Play Now, Pay Later—Financing Offered Through Klarna
Home Page

Detail Images

Current Color

Dynafit Crampon

$69.95 - $74.95

Select a Size

  • 80mm
    - Unavailable
  • 90mm
    - Unavailable
  • 100mm
    - Unavailable
  • 110mm
    - Unavailable
  • 120mm
    - Unavailable
  • 130mm
    - Unavailable

Select a Color

  • Black - Unavailable
  • Blue - Unavailable
  • Gold - Unavailable
  • Green - Unavailable
  • Orange - Unavailable
  • Red - Unavailable

Free Shipping on orders over $50*

Crampon

Sink your teeth in slopeside with Dynafit Crampons, and feast on snowy goodness. Strong, durable and tenacious, negotiate exposed, steep, and bulletproof routes with secure footing—and peace of mind.

  • Compatible with Dynafit bindings
  • Made in Germany
  • Item #DNF3108

What do you think about this product?

View

>Rating: 5

Dynafit Quality

Familiarity:
I've used it several times

These are superbly well made ski crampons. They are light and robust, so don’t weigh your pack down when not in use. Harscheisen are an essential part of your ski touring set up and should last you for the life of your bindings. I recommend getting a size wider than your skis so there is space either side for the teeth without them rubbing on the skis. In other words, go for the 100mm if your ski is 90mm wide, and so on. As always, it is a quality bit of gear from Dynafit.

>Rating: 5

works with any dynafit compatible bindin

Familiarity:
I've used it once or twice and have initial impressions

using these on Salomon MTN tech binding (which are same at Atomic tech binding). Works perfectly and the Dynafit crampon has good availability and in good size range so you can matchy-matchy as needed with your narrow, light planks or your monster powder boards.

>Rating: 5

necessity

Familiarity:
I've put it through the wringer

These are a necessity for ski-mountaineering any time of the year and for general touring in late winter and spring when sunny slopes are crusted early in the morning. Huge increase in both efficiency and safety while skinning icy slopes. As they only weigh a couple ounces, throwing a pair of these in your pack is a no-brainer! One tip - you can use a crampon that's quite a bit wider than your ski with no real downsides performance-wise, so buy one to fit the widest ski in your quiver, and you should have no issues using it on your narrower skis.

>Rating: 5

A necessity

Familiarity:
I've used it several times

It's always a good idea to carry a pair of these with you when out touring. They're extremely lightweight and easy to use.

>Rating: 5

Awesome, lightweight, super easy to use

Familiarity:
I've used it once or twice and have initial impressions

Super light, and nice and easy to install, just slide them in and they lock in place.

>Rating: 5

Works with the other AT bindings!

Familiarity:
I've used it several times

I ski tour with the Atomic Backland and Salomon MTN bindings, and I'm happy to report that thse ski crampons work well with both! these bad boys are a must have for spring ski touring when the slopes may become too icy to grip your skins but you aren't ready to switch over to booting. Lightweight and easy to use.

Very nice that you use them with other bindings. Any guess if they fit Kingpin 13 bindings? I have a 122mm width ski (aka 'monster powder boards') and it appears that Marker only lists 120mm wide ski crampons for the Kingpin 13. I'd like to try these Dynafit crampons in the 130mm width.

>Rating: 5

Do Yourself a Favor...

Familiarity:
I've put it through the wringer

These are a life-saver! The only way to do spring approaches... I've watched too many friends lose traction and take scary slides down frozen skin tracks (or mountains). Do yourself a favor and throw a pair of these in your pack!

>Rating: 5

Always in the bottom of the bag.

Familiarity:
I've put it through the wringer

After a few nasty experiences on icy slopes of death, I usually keep a pair of ski crampons in my pack just in case. They make a huge difference and it feels like you can walk up just about anything! Super light so it doesn't take much to bring them along and easy to insert into your bindings even if you're on a sketchy slope.

>Rating: 5

Essential

Familiarity:
I've put it through the wringer

Ski crampons are essential in the Tetons and I very rarely ever travel without them. This crampon is incredibly easy to use and light. A simple light piece of gear that can really make or break a day.

