Free 2-Day Shipping on orders over $50*
Memorial Day SaleMemorial Day Sale
Detail Pics

Description

Versatile racking for your factory side rails.

The Yakima RailGrab Tower does exactly what its name implies—it latches onto your factory side rails and doesn’t let go until you say so. No matter what kind of rails you have, this set of four towers installs in seconds and is easily removable. The low-profile design gives your racking system a sleek, streamlined look, and with the optional SKS locking cores (sold separately), your gear’s not going anywhere.

Share your thoughts

What do you think of the

Yakima RailGrab Tower

? Share a...

No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

  • Product review:
  • Share a video
  • Share a photo

How familiar are you with the product?(optional)

Invalid filetype.

Save

Here's what others have to say...

5 5

samp415264

Member since 

Bought these for my 07 Dodge Durango with the factory side rails, The iinitial set up took about a half hour to complete so now once that was done they are simple to take off and put back on as needed. I don't like driving around with them installed being they are a little noise. Overall great product

Unanswered Question

I am having trouble finding a rack that...

amap454091

Member since 
Posted on

I am having trouble finding a rack that will fit on the factory rails for my 2011 Kia Sorrento. I was assured another brand would fit only to find it didn't. The Yakima looks like a good solution but I am leary given my past experience. Also looking at other notes, will it be shipped with the right claw size for my car? My son just qualified for nationals in snowboarding and we have a road trip coming up in 10 days. Thanks for your help!

Will they fit a 2013 Subaru Outback?

Rvrrats

Member since 
Posted on

Will they fit a 2013 Subaru Outback?

Laura

Member since 
Responded on

They fit my 2000 Outback, I'm not sure how similar the new Outback factory racks are to the old ones though...

5 5

Peter Gram

Member since 
Groups:

These towers do just what the name suggests, grab on to your factory rails. I added them to a Subaru Outback. Installation was straight forward, with the required Allen wrench included. To install, there first is a height adjustment, then a bolt to tighten to grab the rail, and another bolt to tighten to clamp down on the bar. End caps are included, so no need to buy extras. Pick up a round bar and some locking cores, and the system is ready for a rack.

Will the Yakima RailGrab Towers fit on a...

Roger Conover

Member since 
Posted on

Will the Yakima RailGrab Towers fit on a 2007 ford expedition EL with factory rails?

Matthew Niedermiller

Member since 
Groups:
Responded on

Yes this will fit. You can use 48 in bars. However on the vehicle that large I would use the 58 in bars to give you more room on your rack for bikes, boats, cargo box, ect. You will need to use the small claw that comes with the rail grabs. Locks are not included, but are recommend.

5 5

Mity Maitzen

Member since 

Great design, solid material, has numerous adjustments and will fit just about any factory rail. Once I got it I noticed these are on a lot of cars and all attached to the factory rail.
I got this for a 2006 BMW X3.
It is worth getting the 6 or 8 locks pack, so you have one key for everything.

trying to find what will fit a 2011...

eebling

Member since 
Posted on

trying to find what will fit a 2011 mitsubishi outlander sport with factory base rails. They are raised a few inches and run parallel down the roof but with no gap underneath between the rail and body, so i think i need one of these "grab" style connections. Anyone out there know what will fit correctly.? thank you.

Josh Chapman

Member since 
Responded on

Hey,

Yes, sounds like this is what you're looking for. Just to be sure though, use the "Car Rack Configurator" at the top of this page. It is the blue and orange banner just above the product picture.

Will these towers work on Sequoia factory...

Mike

Member since 
Posted on

Will these towers work on Sequoia factory roof racks? Do they come with locking device as wel or is that extra?

Dean Whitehead

Member since 
Responded on

Hey Mike, the picture here on BC is just the backside, the front has locks built in (see my pic)... and YES they will work with your factory rails...

Hey Mike, the picture here on BC is just the backside, the front has locks built in (see my pic)... and YES they will work with your factory rails...
5 5

KrazyGirl152

Member since 

Instructions were easy to follow and installation was a breeze. After a few adjustments it fit securely on my factory rack. I purchased locks separately and those work great as well.

4 5

KrazyGirl152

Member since 

Instructions were easy to follow and installation was a breeze. After a few adjustments it fit securely on my factory rack. I purchased locks separately and those work great as well.

4 5

KrazyGirl152

Member since 

Instructions were easy to follow and installation was a breeze. After a few adjustments it fit securely on my factory rack. I purchased locks separately and those work great as well.

4 5

KrazyGirl152

Member since 

Instructions were easy to follow and installation was a breeze. After a few adjustments it fit securely on my factory rack. I purchased locks separately and those work great as well.

4 5

Adam Benson

Member since 

Getting a canoe as a wedding gift meant it was time to invest in a roof rack. I weighed my options between Thule and Yakima and eventually went with the Yakima RailGrab due to the ability to switch vehicles in the future if necessary (as long as it has side rails). The multiple claw sets that come with the system allow for a fit more geared towards your specific vehicle.

After a couple weeks of use I can say the RailGrab tower set works great on my 1998 Subaru Forester. The towers feel solid and haven't shown any sign of moving or sliding even after transporting my 80+ lb. canoe down the highway at 70 mph.

The initial set-up wasn't too bad. Once I understood the instructions and how the individual components came together it went pretty quick. It took me a little bit longer to get it dialed in just how I wanted it but now that it's on I shouldn't have to move it ever.

I'm a little disappointed that the locks are sold separately. It seems that if they are such an integral part-- which if your living anywhere where your rack is in danger of being stolen or you want that extra security-- they are, then they should come as a kit. However, one advantage of buying locks separately is that you can buy enough to lock the rack as well as accessories without having multiple keys-- just make sure you buy enough.

If you're looking into a rack system I would definitely recommend the RailGrab for anyone who has side rails on their vehicle, especially if you want the ability to transfer it to another vehicle in the future.

Adam Benson

Member since 
Responded on

One thing that is also important to ask Backcountry.com is if this set comes with the medium claw or if you have to buy it separately. Yakima started packaging the medium claw with the system in fall of 2010 so make sure you are getting that included.

Just another note to 1998-2002 Subaru Forester drivers-- despite what I read from numerous other sources, the medium claw was NOT what I needed. I tried it compared to the small claw and found the small claw fit more appropriately. Make sure you establish all points of contact that Yakima recommends.

Will the Rail Grab towers fit on top of...

Gene Wright

Member since 
Posted on

Will the Rail Grab towers fit on top of the VolvoT-rails and clamp into its side grooves ? Will my Round crossbar slide thru the towers and extend beyond the towers (so I can haul 2 kayaks side-by-side)??? Are they lockable? Thanks, anybody . . . .

Laura

Member since 
Responded on

I can't answer your first question, but yes the round crossbar will slide through the towers and extend beyond and yes, they are lockable.

View all contributions... Be patient, it might take a while.