 4.5s broke a spoke. I road them yesterday for 112 miles with 4000 feet of climb, lots of wind, and lots of motorhomes (its Alaska's tourist season). My concern with the deeper wheel was the wind. I get blown around a fair amount on the 4.5s, especially on cross winds and by large vehicles. That was markedly reduced with the Jet 6's. In fact, it was almost absent. I kept waiting for the Truck Suck, and it didn't happen. There were also considerable gusts- similarly, no problem. With a headwind coming in at an acute (maybe 20 degrees) angle, there was a little more catch with the Jet 6's, but very manageable, and just had to get used to it. The braking is excellent with standard Shimano pads. The hubs are super smooth and very fast. Also, the beefier skewers provided a lot of stability. There was no high speed wobble at 44.3 mph coasting down a big hill. I just started braking because I don't like going that fast. Twenty five millimeter Continental 4000s tires offered a plush ride, even over areas with a lot of gravel on the shoulder. They are a bit heavy, but despite that, I plan on using them as my primary wheel unless something comes up. Pros: Inexpensive, fast, great hubs, comfortable ride, good braking, great in crosswinds, fat skewers. Cons: A bit heavy. I would recommend these to a friend, especially one on a budget, without hesitation.

Thanks for the review! I've been debating on whether to get these or the 4.5s and think I will go with these.

>Rating: 5

fast

Take 20% OFF Coupon code from www.outdoorback.tk

>Rating: 5

FAST, SMOOTH, AND FUN TO RIDE

I've ridden these wheel set on the flats, undulating hills. and up Mt. Lemmon in Tucson and they are so much fun to ride. I run the tires at 70 PSI and the wide internal width of 20.5 mm makes for a super comfortable and smooth ride. The 60 mm deep and wheel shape provides the aerodynamic gains. Wheel set is light enough to climb 26 miles at a steady 6% gradient with no problem. On windy days, I don't feel like I'm getting jerk around more than my 30 mm Zipp 101 wheel set. Considering how fast these wheels are I'm surprise it's not priced in the mid $2000. Overall, very impress with the HED Jet 6 + wheel set and not to mention the ability to run tubeless makes it my favorite wheel set.

I've
>Rating: 4

Fast wheels, good value

Familiarity:
I've put it through the wringer

I fell in love with these wheels the moment i saw them. Now they have over 500 miles on then and I still love them but the honeymoon period is over and the few flaws they have are starting to show. First off these wheels are far from stiff. That being said the ride comfort it amazing, just dont expect to win any sprints on these. I have snapped a spoke already. Another flaw I've noticed is the aluminium rear freehub. Miles of climbing and hard accelerations have not been nice to it and the casset has started cutting grooves into it. A new freehub is 100 dollars which is outrageous for something that becomes trashed after a few hundred miles. Instead ill be rebuilding the wheel with a bomb proof dura-ace hub and be done with it. That being said these are amazing wheels. They handle crosswinds, headwinds, rough roads, and hills like a champ. Plus the aero advantage you get with these wheels makes it easy to put the hurt on potential wheelsuckers and ride them off your wheel on the flats and rolling terrain, its a no brainer why these wheels are big in the tri sport community.

Kinda personal, but how much do you weigh?

I was wondering about the weight as well, as it concerns the rear hub.

I weigh 175.

When you say "these wheels are far from stiff", what other wheels did you test to compare to it? Based on a slew of reviews, these wheels are quite stiff.

>Rating: 5

When on sale, unbeatable value....

Familiarity:
I've used it several times

Struggled with the pros/cons of full carbon vs alu/fairing especially given the weight difference. In the end, I went with aero vs weight with the braking advantage as a plus. Especially on fast descents, with lots of braking, I love the extra security of alu breaking surface. Mounted Specialized 24mm tires and have ridden 500k with them. Pros: - silky smooth hubs...they roll so nicely - breaking is exceptional - comfort with wide rim and lower psi - fast fast fast... You can feel the "aero" as soon as you cross 30k/Hr - shockingly good in cross winds Cons: - installation...watch the YouTube video on installing! It will save pinch flats during install... Tubeless rims are tricky - not the lightest... But with tires and cassette did not feel much heavier than my Fulcrum 1's - have not climbed much yet with them, so no idea how they will do. But they roll so well! Super happy so far.

