Free 2-Day Shipping on Orders Over $50*
Home Page

Detail Images

  • Atomic - Detail
  • Atomic - Detail
  • Atomic - 3/4 Front
Gearhead Pick
  • Atomic - Shift MNC 13 Alpine Touring Binding - One Color
  • Atomic - Detail -
  • Atomic - Detail -
  • Atomic - 3/4 Front -

Current Color

  • Atomic - Shift MNC 13 Alpine Touring Binding - One Color

Atomic Shift MNC 13 Alpine Touring Binding


Free 2-Day shipping on orders over $50. Learn More

Select a Size:

Select options
  • Select options
    • 90mm
    • 100mm
    • 110mm
    • 120mm

    Select a Color:

    Select options
  • Select options
    • One Color


    26 Reviews


    Shift MNC 13 Alpine Touring Binding

    While tech bindings lack reliable release ratings for a safer descent, and frame bindings weigh more than resort bindings, Atomic's Shift Touring Binding brings the best of both worlds. It's the one of the first ski bindings that's Multi-Norm Certified for boots with both tech pins and DIN release ratings.

    The Shift requires you skin in tech mode. Simply flick switches on both the toe and heel pieces to engage the toe's pins and activate the heel's walk mode. In walk mode, the Shift's pins provide the same walking stride and touring efficiency as any tech binding, with a heel riser to assist on the skin track's steeper sections. Without a frame, the Shift only weighs a mere three pounds, which isn't as light as ultralight tech bindings, but certainly lighter than alpine touring bindings and those hybrids with DIN heels and tech toes. After reaching the top of the skin track, you can flick those same switches on the toe and heel pieces to clip back into the binding like it was a regular alpine binding.

    • Touring bindings with high performance in both hike and ride mode
    • MNC accommodates tech, alpine touring, and standard alpine boots
    • DIN holds a reliable release rating for higher downhill confidence
    • Adjustable toe height allows switch between different boot norms
    • Lightweight design has wide platform for lateral power transmission
    • Low profile chassis enhance power transmission to the ski
    • Self-retracting freeski brakes stay out of the way when not needed
    • Item #ATO00DT

    Tech Specs

    Release Rating
    6 - 13
    Boot Compatibility
    alpine (ISO 5355), tech, AT lugged (ISO 9523)
    Brake Width
    90mm, 100mm, 110mm, 120mm
    Brakes Included
    Stand Height
    Heel Elevators
    2°, 10°
    Claimed Weight
    [pair] 3lb 13oz
    Recommended Use
    all-mountain skiing, backcountry skiing, freeride/powder skiing, ski mountaineering
    Manufacturer Warranty
    2 years

    Tech Specs

    • Reviews
    • Q & A

    What do you think about this product?

    Have questions about this product?

    The only binding you need

    • Familiarity: I've put it through the wringer

    After reading rave reviews I finally purchased these bindings. They do not disappoint! They are the perfect pair of bindings for everyday use, whether you're in the backcountry or ripping groomers. Durability was not sacrificed in creating these lightweight bindings. No regrets! Highly recommend.

    The One Bidning to Rule them ALL

    • Familiarity: I've put it through the wringer

    The Shift binding is a really special binding.. So much technology, thought, and passion have been put into this beautiful piece of work. Whether you like cruising down groomers and/or trees with the occasional hike up, or hiking up to charge down sweet lines, this is the binding to have..

    Some pin bindings may be lighter with similar qualities, HOWEVER, the Shift is not only more durable, but also a MNC (MultiNormCertified) binding. I've been lucky enough to deal with the DIN (German Institute of Standardization), and they test PREFECT, unlike some others.. Save your knee and buy a Shift..

    Game Changer - first generation

    • Familiarity: I've used it several times

    Figured I'd add in this amazing hype video Salomon made about the Shift binding (Salomon and Atomic Actually manufacture bindings together so essentially its the same exact binding like the Salomon Shift but different color)

    Let me know if you have any questions.

    Versatile and functional

    • Familiarity: I've put it through the wringer

    The Shift binding definitely helps solve the problem of the one quiver binding. Like any one quiver item, it isn't exceptional anywhere, BUT it is the best option on the market! I've been using my Atomic Backlands with the Shift as a one ski quiver this season and so far they have been great.
    Some trade offs -
    While I wouldn't want to do any long, spring days on this binding due to weight, I do LOVE they way they ski down when I'm in the backcountry.
    When I'm riding lifts, I have noticed a little play between the toe piece and my boot when I hit chunder, however, I have never come out of the binding.

