to use only one comparative between those two... LONGER woudl be it. The Silver Ridge is ever so slightly longer in the body

Honestly, I have never felt a need to reach for them in this jkt.

A large will scrunch down to the size of 6 golfballs. it is amazing for waterproof breathability and still a fixture in my lineup... after many advancements. I highly recommend it

well, providing that your monitor/iPad/whatnot settings have this backdrop as a bright white, this color is pretty true to life. It is certainly NOT an electric shade like a post-it nor is it as dark as a palm.

conan is right... it is an abrasion resistant woven paint with Omni Shield (a proprietary DWR) to make it quick dry and water resistant. It is not waterproof.

yes. 2 external

the raintech does not have an additional zipper for that kind of interface. The Ten Trail is the only current model that will zip into most other Columbia component jkts in the same size

to address the first question, this will not zip into the component shells. the zipper length and guage are different. It is lower profile to layer well with a shell or component piece

that's awesome, Dave. This jacket is the unpuffy puffy

roll the hood inwards and the velcro on the back of the hood loops through the... errr.. loop on the neckline.

both leapfrog and Palm are close in color but lose some pop in the photos above. The Leapfrog is a rather vibrant yellow/green and the palm is a rich kelly green.

vibrant green = Palm
pop yellow with some green = leapfrog

steven's right and this color is bright... 'great visibility

A medium will work quite well for you in this waterproof breathable jacket. It breathes very well and can easily wear as a windbreaker.

Sorry to be a party pooper, but it is 3 point compatible (cuff-cuff- and bottom of collar). the OH material on the inside is reflective and not insulated, and did not justify the removable capability

it does drop about 1.5" from front to back. functional without being too noticeable

It is not a bulky jacket and will repel both water and wind.

yes it does, and the low-profile toggles are tucked away.
not only is the hood removable, the feaux-fur is removable from the hood too. my wife loves this one so much that she bought it in a second color... and she went with the white.

Medium is 25" from the bottom of the collar to the bottom of the back. There is no closing pocket on the interior, but there are two stuff pockets with the construction of the hand pockets

34degrees F, moderate sleet, and predawn skies with no sun at all, I took this for a 5 mile run. I wore only an Omni Freeze T-shirt under it and running pants. I stayed warm, dry and protected from the elements without overheating. i heated up, but no more than i would have otherwise and it breathed well.

I am not used to running with a hardshell and this moved well, keeping me visible on the roadside. The red colorway is 100% stretch material, whereas the black is not (70%ish)

titanium badging is moving to the top of the top of the top of the line. This is a very capable piece and is kicking butt. The Peak II Peak and Peak Power get the Titanium badging, depending on season

there is no zipper and it is super easy to access

This deals largely with torso length, and I can say that this model is rather generous enough to cover the backside

the sizing block on the side is quite helpful, and the ease in exchange in unparalleled if it does not fit as you desire

This will not but the Ten Trail will zip into Whirlibird, Bugaboo, Hells peak and many more past models of 3-in-1 jkts

This will not but the Ten Trail will zip into Whirlibird, Bugaboo, Hells peak and many more past models of 3-in-1 jkts

no liner...
no zip out skirt...
where is that detailed? I think the model here is not what you saw instore

Mike is right. It is lined with a lofty, long-nap fleece, and shelled with a wool/acrylic woven. This is an amazing piece that is not totally windproof

I am about the same size as you and prefer the Large. I can layer under it and have plenty of freedom to move.

Steven is right and it is also cut for everyday use and versatility

This model-- the Lite-- does not have Omni Heat insulation and loft. Both this and the traditional Heat Elite II have OmniHeat reflective dots on the inner surface.

BouBou said it backwards. The Lite model does not include OmniHeat insulation. It is correct that they both tout OmniHeat reflective detail.

it is fitted through the arms and shoulders, roomy throughtout and then fitted again at the waist. this is a go-to item in multiple colors for my wife

A sample in large weighed in at 27oz.

There is a Columbia Falls III pant that outsold or outpaced the hoodie. It is hard to find anymore. It does match the Anytime and Just Right materials from Columbia quite nicely

it has drawstrings to close it on the face a bit.
as i recall, it is snapped onto the main body of the jkt

Eric is right... and that lands about 1/4 over the bottom in most cases

No, it does not have a powder skirt

Absolutely

it's not super noisy and it's not a softshell either. It is a quieter fabric with the nylon compostition

it is light on the scales and on the body... heavy on the insulation

burnt henna is RED.

these ride at the waist. the sur le peak rides lower

leave it to cotton, wool, and low-grade fleece to shrink. this will not

It cleans very easily and is quite stain resistant. providing the staining agent is a high surface tension (water, mud, scmutz ofvarying consistancies, it will brush of with a little snow usually. ketchup, mustard and similar low surface tension agents will wash out easily still too.

2.2 lbs in size medium

this uses a carbon fiber filament and it does have one in the thumb in the lateral aspect only

nothing like the low grade nylon ones out there. this one is rather tame

is "awesome" enough of an answer? it is vibrant and nowhere near as bright as some other reds in the F11 line from Columbia.

warm enough depends largely on outside temp and duration of exposure. this is fleece and will not fend off snow or wind. this is a great fuzzy warm piece to insulate under a protective layer (blanket)

Large will do it

the lite has no insulation and will run lighter and cooler. the insulated Heat Elite II is super versatile and great for the colder temps... perhaps as low as 25 degrees cooler than what the lite can tackle

with some insulation beneath, yes.

on it's own as a parka for warmth? no. look at the wildcard

go check the Whirlibird

http://www.backcountry.com/columbia-bugaglove-max-electric-glove-mens

here's the men's version

It is helmet compatable and has OmniHeat all the way down the sleeve.

