Clothing

Gear

Accessories

Gear Question

Marker Baron Ski Bindings

Item #MRK0010 | 0 in Stock

I am 6'1'' 175 lbs and a 8.5-9/10 skier. I enjoy...

By Ranked #33 - Alpine Touring Bindings November 19, 2008

I am 6'1'' 175 lbs and a 8.5-9/10 skier. I enjoy skiing fast and aggressively. On my resort skis, I am currently at a 10 DIN but that is just for everyday cruising and small resort jumps. I will be setting these up on some fat skis for touring this year and plan on hitting some decent sized cliffs and backcountry booters. I will obviously be cranking my DIN up for these instances but am not sure to what point. Any advice on whether I will need the increased DIN of the dukes or will the Barons do the job?

Helpful Votes: 0 Yes | 0 No

By Ranked #3 - Alpine Touring Bindings December 1, 2008

You could go either way. if you are very hard on gear or plan on this being your main(or only) setup go Dukes. A din of 12 is pretty good, most ppl can get away with the barons but I like the security in having a bombproof setup that I am SURE will hold up.If you are going to be hucking 20+ footers, then go with the Dukes. Keep in mind they are a bit heavier and you will be penalized with that. I am 5'10" 170 and I ride the Barons... I charge pretty darn hard, but am not dropping anything bigger than a 10 and footer and I like to be able to keep the legs fresh for multiple laps. You would think the extra weight wont matter much, but it does after 4 to 6 hours of charging and skinning. It also depends on your boot set up... if you have lighter AT boots then go for the Dukes. If you have a heavier AT boot then I think you can get away with the Barons.

Helpful Votes: 0 Yes | 0 No

Tech Specs:

Material:
Plastic, stainless steel, aluminum 
DIN Rated:
Yes, up to 12 
Boot Compatibility:
AT, alpine 
Brakes Included:
Yes 
Brake Width:
110mm 
Heel Elevators:
Yes, 6 and 12 degree positions 
Weight:
[Pair] 5lb 6.4oz (2450g) 
Recommended Use:
Backcountry, resort skiing 
Manufacturer Warranty:
1 Year 
Close This Window

Change me.