Up To 50% Off
CeramicSpeed's quest to reduce friction for the masses is evident in how many different bottom bracket/crank spindle offerings it has on tap. Reducing drivetrain friction at the crank is pretty much the first line of defense in nixing additional drag and if your frame uses a BB86 shell and you're running a Shimano 24mm spindle crank, we'd like to make a suggestion for you. Pressfit86 shells allow for wider bottom bracket/downtube junctions boosting frame stiffness and without metal threads, the setup usually comes in a bit lighter. And we all know that adding stiffness while dropping weight is the holy grail, the trifecta is dropping friction too and now you can purchase the same components that pros count on to get an edge on the competition. CeramicSpeed is an industry-leader in smooth rolling bearings and the BB86 Shimano bottom bracket allows you to take full advantage of the improved power transfer and lightweight design afforded by PF86 with the silky smooth spinning of those famous ceramic ball bearings. Enjoy increased speed at the same effort, or save up the watts for a race winning move with this bottom bracket.
Reducing friction not only saves watts, allowing you to ride faster with less effort, it helps the component last longer. The Danes at CeramicSpeed are downright obsessive in its quest to reduce friction which is why it offers bottom brackets for almost every standard on the market. And if you loathe friction as much as the crew at CeramicSpeed and want to optimize your bike to go as fast as it can, upgrade your bike with one of its bottom brackets and enjoy reduced friction as well as better resistance to contamination and corrosion.
Compared to steel ball bearings, CeramicSpeed's balls resist corrosion, which is in part responsible for why bearings start to feel gritty as they age as well as causing the bearings to run hotter which reduces the lifespan of the component. CeramicSpeed balls are also much harder than standard steel balls. Apply enough pressure to a steel ball and it will crack under load while under that same load the CeramicSpeed ball won't flinch, maintaining the exact surface finish and roundness which could affect spinning smoothness. Meanwhile, these non-round and rough ball bearings create increased friction and begin to quickly wear down the steel bearing races.
CeramicSpeed is able to achieve such high marks because it uses the highest quality Grade 3 Silicon Nitride for its bearings. Don’t be fooled into thinking that all ceramic bottom brackets bearings on the market are the same. In testing, CeramicSpeed claims its balls are 15% harder, can take 99% higher loads, and are more than 100% smoother than other ceramic balls typically used on the market. Included with the bottom bracket are dustcovers, special grease for maintenance, and a sticker sheet.
- Silky smooth bearings drop the drivetrain's friction
- Fits 24mm spindle Shimano cranks to BB86 shells
- Ceramic balls are harder, rounder, and resist corrosion vs. steel
- Grade 3 Silicon Nitride ceramic bearings offer smoother spinning
- Aluminum with anodized black finish house the ceramic bearings
- Enjoy the same friction fighting the pros count on
- Item #CMD0004
- [cups] aluminum, [bearings] ceramic
- Shell Type
- Shell Width
- Axle Type
- 24mm Shimano
- Recommended Use
- road cycling
- Manufacturer Warranty
- 4 years