-25 with the batteries disconnected! It will go significantly colder with the Omni Heat reflective and Omni heat electric adds

this is a great shell and light jacket. its "memory" callout is that it will nto wrinkle and its memory will keep it straight

absolutely. A tech wash and light, tumble dry is all it needs... a brief kick of heat is great for fluffing it up (30 seconds)

If your shell is an XL, get an XL ten Trails for zip in compatibility and a better interface altogether

yes, there is an adjustable waistline on this jacket

the heat elite is insulated and the heat elite lite is not. Both have OmniHeat reflective, and the Heat Elite has OmniHeat insulation too.

Med is a 32" inseam

it is a snap. you are correct

31" is what i have in my spec book

snaps at the top and bottom, with velcro a few times in the middle. It does have pockets inside, as i recall

one snap at the top and one on the bottom... velcro intermittently between.

it is not a slender cut, nor is it oversized. it makes allowances for layers and still looks feminine

The center back on this jacket is 33". the standard length jacket is 25.5" and all measurements are from a size medium

25.5" from the bottom of the collar to the bottom of the hem in back.

Pat's right... an XL will give you a bit more torso length without too much more sleeve length

the lining did not have room for venting similar to the shell. the liner is not vented

red. there is an exaggerated POP on this screen, isn't there?

my wife bought her true size too, and Maggie's right... it is flattering on curves!

It is machine washable and quite warm. it manages heat well and will not overheat very readily. An alternate choice woudl be the Lay-D-Down. both are beautiful and warm

there is no internal zipper for an addional lining piece to connect as an interchange. it is still cut to allow for mobility with layering

Jaimie is right... there is no venting under the arms. the front pockets are mesh and will allow airflow.

it will not zip in, and it will attache at the cuffs and back of neck

for extra accommodation for longer limbs, I would consider the Med. It will allow more clothing beneath and not be too much space to heat

thi sis my new daily driver in the Denver area. It is light and offers great hgeat retention on the cold snaps. slightly heavier is the Key Three, and an insulated one is the Wildcard. You can easily ski in the wildcard!

your best bet for a zip-in interchange jkt is the Ten Trails. there are many others that are 3-point compatible (sleeve, neck, and sleeve secured)

here's a collection of facts to illustrate it...
It is cut like the Geocache, uses OmniHeat insualtion instead of down, and has baffle lines and sheen like the Chugach. It is a great jacket on its own!

The way i discuss breathability in clinics to simplify it is this way: breathability should not imply a straight shot through a membrane. the OmniDry Membrane is 70% lighter than the big name membrane and everyt bit as waterproof. the breathability is unparalleled and does not contain EPTFE-- a material that will never decompose. I use this as a travel jacket into cold for a windbreaker and a rain jacket as well

Embla's right. Plus, you can see the liner by itself under hte name Rebop Jacket

a Medium will work well for you, I'd say.

they are the same. the benton for girls has a slightly more slender shaping with the panels, and they are the same size

XS for sure. she will love this. the sleeves do have velcro cuffs and will seal nicely on a pair of gloves. the side pockets are generous and a great place to stow the hands away from the cold

they are super cool to the touch and will block the sun. smaller numbers and team names can be applied. I would suggest heat transfer vs embroidery, due to the stretch

this item is not built domestically.

the shell is built with some more duarability than many puffy jackets out there. is is a comfy piece with not too much sheen and it insulates very well. The OmniHeat is proven effective and is certainly here to stay. Omniheat does a great job at leveling the huge temperature flux with exertion in the elements.

Short answer... It works very well

this piece runs a longer than most. it was built this way for articulation in the sleeves and for the ability to tuck it in. I am normally an LT and a normal L is sufficient for me

teh liner jacket is a softshell piece with OmniHeat reflective on the inside. It's what i chose for my son

this model does not.

they are not at all heavy... Techlite EVA is a proprietary chemistry that makes it super lightweight and insualting from the snow below. the straight math is this: A single size 7 weighs 433g/15.3oz. That's less than a pound per shoe and it is very well insulated and cushioned.

Whil i have the specs out, I can also add the height of the boot shaft... 11"

It does! and it goes back on really nicely too!
that was very smart alecky, and I apologize for that. I will say that not all removable hoods are this clean in finish work and easy to use. It's a beautiful jkt, and the liner piece on its own is beautiful too

it will fit into a bag that size with ease... An XXL, of course, will be a bit more snug in that bag, and all other sizes will be easier.

a Small would cover the bill well. There is crossover when the 18/20 and SM are set next to each other, and the 18/20 is a bit bigger

It really depends on how bulbous the helmet is, and I have to say that first. It will accommodate an average sized helmet providing the coverage over the brain stem isn't too extensive. There has been very little response to the contrary, and I just want to make sure you are aware of it before you step into the backwoods

The center back length is what i can proved and that is 30" it is from the center of the top seam on the back down to the hem.

the watertight jacket is a very nice shoulder season and summer rain coat. It is totally waterproof and more breathable than most jackets int he category. I would eye the Greene Trail or Hail Tech as alternatives... Or get the Outside Magazine Gear of the Year jacket... the Peak 2 Peak. treat yourself to the most breathable waterproof jkt out there

absolutley! wash normally, tumble dry low and hang it

yes it is insulated... with 140g poly insulation.

absolutely... look at the answer above for Tara.

absolutely. it is 700 fill power down and lined with OmniHeat... making this a sleeping bag with sleeves. I have the Men's version and it worked well at an event in -35F... of course, nearly everywhere else i was cold.

this is a fleece piece and not wind resistant. as an insulator it will do well, but on it's own it may come up short

and the liner is hooded... 'kinda rare

In many cases, bulk accompanies the abundance of pockets. In this case, it is aimed at hiking and travel, where users would have a pack or purse to carry any items that would normally go in the pockets.