    Best of both worlds

      The ability to switch easily from touring to downhill is awesome. Its nice having the full features of a touring binding and having the peace of mind and security of a full releasing downhill binding. When storing the skis together, the brakes are hard to get apart, which could be a good thing, or an inconvenience. Overall a solid binding with some amazing features.

      Cutting Edge

      • Familiarity: I've used it once or twice and have initial impressions

      Atomic and Salomon really knocked it out the park on this one. These things are super light and descend like resort bindings.

      Believe the Hype! / Note lowest DIN = 6

      • Familiarity: I've used it several times

      Not much to add to the other reviews as far as performance goes. Pretty awesome and an impressive feat of engineering. As someone new to touring who will mostly be skiing at the resort, I love that I can have a one ski quiver for both with minimal compromises.

      It's stated in the tech specs but may be worth repeating here: the lower limit of the DIN settings is 6, so if you're a very small/light person like me, you won't have many options in terms of DIN. If you usually ski at a lower setting you might be better off with the Kingpin 10 or the Fristchi Tecton, both of which go down to 5.

      Tour mode - toe lever up!

      • Familiarity: I've used it once or twice and have initial impressions

      These bindings held up well during a couple of alpine days, although no jumps for me! A few reviewers noted that the toe lock in Tour mode isn't very stable. Make sure you're putting the toe piece all the way up - it should be vertical and the arrows at the base should be mostly out of view. Takes a bit of extra pressure to get it fully locked & vertical, but this is the intended tour mode.

      what you need to know.

      • Familiarity: I've put it through the wringer

      This binding overall is a game-changer.
      I will skip the "its great downhill and uphill and wow and amazing" Those things are all true, but I have some things to say if you are considering this binding that I would want to know myself if I was in the market.

      1. I can't tell the difference between this and another alpine binding on the downhill, I have dropped 25+ foot drops without a problem BUT it does have a higher stack height (distance between the boot and ski) because of the tech necessary for transitioning between two versions of skiing. (alpine and touring)
      2. The locking mechanism for the toe is fine, but needs a little more oomf. you can feel it sort of pop into place to lock the toe in touring mode, but it has slipped down on me while on full day tours. when you lock the white toe tab down for alpine mode it has a strong click, why not duplicate that for locking it up?
      3. the heel is flawless. some people have had complaints about the brakes hitting something on the uphill and releasing down into ski mode, as long as you size your brakes correctly and use good skinning technique I don't see this being an issue. hasn't been for me at least.
      4. MOST important, you HAVE to adjust the AFD plate on this binding so that it puts the correct amount of pressure upwards against the toe sole of the boot. if you don't, you will get wiggling up and down in the toe and pre-release. your local shop should do it while mounting but I have talked to many who had to do it themselves. (including myself)

      This binding is less than a pound heavier than most tech bindings, so don't worry yourself on weight. I would focus on ski weight more if you are concerned than I would of the weight of this binding. If you are an experienced skier I would set the DIN .5 or 1 number high than you usually do.
      Overall I would 100% recommend it, just know what you are getting and have fun!

      Amazing would be an understatement

        Walk up, ski down, repeat. These bindings are next level. I have been on a set of tech bindings for the past 10 years, and have always been hesitant to see how hard I could ski them before they failed. I am incredibly happy to see Salomon/Atomic release these finally after years of teasing. Now, never fear an early release while in the backcountry.

        Good. Not Great. Yet....

        • Familiarity: I've used it several times

        Don't get me wrong, these are game changers. They ski downhill like a downhill binding and they go uphill like an AT binding. And while heavier, that is a non-issue except for the most pathological weight junkies or pure ski mountaineers.

        However, the walk/ski toggle is finicky. The toggle locks into place with a subtle "pop" but in future versions that mechanism needs to be made more solid. I had the binding pre-release while skinning in deep snow 2x because the tab slipped out of Lock mode. From that point, I simply monitored the tab to make sure it was in Lock mode but that gets tedious over a long day of skinning.

        It should be a simple fix.

