BB86 SRAM DUB Road
Getting a smoother spinning drivetrain starts with maximum friction reduction which is why many of the pro teams go with CeramicSpeed bottom brackets. Reducing friction at the crank is the first line of defense in nixing drivetrain drag and if your frame uses a BB86 shell and you're running a SRAM DUB crank, its BB86 SRAM DUB Road bottom bracket is the one you need. The BB86 standard allows for a wider bottom bracket shell and downtube junction, boosting frame stiffness and without metal threads, the setup usually comes in quite a bit lighter. Besides the added stiffness and gram dropping of the BB68 shell, by reducing bearing friction, you can ride for longer and faster with less effort. CeramicSpeed is an industry-leader in silky-smooth rolling bearings and the BB86 DUB bottom bracket allows you to take full advantage of the improved power transfer and lightweight design afforded by SRAM DUB with the silky smooth spinning of those famous ceramic ball bearings.
Reducing friction not only saves watts, allowing you to ride faster with less effort, but it also helps the component last longer. The Danes at CeramicSpeed are downright obsessive in its quest to reduce friction which is why it offers bottom brackets for almost every standard on the market. And if you loathe friction as much as the crew at CeramicSpeed and want to go fast with fewer watts lost, upgrade your bike with one of its bottom brackets and enjoy reduced friction as well as better resistance against contamination and corrosion.
Compared to steel ball bearings, CeramicSpeed's balls resist corrosion, which is in part responsible for why bearings start to feel gritty as they age as well as causing the bearings to run hotter which reduces the lifespan of the component. CeramicSpeed balls are also much harder than standard steel balls. Apply enough pressure to a steel ball and it will crack under load while under that same load the CeramicSpeed ball won't flinch, maintaining the exact surface finish and roundness which could affect spinning smoothness. Meanwhile, these non-round and rough ball bearings create increased friction and begin to quickly wear down the steel bearing races.
CeramicSpeed is able to achieve such top marks because it uses the highest quality Grade 3 Silicon Nitride for its bearings. Don’t be fooled into thinking that all ceramic bottom brackets bearings on the market are the same. In testing, CeramicSpeed claims its balls are 15% harder, can take 99% higher loads, and are more than 100% smoother than other ceramic balls typically used on the market. Included with the bottom bracket are dustcovers, special grease for maintenance, and a sticker sheet.
- CeramicSpeed bottom bracket for dropping drivetrain friction
- Fits SRAM DUB crank spindles and 86mm Press Fit shells
- Ceramic balls are harder, rounder, and resist corrosion vs. steel
- Grade 3 Silicon Nitride ceramic bearings offer smoother spinning
- Aluminum with anodized black finish house the ceramic bearings
- Enjoy the same friction fighting the pros count on
- Item #CMD1SPN
- [cups] aluminum, [bearings] ceramic
- Shell Type
- Shell Width
- Axle Type
- SRAM DUB
- Recommended Use
- cyclocross, gravel, road cycling, time trial, triathlon
- Manufacturer Warranty
- 4 years