there is no shelf bra in this piece

that depends largely upon the outside temp and what softshell. this is a great microfleece and layers well

Oxide is reasonably bright whereas the dk turquoise is more of a richer jeweltone

this pack flattens well and has fantastic rebound when it's released. it's super lightweight and will be a great basecamp bag

Stick with the medium and you'll be fine.

they are both built on the same fit and sizing blocks. you will wear the same size in both

the pants are bibbed and have a fleece upper body to them. this is a greaat way to keep the kiddos warm and dry

A great baseline to use is this...
15F in most conditions without high winds and high humidity, providing there are good layers beneath and the head, necl, feet and hands are also covered well

with the drawcord, this youth size shoud cinch down now (fashionably, of course) and will work for a good time to come

each element on its own can work and together it will be great for the really cold times. The shell is waterproof breathable and very durable, the zip out liner is a softshell with Omni Heat on the inside and OmniShield (proprietary DWR)on the outside

this is a softshell pant with insulation. It regulates and will be much quieter and softer than a shell

center back length of a 10/12 is 26"... that's from the bottom of the collar to the bottom of the garment

There are two huge differences between the two jackets you mention here...

The Best Dam Down Jacket has OmniTech... It is waterproof/breathable on the outer shell. The other jkt is not

This one also has a 700 fill (90/10) and it has OmniHeat reflective detail inside

... Making it the most efficient insulation and more breathable waterproof membrane on the market.

smaller than the traditional elements of Columbia? smaller may not be fair, since this pant fits curves so much better. the waistline itself is smaller than the traditional fit of Columbia

This jacket is fantastic for your application. It is lightweight, packs away small and will keep you dry without the clammy feel. It isn't designed to pack into its own pocket, but it will come out of your bag and shake out to not look like a raisin.

yes there is... and this is one of the only fleece pieces in the line that ZIPS into a Bugaboo

Titanium is the calssification of the top of the top product for that season. It usually means that distribution is super limited and it includes one of the best new technologies.

In this case, The Peak 2 Peak is brand new and contains the OmniDry membrane. It is ultrabreathable and every bit as waterproof as the top membranes. It breathes and does not get clammy on the inside. OmniDry is also polyethylene and not on any watch-lists in some countries, like similarly touted PTFE membranes can be.

Lastly, the titanium name may be on one season and fall off the following season. it will not get reattached unless the technology is updated. If all titanium pieces kept the TITANIUM badge, Columbia would turn into a 100% superlative brand. this would easily explain the similarities between different model year jackets and the toggle of the Ti badging

they are passthrough pockets, or unlined pockets on the sides to access pant pockets under them.

it will not zip in due to differing zippers. It will attach at the cuffs and top of the neck with tabs

ooops.... and it is lighter weight altogether.

this is more of a power stretch fleece with a smooth face. This surface is superior for layering, offerng little resistance to sliding on of outer layers. It is a little slimmer cut than the Ballistic through the ribs and cuffs

the hood will roll up and tie it down into the collar with the hood adjustment tab on the back of the hood. that is super helpful on windy days!

the hood will roll up and tie it down into the collar with the hood adjustment tab on the back of the hood. that is super helpful on windy days!

one side is fleece with reinforced shoulders and elbows. the other side is a solid shell of the reinforcement material offering a water resistance that is unparalleled for youth and is quite wind-resistant. stick with the 8 for sizing. it will not run small

those color combos you state are correct. the coal accent is more of a yellow than green

"Still effective after 70 washings," is what the EPA allows the verbage to read as. most of the data showed 90 efficacy then too

it has a zippered fly

it is definitely not see-through. the knit is closed and concealing

this is normally a slimmer cut than most PFG pieces. It is also cut from ultralight tamiami fabric-- a lightweight and cool polyester

This is not designed to pack into itself. It will fit into smaller stuff sacks however

11" inseam

I love this jacket and these questions bring to light why
- it is fit to layer a little but not a heavy fleece. it is quite good at managing heat alone
- the outer is treated with a durable waterproof repellancy (DWR) that is applied much differently than others. it will not soak, and the insulation will not either. i used this for drizzly days in gropple and mixed precip.
- the outer is also a tightly woven, slick fabric that will not snag easily.
- the hood is built to fit over a helmet, but the bulbous variation of helmets won't allow me to say ALL helmets.

will you dig this jacket? Absolutely

the biggest difference is the Lander is gussetted throughout the entire inseam and leg, whereas the ROC is not

The Columbia Harper Trail will suit this request quite handily. it is built to move and stretch without billowing (?)

Dwayne is correct on this one. It has the two chest pox and one on the sleeve. It was built to be light and not have pockets near waist straps and belts of backpacks

this is a rain shell pant, designed for lightweight packability. There are no bagged pockets however there are through pockets, allowing access to the pockets of shorts or pants under this pant.

to chime in just a bit... an XL will give you plenty of freedom in movement, and a Large will just make it to the wrist.

the answers below are a bit confusing... the 10K is refering to the waterproofness. 10m of direct water pressure will not permeate this fabric, and that's about 6X the pressure of a 250lb man on one knee in a puddle. The breathability is in question here and OmniTech is testing more breathable at temps closer to body temperature. most other membranes need that clammy feel to work, and OmniTech does not.

There is also a lightweight mesh lining in this that will protect the membrance from abrasion. It is intended for warmer weather and not built for insualtion

Mike is right that if it gets warm enough, just about everything is hot. I will say this, however... This felt the least plasticky and it was breathing long before my other 2.5 layer pieces from the past ever could. Omni Tech is breathing better, faster, and more quietly.

The Greene Trail is the men's version and they both tout flex composition in strategic areas that still breathe like the main body does.

on my foot, I will say they ran 1/2 size big.