        A whole new class of binding

        • Familiarity: I've put it through the wringer

        These bindings do a good job of combining downhill security and uphill maneuverability. The ability to ski in a solid alpine-style binding with DIN adjustment while using touring boots is incredible. I also love how comparatively light these bindings are, but I worry about their long-term durability. It seems like a lot of plastic that could break- time will tell. If you are used to a Dynafit-style pin binding, these will take some time to figure out and adjust to how they function, but it is well worth it. I imagine these are the beginning of a whole new class of bindings.

        Inbounds - Great, Touring - Also Great

          Ive skied this thing hard inbounds. I used to race, so i put a lot into my turns. The binding has held up perfectly! It is also great for touring. Large upgrade from the Marker Dukes.

          Versatile binding

          • Familiarity: I've used it once or twice and have initial impressions

          I have used these a few times and I am so far loving them. Great bindings if you only want to own one pair of skis. I love that I can tour at them and use them at the resort.

          Do it all

          • Familiarity: I've used it several times

          This binding is really your one-quiver binding. Great for touring as it's not too heavy (though not a super-light binding to be clear) but burly enough to feel in control when you're pushing it.

          Super Stoked

          • Familiarity: I've used it once or twice and have initial impressions

          Initial impressions only here, haven't had a chance to use them but they seem like a reasonable weight for what they are and I'm excited to take them out. Love that I can ride my 111's in the backcountry and at the resort.

          so far, so good

          • Familiarity: I've used it once or twice and have initial impressions

          I'm really excited about these bindings. Having an adjustable toe and and AFD are really great features that finally got worked into a touring binding. Being able to click into a tried and true alpine set up for the downhill without the weight and stand-height of frame bindings like the Duke is awesome. I have only checked them out initially, so once I have some days out on them, I will come back with more feedback. So far though, I'm pumped.

          Very Excited

          • Familiarity: I've used it once or twice and have initial impressions

          Unfortunately I am also still waiting to put these to use, but have some initial thoughts. Finally seeing these in the flesh and feeling them I think Salomon/Atomic struck a perfect balance of weight/strength. Sure these are heavier than the true tech competition, but they feel robust enough to actually trust as a resort binding so I am happy to give up the weight.

          And in my opinion, a little bit of weight is not a huge deal since the weight sits on your skis, and is not something you have to lift up with you as you tour. For those going from frame touring bindings I'm confident it will be an absolute game changer. For those switching from lighter tech bindings, I think it will come down to just how highly you value that true alpine feel on the downhills.

          If you crush super long tours and move fast you'll probably rue the weight penalty, but if you're like me and suffer through short-mid length days of touring in hopes of finding challenging terrain/features on the way down, I think these have some insane potential.

          Will comment back here once I've got a few days on them. Mounting on some Line Sakanas.

          Finally got these bad boys out. As expected, they were awesome. Everything functioned great up and down hill. Still can't comment on longevity, but if these things prove reasonably durable I'd say they really are the "game changer" that atomic/salomon was going for.

          Very Impressed

          • Familiarity: I've used it several times

          I was finally able to get out and put these bindings to the test this past weekend for three hard days of skiing. I always had a feeling that they would tour super well but was curious about the downhill performance/ capability. THESE THINGS ROCK! Hardpack, chunder, powder, cliff drops, wind lip jumps... you name it they can handle it. I was running them at 10din and had zero issues with pre releasing. I highly recommend this binding to someone looking for a great solution to weight and performance in their bindings.

          Very Impressed

          Haven't Used Yet

          • Familiarity: I've used it once or twice and have initial impressions

          Waiting on new pair of touring skis before I get these mounted up.

          That said, it's hard to contain my excitement the first time I pulled them out of the box. The engineering on hand is beautifully elegant. For a sport that has long been marred by compromises in gear selection, this really does seem like a game changer.

          Can't wait to put turns on these later this month.

          I have the same question as another person. What crampons work with this binding??? Can’t find info on this and it seems to be the only shortcoming.

          Hey Brandon

          , We don't carry any ski crampons that are compatible with these bindings. I can't seem to find any online either that are specifically compatible with these bindings! This appears to be the only downside!

          What brands of crampons will work with these?

          Hey Hans,

          We don't carry any ski crampons that are compatible with these bindings. I can't seem to find any online either that are specifically compatible with these bindings! This appears to be the only downside!

          Yeah, I can't find any OEM crampons at USA retail sites. The slot seems similar in size/shape for a Dynafit crampon, but I wouldn't want to force it and crack the toe plate if it wasn't specifically engineered for that. Awesome binding. But on icy steeper tracks, crampons are a big help.