>Rating: 5

Wish I had these

Familiarity:
I've used it once or twice and have initial impressions

Probably the scariest moment I had in the backcountry last season was skinning across a very steep icy slope. Every movement felt like my edge could give out and I would be sent sliding toward the cliff edge below. After that experience I told myself I would buy some ski crampons. Haven't tried them yet, but I look forward to using them and having the extra confidence and security. They are also really light and very packable.

>Rating: 5

Advice

Buying these won't get your wife in the backcountry more, but on the days she does get out, it's best that every member of the team be prepared for an icy crusty slope of death.

>Rating: 5

work great

go right on and help you go right up!

>Rating: 5

Great for Skimo

Used these to climb the Grand, perfect lightweight pon to compliment your skimo setup.

>Rating: 5

Lightweight functional crampons

Familiarity:
I gave it as a gift but have feedback to share

These crampons work very well and are extremely light weight.

>Rating: 5

Perfect for when you need them

Familiarity:
I've put it through the wringer

Ski crampons aren't always needed but when they are there is nothing better.

>Rating: 5

Essential touring gear

Familiarity:
I've put it through the wringer

Ski crampons are essential touring gear in maritime or shallow snowpacks. They provide security and stability on firm snow, ice and crust when skins do not provide enough traction. Also help with steeper skin tracks.

>Rating: 4

light and grips

Familiarity:
I've used it several times

They are super light. They slide on to my older dynafits very easily (and also dont come out on their own). They assist on those super icy skinners and have certainly come in handy many times. The only negative is they wont work with the high heel riser as there is nothing to force the crampon into the snow. Maybe something can be created to insert on top of the crampon to put some space between the boot and the crampon to force the crampon into the snow? Either way, this is a great piece of equipment you should prob have for those big springtime tours.

>Rating: 5

Critical piece of kit

Familiarity:
I've used it several times

This is essential for spring touring and variable conditions. Slipping down the skin track is a fast way to embarrassment and frustration. These crampons slip into the slot with ease and will grab and keep you moving upward. Just make sure you buy large enough. There is zero flex in these. a 110mm will NOT fit a 110mm ski. Size up or buy more than one...

Thanks for the review Courtney! Super helpful to get the feedback out to the community.

>Rating: 5

Light & Fast

Familiarity:
I've put it through the wringer

They slide on my Speed Turns 2.0's very easily and provide all of the grip I need for the hard way up or the sphincter clenching traverse. I have adequate grip through the mid height setting on my heel risers.

>Rating: 4

light and grippy

Familiarity:
I've put it through the wringer

they fit super well on Dynafit radical bindings, small and easy to pack, grip well on icy slopes. ONE BIG CON: you CANT use them with heel risers! because your foot doesnt drive them into the ice when you step on your riser rather than ski. Come on Dynafit! There are some adjustments that can be made to fix that but it would be nice to have that problem eliminated sometime soon, Dynafit!

>Rating:

I am looking for a ski crampon for my Dynafit TLT Superlight 2.0 bindings that are mounted on my Scott Superguide 88 skis. Should I purchase the 90 mm? Will you be getting anymore of these in stock?

>Rating:

I bought these to go with my Dynafit Rotation 12 bindings.. and they do not fit into the slot. I figured that they should be compatible and fit. Is there something I can do? Do i need to file off some of the metal so that they fit into the slot?

Hey Charles, that is going to be a question for Dynafit, they say that it's compatible with all of their bindings. - https://www.dynafit.com/en-us/contact

>Rating:

Are these compatible with a Marker Kingpin? Need a 120mm ski crampon but that size isn't available from Marker. Have heard the Dynafits fit well.

>Rating:

My skis are 112 in the waist. Do I need the 110 or 120 crampons

Hey Blake! The 120 mm crampons are the ones you need.

>Rating:

Would these work with the first year of the beast 16 bindings?

>Rating:

Will the 100 mm fit the Salomon MTN 95?