Personally, I think a medium would do very well. I am 6', 190lb, long-waisted and a Large covers me.

Great point! This elastic is generous and not too snug. the thermodynamic sofshell has half elastic / half velcro. The Sawyers Creek has neither!

there is only one colorway that offers a pink hue and that is the liner and lining of the Black Print. It is a darker pink

it is al very lightweight, easy breather made with a nylon shell and mesh drop-lining. the high friction zones are reinforced with a tafetta.

It is quite wrinkle resistant, and not quite wrinkle proof.

it does not have a membrane or taped seams. It is treated with a great DWR called OmniShield.

The Thunderstorm does have all of these atributes.

Hello. these measurements are based on a W's Med.
2" longer in the back than front
23" from the apex of the underarm
Sleeve length is something Columbia is rather generous with. I am comfortable in saying that it will fit you, providing you keep to your regular outerwear size.

I hope this is helpful

these are certainly not a Dickies cut, and they do offer some great freedom of movement. It is an active cut, and less baggy than the Ultimate ROC

the Hail Tech hood rolls up and gets out of the way. What this model aslo has is minimalism without giving up quality, necessities or simplicity. When I could buy a jkt for double the price of this one for accounts, I still reached this one for the bang for the buck/weight/space.

you can easily let this one ride low for comfort and sit on your hips. It is super stable and lightweight. If you want a little bit more length, go for the XL

the rise on this is considered a mid-rise at 10"

It switched from S-M-L sizing to waisted sizing in S11. beyond that, an improved belt is the only other notable change i can think of

this jacket will offer great wind resistance with minimal bulk or weight. if you are facing a consistent, cold, humid wind, consider the Code 9

this is a loaded question so please pardon the bullet points.

- the UROC is made from a softer fabric that is more durable for abrasion and rougher usage.
- The UROC is also treated with OmniShield-- a proprietary DWR agent-- that makes this piece water, stain, and wrinkle resisntant like no other.
- The UROC will offer a roomier fit through the seat and leg as well as a phone pocket on the lateral thigh.
- The ROC is still one of the best sellers due to its classic feel, durable fabric and ability to dress it up
- For a heavier fabric, consider the Utilizer II

sorry i missed the second part... the medium fast trek will be more snug, and still your size.

the Benton Springs touts a heavier, more loosely woven fleece with a roomy cut for everyday use. The Fast Trek is is more fitted with a tighter weave, making it slightly better for layering

it is warm with 150g insulation and a rugged shell. It is also treated with a very durable water repellancy, making it a fantastic piece for fun in the cold

it is a pinkish red and reasonably rich. I discussed it as this: think of a pink eraser on a pencil that has been moistened with water. it is a little more red than what you'd imagine from that too.

I hope this helps

yes, they are zipped. I have replayed the presentation of it 10 times in my head and recall zippered pockets

Burnt Henna is a brighter red. you can see it here
http://www.backcountry.com/columbia-silver-ridge-shirt-short-sleeve-womens

to address the sizing,... I am 6'1" and 200lbs... i am terribly long-waisted and fit a Large with ease. It is a generous cut, and, with no lining it was built for low-profile layering if you need it.

a large will be a bit roomier and unrestricting. the opening is 12" around at the leg

this hood has a drop mesh lining that has an elastic crown on it. It fits quite similarly to a FlexFit hat and makes the hood turn with your head. It's quite refreshing to turn you head and not look into the side of the hood

this has a little insulation, whereas the Storm Surge does not. They are both waterproof and more breathable than any other membrane pant out there

it is 26" from the bottom of the hood to the bottom hem. it is not sized to cover the rump, but the Rumble Rain is at 31"

abrasion resistance is certainly a concern and design detail on these pants. The primary directive is lightweight sun protection that is easily converted to a short. With that being said, many fly fishermen use this pant for water approach to combat the reeds and grasses that would otherwise scratch the skin.

Is this the kevlar-knee pant that will scuff its way up the most abrasive surface? No. Will is fare well in the fun? Absolutley

Pardon me poking my nose in here but I have a little more info on this. David is right that most 3-in-1 jackets have a component piece that zips in on b othe sides. This one does not and anchors on the cuffs and neck only. The reasoning in other instances include:
- with some fabrics and designs, having the component zip into the shell made a firm front with 3 zippers in the front. with softer fabrics, it can can bunch up when seated.
- the absolute nature of a zip-in piece makes for too much of a coverage change when opening the zipper even a little bit.

With this garment, the front stays soft and pliable, as it allows for covering the neck with the liner and opening the shell to vent.

I hope this helps. Personally, I prefer zipping my component pieces separately anyway. I can access interior shell pockets without losing all body heat.

I just erased my first response....

Medium will be a great size for you as an everyday jkt or as a midlayer for layering. if this will be an outer only, and you have long arms, try the large

these are regulars, or 32", unless specified usually. Short inseams are clearly marked and separated to properly identify them on the packaging, in orders and online

I would suggest an XL. it will be a bit long, and that will help cover your rump in a rainy campsite.

The Heat Elite is an insulated fleece that is windproof. It has both OmniHeat insulation as well as OmniHeat reflective detail

The Thermodynamic Softshell is a softshell with OmniHeat reflective detail only, and no insulation otherwise.

Both tout OmniShield DWR repellancy and are 3-point interchange compatible. the Heat Elite will stadup to lower temps better on its own, whereas the ThermoDynamic will need a little more insulation on the coldest days

The Heat Elite is an insulated fleece that is windproof. It has both OmniHeat insulation as well as OmniHeat reflective detail

The Thermodynamic Softshell is a softshell with OmniHeat reflective detail only, and no insulation otherwise.

