Select style & size:Select options
Prepare for blast-off.
Tubeless tires grant us a whole new freedom from flats, but we still encounter moments of frustration with them — particularly when it comes to seating a new tire without a proper pump. Most of us don't have air compressors at home, but fortunately Blackburn has you covered with the Chamber Tubeless Floor Pump. The Chamber Tubeless Floor Pump allows you to pressurize an air chamber by hand with the oversized Hold Tight riser bar, and release all of the air in one burst, making seating tubeless tires a breeze.
The pump has a large footprint, with an 11-inch base and 28-inch height, making it easy to comfortably pump, and a large pressure gauge sits on top in an easy-to-spot location with vibrant colors so you can easily read the gauge. It works with the flip of a Charge switch, that enables you to fill the chamber with air before releasing it all at once, and once the initial burst to seat the tire has been done, you can pump it direct-to-valve to dial your PSI into the right spot. The Chamber Tubeless floor pump rocks an Anyvalve chuck which works for a variety of valve tyles, including Presta, Schrader and Dunlop, so you don't have to stress it if you need to inflate tires on your buddy's bike. It pumps up to 50 PSI into your tire, which more than covers the majority of tubeless needs. We won't deny that blasting air into a tubeless tire at speed scares us, so we're thankful that the pump comes with a hue 47-inch hose, allowing you to keep a safe distance while pumping incase the burst of air sends your tire off of your rim in a big blast.
- A beefy pump for seating tubeless tires at home
- Pressurize the chamber for a quick blast of air
- Flip switch allows for direct to valve pumping
- Valve is compatible with Presta, Schrader and Dunlop
- 47-inch hose allows you to inflate at a distance
- Hold Tight riser bar makes for comfortable pumping
- Easy reading with pressure gauge located on top
- Air bleed button lets you fine tune your pressure
- Item #BLB003Z
What do you think about this product?
September 26, 2019
I've used this pump a decent amount of times now between my bikes and some buddies bikes. I give it about a 1 out of 5 chance that it will actually seat a tire. It's frustrating pumping up the chamber again and again and not getting that satisfying pop sound. I've owned plenty of other quality Blackburn products that I have been very happy with but this is an exception. I havent had great luck with some other brands chamber pumps either so I would recommend just spending your money on a compressor.
July 28, 2018
Best pump I have had
I was looking for a pump to replace my old floor pump. I don't have a compressor and Ive had to go to a buddies house when I wanted to swap tires. This pump has been amazing. Very well build, solid construction. Has also been great for setting up new tires.
April 30, 2018
Works as advertised! It has pumped up hundreds of tires, and seated quite a few tubeless setups without any problems. Hose is nice and long to reach tires in the highest of stands. As a tip, I would recommend removing the valve core when seating tubeless to get more airflow, and then top off. Also, the gauge seems fairly accurate but does take a moment to fall to tire pressure when pumping due to the large air chamber. Added bonus is the ability to put your favorite pair of carbon bars on for extra bling factor!