Hey Andy - The 100 mm would be the best choice for the Salomon MTN 95 Skis. Feel free to contact me directly with any additional questions. - Kyle L. - Expert Gearhead

>Rating:

what size fits a G3 Fever ski?

So I believe that the dimensions if that ski are 132/100/123 so you will need the Black 110mm. The reason I say that is because the crampon will sit forward of the portion of the ski that is measured at 100mm. The further forward the wider the ski. Even if the area under the crampon clip was measured to be 100mm I dont think the 5mm gap (per side) would cause an issue. You wouldn't want to cut it too close with the 100mm orange crampon and have rubbing issues.

>Rating:

Are the listed weights for one crampon or for the set?

Hey Nathaniel, The weights listed are for a single crampon. Feel free to contact me directly with any additional questions. Kyle L. - Expert Gearhead

>Rating:

i have K2 Back drops with Dynafit Bindings what size do I need?

you ski is 112 underfoot. so you need the red 120. i found this info by using the google.

>Rating:

Will the 100 mm ski crampon fit on a 100 mm (atomic century) ski? Or is my best option to get the 110 mm ski crampon?

I would grab both. I will provide a free shipping label back for the one that does not fit. To be honest the 100mm might work but, the true center waist of the ski is not where you mounted your binding so it could be like 101mm where the crampon will sit. Obviously you want to get away with the 100mm but, I would put a free shipping label on it that you actually need the 110mm. You can call or email me directly. 801-736-6398, or bporreca@backcountry.com

>Rating:

Spacers? In my two previous setups, I have always used B&D crampons. The nice thing about B&D is they have spacers so that they will have more purchase into the snow when the riser is up. See attached picture. Those two holes on these Dynafit bindings seem to be designed for spacers. Does anyone know if there are any aftermarket spacers for them?

Spacers?

I found a write up on Wild Snow https://www.wildsnow.com/1813/wide-ski-crampons/. They took some pieces from an old binding and made a spacer but, Dynafit has never put spacers on their crampons. You can call or email me directly. 801-736-6398, or bporreca@backcountry.com

>Rating:

would the 100mm fit on a pair of dps wailer 99s?

Yes. the clearance is slightly wider than the stated value. And my 100mm ski crampons fit on a different 99mm underfoot ski (dynafit denali).

>Rating:

How big is too big? I would like to have one crampon to go on all my skies, but would there be any negatives to having too much space? For example a 120mm on a 90 mm ski?

I have the same question? Any help? Would 120 be too big for 110 skis???

Ideally you want the ski crampon to only be as wide as necessary to span the ski. Having a big gap (example 120mm crampon on a 90mm ski) puts a lot of torque on the crampon/binding toe interface, especially when side-hilling. This could damage or break the slot where the crampon attaches. I think you could get away with 120mm crampon on a 110mm ski but I would definitely NOT recommend 120mm for a 90mm ski.

>Rating:

i ride a jones solution 168w splitboard, but with phantom bindings and with tlt6 mountain boot. the board is 26.5.cm so each ski is 132.5mm, does the 130mm fit or do i need 140mm?

I have the 162w Jones Carbon Solution with Phantom bindings and the 130mm works for me. But I think that they are closer to 129.5mm...

>Rating:

I bought these crampons to use with my radicals ST's. The space on the hooks on the binding are too tight for the crampon to slide in. Has anyone else has this problem and know of a solution?

Yeah they can be tough to slide in. I actually broke mine because it was so tough and I put my foot down on them by accident. You can take a drummel file and remove just a little bit of the metal, that is the fix I have heard of, never tried it, I just gave up on them.

>Rating:

would 100 mm work for koa 98 skis?

Yes the 100 mm will work.

thanks!

>Rating:

How much clearance is necessary? Does a...

How much clearance is necessary? Does a 108mm crampon work smooth on a 108mm waist ski? Thanks for your insight.

It will likely be too tight. The interior dimension of the crampon is 108mm. The area that they rotate over the ski may be slightly more than 108 if the narrowest point on the ski is 108. They are also pretty stiff, so bending is not really an option. I'd size up to be sure.