Both tout OmniShield DWR repellancy and are 3-point interchange compatible. the Heat Elite will stadup to lower temps better on its own, whereas the ThermoDynamic will need a little more insulation on the coldest days

are you feeling the expansion under the forefoot? it does soften a bit with a small number of flexes on the side and there shouldn't be any ridge or diving pressure on the top.

a little 98.6 heat and a few flexes should cover it

the Thermodynamic does not have pit zips. The Heat Elite does. the picture of the gentleman shows a Heat Elite

oooooooooooooops... i forgot to say that it does have zippered pockets.

there is a bit of a sheen to it, but not so much that is deterred buyers. the sheen was well received and will return next year. It looks great, and it shed moisture very well

this jacket is warmer and more versatile than the other model you questioned. the shell has tricot lined pockets and the line has them as well. the liner is one of my bes selling pieces and it looks awesome by itself (kaleidoslope)

they are a tricot material that is soft and warm.

the liner is insulated, and the shell is not... without using semantics gymnastics, the shell becomes insulated with the liner zipped into it.

i have tested this material and find that with proper layering, you can beat the biggest chills with the eastern humidity as well. when the chair slows or you think you're going to dip in temp, flip up the hood. it is remarkable how it warms up

the heat elite, just right, and I2O are all fleece models with thumbholes

the pull down menu up on top shows an assortment of colors and sizes to choose from.

this link says the same

http://sales.liveperson.net/hc/s-9551721/cmd/kbresource/kb-6161079812335441039/view_question!PAGETYPE?VisitorProfile=BCS&sp=94&sf=101133&documentid=239851&action=view&MESSAGEVAR!home=no&MESSAGEVAR!cookie=no

this link says the same

http://sales.liveperson.net/hc/s-9551721/cmd/kbresource/kb-6161079812335441039/view_question!PAGETYPE?VisitorProfile=BCS&sp=94&sf=101133&documentid=239851&action=view&MESSAGEVAR!home=no&MESSAGEVAR!cookie=no

you can find the sizing chart when you add it to cart and look at the righthand side of the screen, usually. bccom is awesome at helping you get it right the first time

this one does not have the 3-point tabs in the cuffs and neck. the peak ascent does

a Tall version is made with a 36" inseam.

stick with the small on this one. you are going to dig this jacket!

this jacket has critical seams sealed but not a membrane. this is a highly water resistant jacket, treated with the columbia proprietary DWR solution, Omni Shield. If you want a waterproof breathable jkt, consider the Tiget Hybrid from Columbia

stick with the same size. This is a refined fit block on a fantastic garment. I chose this one for my wife and have the men's equivalent myself. It will not disappoint

this is a great insulator when added to a barrier shell. On its own, it will not protect from the wind or driving moisture

pardon the re-run answer...

this is a great insulator when added to a barrier shell. On its own, it will not protect from the wind or driving moisture

I chose this one for my 4 year old girl.... i was prepping for the worst, and ended up getting impressive results. she lovezs the look and there is rarely a complaint. When it hit -5F, I too complained

this has the space but not the attachment (zippers or snaps) for a zip in liner or interchange piece. this is a fixed insulation garment.

This will run true to size and err to the larger size ever so slightly. The Geocache will run in the other direction and a little shorter altogether

it is shown on the border above if you scroll around. I will tell you that it shows it as a little deeper/richer than it is in sunlight

this jacket is generous in the arms and will fit nicely in a Larger for you. I have a tremendous ape index, and my arms rarely fit jkts. this one fits me fine and i still have mobility

It's closer to a 300 weight fleece. It's lofty and light, and not intended as a windbreaker

It's OmniTech, making it more breathable and every bit of waterproof as the other membrane... 20m

personally, I'd heat it up. it manages temp without overheating. it adds no weight by having OmniHeat either and you'r etalking a cooooold sport

it is a hung mesh lining with taffetta in high abrasion zones.

Check to see if one of the zipper teeth has spun. It looks like a loose tooth and off axis. I have only seen this once before and you can super glue that tooth into place. if it deosn't work, it is a warranty-able concern

- elderberry is a burgundy color. more purple than brown.
- it certainly does not have a wet look, and the sheen has proven to be favored over the matte finishes on some other models

They were on the prototype and widely rejected. Comfort cuffs without a thumb-thong/gluff capability were deemed unnecessary on this garment and it was removed for production

this is not all black. It has a dark gray on it as well. the picture below is fantastic

compared to the other brand, this runs a little more generously. A medium will be great for you

compared to the other brand, this runs a little more generously. A medium will be great for you

the outer is treated already with a DWR that is super resilient and does not ask for treatment before wear. Snow seal on the outside will choke the breathability of the membrane within. Personally, I am not a fan of that for a breathable boot.

yes it is... Flexible waterproof breathability

hmmmmmmm... more red if put against a hot pink. It is a pomegranat-ish hue, with a noticeable pink in the red.

too confusing?

Great points, Mike. I will add, that with still too many coats in my own closet, I reach for this one more times than not for skiing. It's quiet, soft, waterproof, and a great weight for insulation and heat management. In Whistler, CO, UT and a trip to VT, this was the one I brought each time

the fabric is waterproof, but the seams are not sealed. Garments having both are hard to find in youth sizes.

the fabric is waterproof, but the seams are not sealed. Garments having both are hard to find in youth sizes.

There are three points to tackle:
- There are no vents
- it is a fantastic wind barrier
- it holds up very well over time.

In a review I wrote below, I can only add that after 7 washes, it is still very water resistant and all of the OmniHeat reflective dots are still in tact. This is true on the most abrasion-proneareas, and even on the hips and cuffs

this inseam is 31.5"

this is a very capable boot on its own. It insulates from all directions, including from beneath. The heater brings you additional heat comfort on demand for when it gets really cold. just like seat heaters, you fire them up to when you are warm enough and then shut them off.

