Free Standard Shipping for Orders Over $50
Home Page

Detail Images

Current Color

3T ARX II Team Stealth Stem

Temporarily Out Of Stock

Don't get too bummed. This item is on the way and will be available for purchase as soon as it rolls into the warehouse.

Can't wait? Consider one of the other Gravel & Cyclocross Stems we have in stock.

View Similar Products

ARX II Team Stealth Stem

There’s a time and a place for loud and flashy. Sometimes that place isn’t the cockpit of your bike. The 3T ARX Team II Stealth Stem adds a touch of elegance to your cockpit with a subtle, matte black finish that downplays the Team stem’s stiff, lightweight performance. The Arx II Team continues the original’s tradition of simple, classic construction — but with a design that drops grams from its already low weight. The ARX Team takes the classic, tubular design of the ARX and further refines it with slightly flattened sides and a sculpted faceplate.

The ARX II Team stem's faceplate crimps in tighter at the top and bottom, which results in an ovalized appearance. However, even with the new shape, 3T was still able to retain its hallmark cut-out logo. This generation of the ARX also sees a more precise installation process than previous models. Instead of a traditional four-bolt Allen assembly, the ARX II features a Torx assembly at the faceplate and a single M6 bolt to clamp the stem to the steerer.

  • Item #TTT002W

7075 T6 aluminum
80mm, 90mm, 100mm, 110mm, 120mm, 130mm
Steer Tube Diameter
Bar Attachment
4-bolt Torx T25
Claimed Weight
[size 110cm] 125 g
Recommended Use
Manufacturer Warranty
2 years limited

Tech Specs

What do you think about this product?


>Rating: 5

Can’t beat the price

I've put it through the wringer
True to size
Size Bought
5` 11"
175 lbs

I needed a longer stem to get my bike fit right. I have relatively short legs and longer torso so a frame size with the proper reach has the saddle slammed down to the top of the seat post! This one, in 130 size, was perfect. A bit heavier than the 100 CF one that came with the bike but I’ll never notice those few grams and the price sure is right! Had to buy a couple of torx bits for my torque wrench to install, but no big deal. As is typical with my orders from Competitive Cyclist, it was delivered sooner than indicated.

>Rating: 5

One Downside

I've put it through the wringer

Great stem! It does what it's supposed to do while looking good. The stealth look goes with any bike and the shaping is very attractive in my opinion. Weight is decent as well. It hasn't slipped at all and isn't overly stiff so the only downside as others have mentioned is it needs a T30 to tighten the steer clamp. I'll probably switch that out so I can adjust with a multitool.

>Rating: 5

Great stem

I've put it through the wringer

This is a great stem I needed something that was much shorter after a bike fit and this did the trick. It looks good and matches my bike. There is a bit of an issue with the different bolts though. You will need to have a T30 and T25 wrench with you to do any adjustments.

>Rating: 4

Solid Stem

I've put it through the wringer

Excellent stem, stiffened up the front of my bike when my other stem flexed when out of the saddle. The t30 stem bolt is a minor annoyance, but the stem is worth it in the end. Stealth colorway matches my all black bike well.

>Rating: 3

Stem sell.

I've put it through the wringer

This stem's stealth looks set it apart by helping it blend in. I've got a 2003 Italian frameset, and there's a lot of branding and aesthetic flourishes on it. The 3T Stealth lets the frame do the talking without clashing.

>Rating: 5


3T is one of the best (and oldest) manufacturers of cycling cockpit components (posts, stems, handlebars) in the cycling world. 3T stands for Turin Tube Technology and was founded by Mario Dedioniggi in Northern Italy in 1961. In 1975 Dedioniggi was the first person to use aircraft grade 7050 aluminum alloy in cycling cockpit components. Lots of experience here. This top-of-the-line aluminum stem utilizes 7050 aluminum alloy for the body and titanium torx bolts (strong, lightweight). The front plate bolts are T25. The steerer clamp bolt is T30. This 3T stem is a work of art. Lightweight, strong, functional, and beautiful. If you own an Italian bike (Bianchi, Pinarello, Wilier, Colnago, De Rosa, etc.), it would be a crime not to use a 3T stem, bar and/or seatpost. Install note: I recommend using a torque key or torque wrench to tighten the stem's torx bolts down per spec (5.5 Nm front; 8 Nm rear). And if you have a carbon handlebar, I highly recommend using a torque wrench and a small swipe of Finish Line "Fiber Grip" paste ($6/tube). Don't overtighten. And you don't need to if you use a torque wrench and grip paste.

>Rating: 4

2 Different Torx Bolts

I've used it several times

Good build, good looks but before you buy know that this stem uses T25 and T30 Torx bolts. If you're like me, this required an additional purchase of a T30 bit and multi-tool. Unless you've got both of these Torx sizes covered, you're going to be spending some additional money.

GOOD info. I am in exactly that situation - one torque wrench set with just one torx bit. Moving on to another stem...

>Rating: 5

Wonderful Stem

I've used it several times

It uses a Torx bolt which will repel stripping from chronic over-tighteners. It is light. It is stiff. It is black. It holds my bar. It has not loosened. It is good at being a stem.