Free 2-Day Shipping on Orders Over $50

Detail Images

  • Feedback Sports - 3/4 Back
  • Feedback Sports - Scorpion MTB Stand - Orange
  • Feedback Sports - 3/4 Back -

Current Color

  • Feedback Sports - Scorpion MTB Stand - Orange

Feedback Sports Scorpion MTB Stand

sale $44.99 $59.9925% Off

Free 2-Day shipping on orders over $50. Learn More

Select style & size:

Select options
  • Select options
    • Orange, One Size
      sale $44.99

    36 Reviews


    Repairs made easy.

    Like most good ideas, the Scorpion MTB Stand is a relatively simple, straightforward tool that's sure to make your life a lot easier. This minimalist stand helps you perform simple repairs to your favorite mountain bike without taking up the space of a traditional bike stand. It attaches to the hollow spindle of your bike's crank arm, supporting your bike with the rear tire elevated off the ground. This makes gear adjustments and other maintenance work much easier. It's also super-light and portable enough for race day, weighing in at just four pounds. The Scorpion MTB Stand comes with an adaptor to fit most hollow cranks, such as Shimano, SRAM, Rotor/FSA, Specialized, Truvativ, and Cannondale. Moreover, it works with 26, 27.5, and 29-inch wheels for compatibility with your favorite XC, trail, and enduro bikes.

    • Works with 26, 27.5, 29-inch wheels
    • Comes with crank adaptor for use with hollow crank spindles
    • Item #SCK0001

    Tech Specs

    Load Capacity
    50 lbs
    Claimed Weight
    4 lbs
    Recommended Use
    bike maintenane, bike washing, bike storage

    Tech Specs

    • Reviews
    • Q & A

    What do you think about this product?

    Have questions about this product?

    Stand Up!

    • Familiarity: I've put it through the wringer

    Great little stand that is simple to assemble and use. Put it through the middle of your cranks and you can hold your bike upright. Furthermore it lifts your back tire up enough to spin the cranks.

    Great Stand

    • Familiarity: I've put it through the wringer

    I picked up two of these for keeping the bikes front leaning on stuff in the house and they are nice and portable for using at the trail head or on trips when you need to do a little work to the ole bicycle.

    Easy to Use, Stable

    • Familiarity: I've used it once or twice and have initial impressions

    This is a great bike stand. It requires very little assembly and it comes with 3 different size sleeves so you can make sure it fits your bike properly. The colors are a nice touch. I ordered mine in Turquoise and the color matches the photo. It also makes simple maintenance like changing my tires easier to do with the bike supported.

    I wish it was more packable, as this is one solid frame without any folding or jointed parts that would allow it to pack down a little nicer. But it's lightweight and pretty small so it would be easy enough to travel with.

    Practical stand

    • Familiarity: I've used it once or twice and have initial impressions

    Works well with my X1 SRAM transmission. Stable, small footprint for space saving and well built. However does not allow free pedal spin with my DMR Vault flats

    Tips For Assembly

    • Familiarity: I've used it several times

    This Feedback Sports Scorpion MTB Stand is low profile, easy to travel with and great for small work spaces but it can be tricky to set up. It will come with two spacers, an eyebolt and the crank adaptor. It is very important to flare out the ends of the eyebolt in order to get enough friction to hold the adaptor together with your cranks (see picture below). Feel free to reach out to me if you have questions about this Scorpion Stand.

    Tips For Assembly

    Solid Stand

    • Familiarity: I've used it several times

    I got this stand so that I didn't have to flip my bike upside down or lean it against anything while I was cleaning or doing light maintenance. With that, it has served it's purpose for sure. It also helps with storage if you have multiple bikes so that you do not have lean them against each other.


    • Familiarity: I've used it several times

    I like this stand but there are a few things I don't like about it as well. It gets the job done holding your bike up and allows you to complete some light maintenance on your steed if need be. When my stand arrived the paint was chipping off and there was no hardware to keep the plastic sleeves on the arm. There are two end caps, on the stand legs, that fall off everytime I move the stand. I had to put some tape, on the inside of the stand, to prevent them from falling out. Nice to have if I need to hold my bike up without leaning on the something in the garage but don't think I would purchase this again.

    Great compact stand

    • Familiarity: I've used it several times

    I love these. They tidy up my basement so it doesn't look like a bike hoarder lives there, and they also let you check and adjust shifting while the bike is on the stand as the rear wheel is elevated.

    Awesome stand

    • Familiarity: I've put it through the wringer

    It is easy to carry so you have a bike stand at your races or events. The stand also allows you to do some maintenance on your drive train. I use it for my road bikes as well. Make sure you have a hollow crank spindle. I liked it so much I bought a second one.

    Back for more--great for Plus + tires

    • Familiarity: I've put it through the wringer

    If you've got a stable of bike that you want/need to keep on the ground, Feedback makes some great solutions. But the rear wheel rack models work well for regular road bikes, mountain bike tires (std...<2.6) and fatties (>3.7) for the fat rakk. But I've got a couple of plus bikes--that is 2.8" and 3.0" tires. They don't fit either rakk well but they play well with the the scorpion stand. As you have surmised, as the stand utilizes the crank rather than the wheel--its compatible with just about any modern mtb crankset. I''ve used turbines, aeffect and shimano 8000 so far with good results.


    • Familiarity: I've put it through the wringer

    If you are looking for a simple stand, look no further. As simple as selecting the correct fitment sleeve for your crank (multiple sleeves included), installing it on the stand in 15 seconds, and then standing your bike. Great for storage, cleaning, light maintenance, and avoiding laying your bike down. I would suggest this to anyone looking for a great way to keep your bike upright. Also, super stable, so no more worry of your bike falling over by leaning it against the wall.

    The perfect stand for cleaning

    • Familiarity: I've used it once or twice and have initial impressions

    Love this stand , it matches my bike , the adaptor fits right in my cranks..
    Not too sure where other people were coming up with it not fitting ...
    The one issue I have with it is that the spacing is kinda close when running some flat pedals, like my raceface atlas .. I was looking at it and can cure the problem with a few smaller washers and a bigger washer by the adaptor to hold it further away from the end of stub and keep the bike from walking closer to the stand , free spinning pedals ... Solved... Like that it's welded steel , gonna try and find plugs of sorts for the foot of the stand , seems mine had some plastic plugs that were broken off and fell out , makes for a good place to hide the other two crank adaptor ..

    Killer stand!

    • Familiarity: I've put it through the wringer

    I picked a few of these up to help keep the garage a bit cleaner and not have bikes leaning on everything. I absolutely love how easy these are to use, and store. Also a great thing to toss in the car for roadtrips, as it will keep you bike in one spot and not up against the paint on the car.

    Bike Leans on Stand

    • Familiarity: I've used it several times

    I purchased two of the stands which were not straight. The bike would lean to a point where the bars would not stay straight. CC easily accepted the return.

    Unanswered Question

    What happens when you take your front wheel off?does the bike just rock back onto the rear wheel?

    how does this come shipped? I'm assuming it comes in at least 2 pieces to fit a flat box?


    This will come in one box. There is no join for the upper arm to disconnect from the base.

    Shoot me an email anytime you have questions!

    Jared D.

    Expert Gearhead