>Rating: 5

Fast

Familiarity:
I've put it through the wringer

I love how fast these wheels are. The carbon faring gives you that extra aerodynamics to shed a few seconds on a race. You also have the option to run tubeless.

how much you weigh?

I weigh 180. If you any questions about the wheel set I am more than happy to help. My direct number at backcountry.com is 801-204-4661.

>Rating: 5

everything you need

Familiarity:
I've used it several times

Things I care about, and do the Jet 6+ meet the requirements? 1- wide internal width Yep 2- tubeless Yep 3- aero Yep 4- all weather braking Yep 5- light Yep (well, as light as any wide tubeless ready carbon clincher you can buy for even 50% more money)

>Rating: 5

Very nice wheels

Smooth, fast and light

>Rating: 5

I love these wheels!

Familiarity:
I've used it once or twice and have initial impressions

Ever since I started road training with these wheels, I've seen significant gains in average speed as well as top speeds. Also inspires more confidence on the bike. I look forward to using these for a long time.

Ever
>Rating:

Love them

Better than my mavic sls. .

Better
>Rating: 5

The Bomb !

These wheels on my wife's Cannondale Slice are the Bomb ! Plenty of clearance for 25c tires. Great stopping power when you need it. She is really happy! I drilled out the valve stem hole on the carbon fairing and installed an aircraft aluminum sleeve around a tubeless valve stem in order to run these tubeless ( you can tighten the valve against the aluminum rim rather than the carbon fairing ). No worries about flats doing triathlons with a little Stan's. great wheels !

These

Good review and great picture! Thanks for sharing.

My wife apparently ran over something that punctured the tire in two places weeks ago ( maybe during the first triathlon she did with these wheels and IRC tires ) , but Stan's sealed it. Didn't realize it until last week. I'm totally sold on tubeless - even with these Jet wheels !

Great review, could you show us the "aircraft aluminum sleeve" that allowed you to tighten the tubeless valve stem? Thank you

Here are photos showing how I made Jet 6 and Jet 9 wheels tubeless. You just need a way to secure the tubeless valvestem against the aluminum rim. Worth it to not worry about my wife getting a flat on her triathlon races. https://www.facebook.com/media/set/?set=a.10209732805817930.1073741888.1264242818&type=1&l=399de9cc1d

I was wondering how to do a tubeless conversion on these with the fairing in the way. Can you share the specs on the aluminum sleeve (diameter, wall thickness)?

>Rating:

I just recently bought these and have been very happy with them. I have approximately 500 miles on them and just had my first broken spoke on the rear wheel though, during a turn, which is slightly concerning for the price I paid and the low mileage. Question is, what are the specs of the spokes? All I have from the website is name Sapim CX ray. Length, neck and nipple type would be appreciated. Thank you!

>Rating:

I've read that the fairing/airfoil on these wheels is too structurally weak to clamp down on a bike rack. My bike rack uses wheel straps for stability although most of the holding is via an overhead arm that clamps down on the front tire. Any thoughts on this? Thank you.

Hi Evan, HED does warn not to hang bikes by these wheels or even clamp them tightly in a roof rack. Though I have heard of people hanging these on hooks and using them with roof and hitch racks, but I would still suggest being gentle when doing so. Let me know if I can help set up an order for you at mbova@backcountry.com Cheers, Mike

>Rating:

Pricing Structure Hi, on pricing structure it looks as a bargain @44%. Somehow HED has the same price of $899 as standard which is confusing (JET RC PLUS SERIES RC6 (60mm)18RC6 (60mm)24Shimano). R these same products? Wouldn't be a bargain if its so. Thanks

>Rating:

Hi. The Skewers in description from steel and other vendors have same whellset with titanium. It's wrong description? Thanks.

They come with steel skewers because of the sale price, bummer, I still bought them though.

>Rating:

Will they fit a 2019 Orbea Orca M30?