This is the Lhotse Mountain II Parka with Omni Heat. This jacket offers a tremendous bang for just over 200 bucks.

I seriously doubt the sleeve will come up short. It is cut generously in a proportionate manner.

the fabric that creates the two hand pockets is stitched in a manner that will give you two vertical pockets on the inside. They do not have zipper closures and they will fit something like the shape size of a beer bottle...

... hmmm. wait a minute... going to test it on my wife

... and the "narrow" mention is probably due to bulky layering the gathers under the arm.

shell... 23" at the opening at the bottom, 24" across from pit to pit, and 21" from pit to hip.

insulation piece... 22" at the opening at the bottom, 23" across from pit to pit, and 21" from pit to hip.

It depends on your wingspan, but I would direct you to a medium pretty readily. If you'd prefer more arm articulation and you have long arms, that would easily move you to the larger size.

it is water resistant and windproof enough to be one! it also has great insulation for when she stops.

27.5" from the base of the collar to the shell cuff... the comfort cuff went another 2"

Large will give the room to move as well as room to breathe

the Ten Trail fleece will zip in. other insulation pieces like the Fast Trek or Kaleidoslope will attach at the cuffs and collar.

this jacket is selling well on the merits of two awesome jackets that come together to create a great parka. the shell is tough and feminine, offering great texture. It is breathable and every bit of waterproof as the ingredient membrane. the liner is the jacket that is aesthetically beautiful on its own and a failsafe insulator. the liner is old seperateley as the Kaliedoslope and it is quite water resistant. it sports the latest OmniHeat insulation and reflective detail.

in this jacket, you may forget about the wind.

tidewater is a greeny-teal. it is a great color with blue eyes!

that fit block is the same. the differences are -- at best-- negligible

There is not a tremendous amount of loft to this gament. There are down and more heavily insulated pieces that could be too puffy for an accurate and assured belting solution. To prevent too much material under the seat straps, I would suggest removing the shell element of this and go with the liner only.

this is highly water resistant. It does not have taped seams nor a waterproof membrane so it cannot be called waterproof

The short answer? Get the Lhotse. It has two exterior stuff pox, one on the chest and a few on the inside of the shell. the liner is the new OmniHeat puffy with both OH insualtion and reflective detail. The shell has a powder skirt and they both draw tight at the bottom. The Lhotse has pit zips on the shell element.

The Bugaboo has more pox on the shell and no pit zips. the lining is also Fleece with a drawcord. There is no powder skirt on the Bugaboo

You can wear them anywhere except pond's deep end. they are waterproof breathable, and 600g Thinsulate for insulation. You can plan on its success

there is no lining in this jacket. It is a fleece fabric with a polyester pocket.

it is an off white that leans toward gray, rather than the traditional yellowed offwhite. it is nearly heathered, crating this hue

it is machine washable and using down-specific detergents will help. Line drying totally and then a light tumble dry with a few tennis balls will fuff it up again

the easiest way to tell is to check the red colorway. On the outer, the black parts are a shell material and the red is fleece. inside the collar is of course fleece

The Ice Ax will join the Bugaboo system with 3-point tethering at the cuffs and top-of-back. The storm flap on the front of the Ice Ax is one of three factors preventing it from zipping it together. The guage of the zipper and the length round out the 3-some. If you want a zip in replacement, try the Ten Trail Fleece. This one will give you a fantastic softshell to wear on its own

this has a gerous cut when it comes to length. I guess is does depend how much of the 6'3" is torso, but the XXL should fit well and be plenty long

this is not the zip in replacement. It will however attach at both cuffs and the top of the back. This will be a great replacement liner

The Utilizer or Silver Ridge would work better for freedom of movement.

this offers great water and wind resistance. it is cut for everyday use and may not be as snug to the body as you may want for a vigorous showshoe. It may not pack up as small as some other hiking jkts, but it will be good for colder days you're not onthe trail too.

nordic skiing? absolutely.
Alpine Skiing? it will do, but it isn't as low-profile and close to the body as the Columbia Stryker or Ranger. shape and structure would necessitate that you remove the pack for lift chair seating

not every color was offered in extended sizing, and WW/OJ was not made in that size group

these will stand up to use as well as abuse. the articulation of a tele skier will benefit from the cut and fabric mobility of this garment. this is insulated slightly, making it easier to up-size and not create too much space to warm. that will also extend the wear time before the next growth spurt

I just answered this on the ThermoDynamic side too....

Do you want insulation? If yes, this one is it and willtake you well below 10F degrees.

Are pit zips important to you? If yes, this one is for you.

this does not have the insulation the Heat Elite has. this is only Omni Heat reflective (the dots) and geared to compliment the offering. I personally shose this for hte cleaner lines and lack of bulk. I did not choose this for a layering piece, I will have you know. with a base layer and a LS Tshirt, I was fine with this jkt in 15F for a football game last year. sitting still and slugging beers is no way to generate heat. I was fine

It insulates better than the classics and regulates better than anythign to date. It is closest to a light 650ish fill, with teh ability to fly solo and combat the wind and elements. With its capabilities to combat the cold, I would put it up against any heavier fill down.

there are small loops under the forearms of the liner. inside the shell sleeves, there are tabs with a snap on them. the tabs tether the loop and snap into place. At the top of the neck of the liner, there is another loop. it tethers similarly to the shell.

It is also refered to as the 3-point Interchange. That should help

I left my house today in 25 degrees, light snow, a polo shirt and this jacket. I will be in temps as high as 45F and low as -5F by midnight tonight. this jacket offers warmth and temperature management like no other feature set from the other guys. It has a distinct advantage over the others... not just and edge.

as for the water resistance, this jacket is quiet, unlike many membrane softshells. It has yet to wet out on me and I am in the 14th month of using it. As I mention in the review, it is my daily driver ESPECIALLY on travel days

it is cut with a bit of extra room. If you are between sizes i would still take the smaller size, even if you plan 2-3 layers beneath it.

