Out of the box, what's the assembly status on this bike? Is it as if it were shipped from Santa Cruz, meaning all you need to do is install the fork, adjust cables and you're good? Or, do I have to install the headset, bottom-bracket, derailleurs, run cables, etc.?

Tech Specs:

Frame:

Aluminum, single pivot 

Fork:

Fox 32 Float RLC 

Shock:

Fox Float R High Volume 

Front Travel:

5.5in (140mm) 

Rear Travel:

6in (150mm) 

Wheelset:

DT 5.1 w/ DT 340 hubs, DT 14/15 spokes, 32 hole, alloy nipples 

Front Derailleur:

Shimano XT FD-M770 

Rear Derailleur:

SRAM X9 

Cage Length:

Long 

Shifters:

SRAM X9 triggers 

Crankset:

Shimano SLX CS-M660 

Teeth:

22 / 32 / 44T 

Crank Arm Length:

[M] 175mm 

Bottom Bracket:

Integrated 

Brake Levers:

Avid Elixir CR Carbon 

Brakes:

Avid Elixir CR 

Rotors:

[Front / Rear] 185mm / 160mm 

Headset:

Crank Brothers Directset xc/am 

Head Angle:

69deg 

Handlebar:

Easton MonkeyBar EA 70 lowrise, 31.8mm 

Handlebar Width:

[M] 30in (685mm) 

Grips:

Lizard Skin Peaty lock-on 

Stem:

Easton EA 70, 31.8mm 

Stem Length:

[M] 90mm 

Stem Angle:

6deg 

Chain:

SRAM PC 991 

Cassette:

SRAM PG 980 

Range:

11-34T 

Tires:

Kenda Nevegal folding 

Tire Size:

26 x 2.35in 

Tubes:

Kenda Freeride Presta 

Seatpost:

Thomson Elite 

Seatpost Diameter:

30.9mm 

Seatpost Length:

367mm 

Saddle:

WTV Pure V Stealth 

Seat Collar:

Quick release 

Weight:

[M] 28lb 11oz (13012g) 

Recommended Use:

All-mountain, Bottle Opener 

Manufacturer Warranty:

2 Years