Temporarily Out Of Stock
Don't get too bummed. This item is on the way and will be available for purchase as soon as it rolls into the warehouse.
Can't wait? Consider one of the other Mountain Bike Clipless Pedals we have in stock.View Similar Products
The cream of creamers.
The kitchen-utensil inspiration behind Crank Brother's mud-clearing pedal design knows no finer expression than the Eggbeater 11 Pedals. With the exception of the stainless steel spring, every bit of steel on the other Eggbeaters — body, spindle, and wing — is replaced with cycling's lightweight wonder metal, titanium. They still relish in the slop of trail life, but they approach that slop with the same aloof superiority that a three-star chef might exhibit while indulging a craving at a taco chain.
Thanks to the four-sided wing of the Eggbeater 11, it's virtually impossible to not clip in as soon as the bottom of your shoe hits the pedal. The Eggbeater wing facilitates this operation by rotating under pressure to quickly and smoothly engage the cleat. Despite the Eggbeater 11's low weight and ease of use, the platform's real strength is the lack of a, well, a platform. The pedal's open design leaves nowhere for muck to grab onto, so that easy clip-in action is just as easy in three-star mud conditions.
The included brass cleats recess flush with the tread on the bottom of your shoes for easy walking, and they're designed for two release angles (15 or 20 degrees) depending on which cleat you bolt to which shoe. Crank Brothers recommends the 15-degree setting if you're new to clipless, but going for the gusto with the 20-degree configuration will allow more body english on the bike without the worry of an accidental release.
Needle and cartridge bearings keep the Eggbeater 11 Pedals spinning smoothly and represent a marked improvement compared to the bushings used on OG Eggbeaters. When the time does come for an overhaul, you can take solace in the fact that nobody else's pedals are as easy to service as Crank Brothers'. The pedals include protective shims and all the hardware required for installation.
Please Note: Crankbrothers recommends a 200lb (90kg) rider weight limit for the Eggbeater 11 Pedals.
- One of the lightest clipless pedals on the market
- Ultra-light yet strong titanium construction
- 4-sided entry means you'll rarely miss a clip in
- Design allows for superior mud shedding capability
- Customizable float and release angle
- Premium bearings for super smooth spinning
- Double sealed system for long term reliability
- Includes premium brass cleats with shims
- Item #CRN001U
- [spindle, body, & wing] 6al/4v titanium, [spring] 300 series stainless steel
- Entry / Release
- 15 - 20°
- Claimed Weight
- [pair] 179g
- Recommended Use
- cross-country, cyclocross, gravel, mud/sand/snow, trail
- Manufacturer Warranty
- 5 years
What do you think about this product?
October 10, 2018
Light, elegant, efficient
- I've used it several times
Great for XC! They are light, they shed mud quickly, and they match my XX1 eagle gold components!
June 9, 2020
What is the Q factor for this Ti pedal? Does it have the shorter spindle that used to be available?