IF you want the lining to zip into the shell, the replacement piece you are looking for is the Ten Trails Fleece. Otherwise, the 3-point interchange system will allow a the Heat Elite, Fast Trek and more to tack in.

If you're properly layered, this will be a great, soft, comfy, versatile outer for you. It is a cotton blend shell that is more waterproof and stain resistant than most rain jackets people buy in major cities. the insulation will do a great job combatting th lower temps.

these have a 32" inseam... What is Tall Dude's inseam? I would imagine at least a 34".

caution!

the fabric is waterproof by normal measurements and treated with OmniShield-- a proprietary DWR-- on the outside. The seams are not taped, making it not a waterproof garment altogether. This jacket will warm up more quickly and regulate temperature well, and pair that with dual pit zips and you get a versatile arobic jacket that will work standing still and in motion. if you run/xc ski/snowshoe in the cold, this will be a great jkt for you

this is a fleece jacket best suited for warmth and not water repellancy... there is no membrane and no waterproofing.

you do see the Columbia Navy colorway is up there now, yes?

it is quite wind resistant and water resistant. the liner does not have a membrane but hte tight weave and DWR treatment will make it a capable jacket on its own

this is the same MTR fleece that the Benton has been using for a number of seasons. It can be a very warm jacket. I don't know about the price differences

there are princess seams on both front and back. even in black from 30 feet you can identify it as a women's piece

This is an softshell with no insulation. it does have som eroom for layering in the colder temps.

i can measure a medium if you wish, and for now I can give you a frame of reference...

the garment is built to wear alone or as a layer. the sleeeves are built ever so slightly long and also have a comfort cuff for extra hold. For a family with an ape index that begs for longer sleeves, each of my girls has at least one of these in the rotation each season

This is a great jacket thrown on as a townie. It has a wool blend and is treated to repel precip and still keep a soft feel. It is pretty slim and not puffy for a great silhouette. The lining material is a soft, satin-y finish and will slide easily over layering for the coldest days.

As for size, you are on the fence. I think you can easily go with an XS or S, with the primary deciding factor being how you want it to sit on you. We put the medium on a 5'7" 115lb girl in the office and it looked great.

it is a matte, ripstop material that is more firm than many puffy coats out there. t does not come with a stiff sack and it packs reasonably small (something closer to a football than a rugby ball). It was designed as an outer piece and the OmniShield makes it quite water resistant. I used it for skiing with the kids (low arobic) in some pretty wet snow. the DWR is applied to the fiber and not the fabric, making it more resistant and supple, and adding durability and longevity. There is not a membrane used onthis to waterproof it.

it is machine washable and recommended to line dry. washing it will help it work better at breathing and water resistance. the waterproof/breathable membrane will always remain waterproof

this is a great jacket that will offer you more than those other jackets at $250 an up. First of all, this is a component jacket. the liner can be worn alone, and it touts OmniShield water repelancy, OmniHeat Reflective lining, and Omni Heat insulation. The OmniHeat story is that of the most efficient insualtion and temperature management available. The shell uses OmniTech-- one of the most breathable, waterproof membranes out there-- and that will blow the doors off the industry dinosaur. The shell can be used as an uninsulated, waterproof shell, or zip it all together for a globe-trotting outer garment that is unparalleled.

The short version:
-Snuggly Bunny is the warmest piece out there for the little ones
-Bugababy Interchange is the most versatile, waterproof/breathable suit

Long version:
The Bugababy Interchange is a 3-in-1 item. It is made up of a fleece piece that can be worn by itself, a waterproof/breathable shell that can be worn by itself, or zipped together to create a fleece-lined shell. The versatility of this oneis unmatched.
The Snuggly Bunny is a down filled piece that is much like a sleeping bag with sleeves. its warmth is superior to all the others and it is still quite water resistant

Oh boy! I like working with somebody that has done their homework AND knows what they want! All of the colors i see today on the menu are the new, updated silhouettes that you are looking for. The shape is much improved.

This jacket would be a fantastic light to intermediate jacket fo rthe bite of the coldest days of Ontario winters. It has a moderate amount of insulation and still may come up short on the coldest, most humid days.
As for the sizing question, i woudl defer to the gear gurus. they are far better at the conversions than I am.

This jacket has a wool/acrylic blend for an outer. It is closer to a sweater than to a ski coat. It has a satin-y liner all throughout and into the hood. Laundering is a gentle wash and line dry.

How old is the shell? 3-4 years ago, Columbia upgraded the zippers and changed compatibility. If it is newer than that, this will in fact zip in.

to get you a clear answer, I have to argue semantics, trying to not sound like a jerk. This will not zip into or onto a fleece or down insulator. A different shell that will allow a fleece or down piece to zip in would include the Backcountry Bandit shell

this jacket does not have a zip in capability for a 3 in 1. I am trying to recall if it has the 3 point system to anchor it in the neck and cuff, and I am 95% sure that it's a no. The Backcountry Bandit comes with all the perks and a lifetime warranty. Admittedly, I think it is still worth a call to the consumer line to check on your current jacket. the no-response from them tells me they didn't get the message.

This is a tough one. It will be a great fit under that shell. the fleece runs a little closer to the body and will stay out of the way of your shell. This will not have the tabs to anchor it on the neckline and cuffs, nor will it zip in.

this jacket is not form fitting and it offers a reasonably generous allowance for curves and shape. I would still suggest a medium

This jacket is made up to a 3X, and its abscence form the drop down tells me they're sold out

It is 25" downthe back, from the bottom of the collar to the bottom of the hem. that usually lands just above the hips

and, yes... I represent Columbia. I don't know if that pops up readily.

