Switch your Technica Cochise boots from alpine to tech with a few turns of a wrench.
The Tecnica Interchangeable Alpine Touring Boot Footprint is the backcountry complement to your Tecnica Cochise boots. Just unscrew your original DIN soles using the included allen key, replace them with the tech-binding-compatible footprint, and go hunting for fresh tracks. One size fits all.
- Compatible with Technica Cochise series boots
- Designed for use with tech bindings
- Allen key and screws included
- One size fits all
Share your thoughts
I'm confused by the conflicting descriptions...
I'm confused by the conflicting descriptions here -- are these to allow fitting to a tech binding? Or a DIN alpine binding?
We actually sell both the Tech and the DIN options through this product number but currently we are sold out of the Tech Soles which is why only the DIN option is showing up.
Has anyone tried using these tech soles...
Has anyone tried using these tech soles with the dynafit radical bindings? Is it 100% compatiable? I am using the Cochise 90 with the tech soles and am hoping to get dynafit radicals on my Rossi Soul 7's.
I have these soles on my Bodacious boots and have used them with dynafit radical bindings, they will be compatible on your cochise boots as well.
Yep, I have the Cochise 120s with these soles, works perfectly with the radical FTs.
Are the Tech Soles compatible with DIN...
Are the Tech Soles compatible with DIN bindings? I own Salomon Gardian 16 touring bindings and I'm looking for more traction when walking on my tecnica boots.
It's sort of a grey area, it's not something you can do with a binding like the marker duke, since the toe height is set, but with the Guardians the toe height is adjustable and you adjust to have your boot sole floating instead of relying on an AFD plate for proper release of the toe. Basically, it's not a definite yes or no, you want to take them into a shop so that the toe height can be properly adjusted to the sole to guarantee that they will release but it is possible.
Swappable soles for Any Cochise boot.
- Familiarity: I've put it through the wringer
These soles work for any of the Cochise and Demon ski boots. If your DIN soles are just worn out you can replace them with the DIN option. If you want to swap the DIN soles that on your Cochsie 90,110,120,130 with some Tech Compatible AT soles get the Black Tech Compatible soles. There are 4 screws in the toe and three in the heel that screw into metal inserts in the boots. The soles also use a bit of a dovetail system so they need to be slid off forwards and backward to be removed.