Find Your Store
Home Page

Cart, contains 0 items

When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Expert Help
Earn Rewards

Yeti Cycles
SB-95 Carbon Mountain Bike Frame

Be the first to review

Out of Stock

Don't worry though, we have a lot more Trail Full Suspension Bike Frames in stock than that.

Shop Similar Products

The wait is over.

When Yeti released the carbon fiber version of its venerable SB-66, 29'er fans worldwide started wondering when the SB-95 would get the carbon treatment. Well, after six years, the wait is over, as the Yeti SB-95 Carbon Mountain Bike Frame is here. And true to its 'Super Bike' designation, you're looking at a sub-six pound trail bike frame with five inches of travel, and the strength and geometry to tackle anything that you'll find on your next trail ride.


The SB-95 Carbon is the latest frame in Yeti's lineup to be graced with its proprietary Switch Technology suspension platform. And while it's a new frame to the lineup, Yeti already has two years of production on the alloy SB-95, as well as years of prototyping the platform. So, this brand new bike is already exceedingly refined. At a glance, it's easy to mistake the Switch platform for a linkage-driven single pivot, but hidden underneath the blue anodized hardware is an eccentric pivot. Essentially, this turns the SB series into a whole different beast.


The eccentric pivot is basically a smaller pivot that's housed inside of a larger one. As a result, this system provides Yeti with an extra degree of control over the forces involved in the suspension action. In the beginning of the SB's five-inches of travel, the pivot rotates towards the rear axle. This means that it's rotating opposite the direction of pedaling forces that are being applied through the chain. In translation, it neutralizes the pedaling force. So, the SB remains stiff and responsive under power, rather than allowing your pedaling force to influence the suspension. This way, your watts won't go to waste.


As the bike compresses into the bottom of the travel, the eccentric link changes direction, rotating toward the front axle. This forward rotation keeps the chainstays short under full-compression, which keeps your weight centered in a neutral position relative to the wheelbase. And that all adds up to predictable feel and control throughout the entirety of the bike's travel. Better yet, the SB-95 Carbon is easily serviceable for home mechanics with basic tools.


As for the upright link driving the rear shock, it works in conjunction with the eccentric main pivot to provide a firm, responsive ride that's still capable of erasing the roughest of trail chatter. And it has the added benefit of boosting the lateral stiffness of the frame, which keeps your bike tracking straight through G-outs, hard turns, and unpredictable terrain.


The high-modulus carbon fiber construction of the SB-95 Carbon not only yields beautiful lines, but it also drops roughly two pounds off of the weight of the alloy version. Better yet, it simultaneously increases the strength and stiffness of the frame. Thankfully, though, the geometry of the carbon frame remains unchanged from the alloy version. The 67.5 degree head tube angle is on the slack side for a 29'er, which provides stability and predictable turning when you're riding wide open. The 13.5-inch bottom bracket height positions your feet below the centerline of the hub axles. In turn, this design yields a planted feel on rough terrain, and helps the SB-95 Carbon carve up turns like a freshly sharpened scalpel. And, on top of all this, 17.5-inch chainstays keep the '95 lively and responsive, while also providing plenty of climbing traction.


The SB-95 Carbon takes a 44/56 tapered inset headset. So, you're able to take advantage of the added stiffness of a modern tapered fork. The bottom bracket is a threaded 73mm shell, which makes installation and service a breeze, while also helping to avoid the creaking associated with PressFit bottom brackets. Mounting a front derailleur requires an E-Type direct mount. Or, if you prefer a chain guide to a front derailleur, there's replicable ISCG mounts available in both the ISCG03 and ISCG05 varieties. The rear wheel attaches via a 142x12mm rear through axle, which utilizes Shimano's QR through axle. The rear brake mounts to a standard post mount, which accepts rotors from 160mm to 185mm. Additionally, the 30.9mm seat tube is compatible with almost every dropper seatpost on the market. And speaking of dropper posts, there's cable routing underneath the top tube in order to keep your cable arrangement clutter-free. And on the topic of cable routing, the rear derailleur cable is routed internally through the rear triangle.


The Yeti SB-95 Carbon Mountain Bike Frame is available in four sizes from Small to X-Large and in the colors Turquoise and Raw/turquoise.


Please note that US Yeti dealers are prohibited from shipping Yeti bicycles to any country other than Canada, Mexico, and the United States.


Frame Material
high-modulus carbon fiber
Suspension
Switch Technology
Rear Shock
Fox CTD Trail Adjust Kashima
Rear Travel
127 mm
Head Tube Diameter
ZS44/ZS56 zero stack tapered
Headset Included
no
Bottom Bracket Type
73 mm English
ISCG Tabs
yes, removable ISCG mount
Cable Routing
[front triangle] external, [rear triangle] internal
Front Derailleur Mount
S3 low direct mount (e-type)
Derailleur Pull
bottom
Compatible Components
Shimano, SRAM
Seatpost Diameter
30.9 mm
Seat Collar
34.9 mm Salsa Flip Lock
Rear Axle
12x142 mm thru-axle
Recommended Use
all mountain
Manufacturer Warranty
2 years

What do you think about this product?

View

Selecting an option will reload the available reviews on the page

Sorry, we don’t currently have any of those types of reviews for this product.