>Rating:

Hello, I have 30mm’s of clearance on the rear of my Kestral Legend between the frame. Will the rim width of these (25mm) give me a safe enough tolerance either side of the rim? Thanks

Depends on what tire you're running.

>Rating:

will these fit on an argon 18 e-117 tri with 25 mm tires? E-117 has a maximum rim sizeof 27mm so seems ok, but would like to confirm.

I have 25mm tires on mine and they spread to at least a 28mm.

>Rating:

Can I hang the bike from ceiling hooks on these? and what width tire would you recommend? Moots, Vamoots CR

No they say not to hang it

No. The carbon isn’t stiff by flexible on the aluminum hoop.

>Rating:

Is is safe to transport a bike with these wheels via a rail style rack, like the Rocky Mounts MonoRail?

yes. just fine. don't crank down too hard on the strap for the rear wheel, but totally fine otherwise

>Rating:

Will these work with my Cervelo P5? anything special i need to make them compatible? thx

They will work perfectly. Nothing special required.

>Rating:

are these compatible with a 2012 BMC TimeMachine TM02? Thanks!

>Rating:

Is this compatible with a Cervelo P2?

Hi Yvette - that wheel will definitely work in that bike. Great deep dish wheel especially if you got some hills. I cant find any info from Cervelo about max tire clearance - but these wheels would run best with a 25-28 tire to make sure the profile was optimized. Nate (natsimpson@competitivecyclist.com)

They are compatible with my P3, though you need to run 23mm tires (I run Continentals). I would suspect the clearance on your P2 is similar. They will not work with 25mm tires due to tire radius not width. Hope this helps! - John

I have these on my 2013 P2 but use 23mm tires. Had to tweak the brake pad mounts a bit. Took out the stock washers and fashioned thinner ones to allow clearance.

>Rating:

Will this fit for 2014 madone 5.9 If I use 25mm contidental 4000s' tires?

Hey Tharathorn! These should work just fine on your '14 Madone with 25c tires! I probably wouldn't recommend going up to a 28 on that frame, but a 25 shouldn't give you any trouble at all. Be sure to reach out to me directly if you have any more questions!

>Rating:

Will this fit my 2016 Bianchi Oltre Xr2?

Hi Dave -- This wheelset will certainly work on your Bianchi Oltre XR2, but will really be right on the edge. This rim is 25mm wide, which is ideally suited for tires from 25-28mm wide; however, per Bianchi the maximum tire clearance on the XR2 is 25mm. If that's the tire size you're planning on using, then go for it, but you may have trouble fitting wider tires if that's the ultimate plan.

>Rating:

How long of a stem do I need on my tubes with this wheel. Also, if I’m running these wheels can I transport the bike on my kuat nv2 rack using the latchet for the rear wheel?

Russ, I would recommend an 80mm stem for adequate length and you should have no problem using the ratchet strap on your Kuat. The only thing I would recommend is using a towel as a buffer between the carbon and strap.

>Rating:

Are these wheels able to run tubeless?

These wheels are not tubeless-compatible, but Hed's newer wheelsets are. This is the main reason why we are closing these out at such a deep discount.

HI, please disregard the answer below. These wheels will go tubeless nicely. Rim tape, valve stems, and sealant sold separately. Give us a shout if you need help selecting the correct items!

>Rating:

Hi, Do you have these available with Campy free hub body (11sp)?

>Rating:

Will these rims fit a bmc team machine slr02 2015?. Been a hed fan for years and would love a set of these. I have st swiss r23's with 25mm vittoria and it appears there is very little clearance for more. Perhaps the hed wheels with 23's?

>Rating:

Is it 650c or 700c? Doesn't state...

Hey Joseph, they are 700c

>Rating:

I have A Sram Red 10 speed cassette. Will this work with the HED 6's? Will I need to purchase a spacer?

My Hed Jet 6+ wheels came with spacers for SRAM/Shimano 10s cassettes. I am also running 10s on these wheels, no problem.

you'll need a spacer

The wheelset should come with the necessary spacer to run a 10-speed cassette.