The Shimmer Me Timbers boasts the best heat regulation and insulation available this year. The insulation is OmniHeat-- Polyester with 50% being recycled. Ounce for ounce it is the most effective insulator out there. This also has OmniHeat Reflecive lining close to the body. It reflects and regulates heat and makes the jacket 20% warmer than the others you mentioned. it can be layered with and is quite water resistant with OmniShield as outer treatment.

the first item you ask for comparison offers asimilar "green" insulation, but not hte same capabilities nor OmniHeat reflective lining. The second is also a great piece with P1 insulation, and OmniHeat Insulation will beat it handily with heat retention and regulation at a fraaction of the cost.

you have a good eye. The pocket does hav ea long zipper for depth, and it can be too big for just a hand and wrist going in. I will say that the pocket is not mesh and it will not vent body heat, and the jacket is otherwise quite warm and versatile.

this will be a great insulation piece for temperatures as cold as that, with proper layering of course. I hav ea number of people outfitting their little ones for temperatures colder than that.

with proper layering, it can be just as warm as some down-filled jackets/pants. apparel cannot be temperature rated like footwear or sleeping bags due to the articulation of the item, among other reasons.

It is barely on the generous side of the sizing scale. It was built to stretch and not reveal or restrict.

it is a discontinued style. It was upgraded with a better membrane and fit, then changed to the Storm Surge

1. limited to the lifespan of a normal garment. In this case kiddo warmwear can be passed on and on. There is a reasonable limit of time set to it. Usually about 4 model years.

2. this is a very good and warm suit. If they will be in the snow-- read as "playing, digging and forcing water at the seams"-- then a rougher, tumbler suit will offer a better barrier. Look at the Dobby for instance

going into the Toddler sizing would get you a 3T if you are set on that size. a 4/5 will get you more time before your child will outgrow it. My little one doesn't use it for layering, so we did pop up a size and rolled the cuff back

the fabric is waterproof, however the seams are not taped. This kept the price much lower and it will offer a way for water to be forced inbto the garment. With that being said, it is still plenty of protection for little ones and just how long most of them can handle being in the snow

This will fit into the Whirlibird and anchor at the cuffs and back of neck with no problem. The zippers will most likely not zip in perfectly. The length of the zipper is one factor as is which zipper was used for the Whirlibird.

unhelpful? hmmm from the bottom of the collar, to the bottom of the hem, this is 26.5" in length. It is not calssifiable as long OR a short cut jacket

this jacket is built to allow a light to medium layering in the shoulders, elbows and waist. It is not a slim cut. I would suggest going with your true size

32" is what the specs say

that's a great callout. The Intense Red colorway is far more vibrant than the detailed view picture of the back. the detailed view photo on the bottom is a picture of an older colorway that is not part of the Fall 10 color offering

that would indicate a size 8 waist and a 30" inseam

This is a new model with OmniHeat. The reviewer is a bc.com employee that got a test piece last year.

This is seam-sealed, and 10,000mm waterproof. That's resistant to 10m of direct water pressure! OmniTech is arguably one of the most breathable membranes available, and this also touts the latest in heat management -- OmniHeat. Having access to the entire lineup, a single choice for a jacket that has components to cover 3 season's worth of conditions would certainly be the Lhotse Mountain.

size dimensions? for what size? the center back length of a 12 mo. size is 10.25. that should be a good scale to extrapolate by.

I have requested the specs for M and L ounce fills and expect an answer shortly. I can tell you now that the linig reflects enough heat to regulate and keep you warmer with less effort. The lining fabric creates a 20% warmer garment

this fit offers some freedom of movement and is subsequently generous. for layering, you may want to drop a size. the pockets are not zippered

this is my choice for my little boy in the snow. with the right layering it can go warmer or bitter cold. this is our snowshoe/igloo/snowman catchall piece. the suspendered bottoms make it stay in place and creates a single environment to manage temperature

easy answer - these are not a heavy weight fleece.
more colorful answer - they are a heavier lightweight fleece

it is built as an insulating layer with a bit of DWR as a moisture barrier. by itself, it may be a bit thin on colder days. it will be great with a shell for skiing and on its own apres.

it does have extra length in the front and back with a cut up on the sides for a little mobility. If you get her a small or medium, the lenght should not play a role. In sizes larger than that, length may come into play.

apparel is unlike footwear and sleeping bags in temperature ratings. Articulation and many other factors prevent that standardization. I can tell you that with proper layering and coverage of the extremities, this suit can combat the bite of the cold and humidity very well. It will create a single environment (rather than the 2 that a jacket/pant combo will create)that will allow heat interchange from top to bottom.

the video is a bit dark and the picture is a bit light... The color is closest to the picture.

I think the insulation ad length will wok as a great, comfortable, warm blanket with functionality to move and take on the biting cold and a light drizzle or snow.

The short answer - with the right layering, this can do just about anything!

This model does offer great stretch to fit as they grow. To give a blanket answer to your question, I am reluctant. There are so many sizes and shapes to heads out there. my only fear is that it may be a bit big at first if the 3 YO is small. I hope this helps

this will work best for lake and ocean. In my river paddling days, I was a swimmer more times than I should have been. This will not be a dry top for those circumstances when you flip, considering the neoprene cuffs and collar are for comfort. For rain, splashing waves and splashing water, it will keep you dry and comfy with its breathable waterproof membrane.

Mike's link is for an '09 model, with the fleece liner and no OmniHeat. There is a huge difference in technology with that model and this one. A jump in price like is --what I would bet to be-- a pricing error caught and corrected

This is the latest model. This has OmniHeat lining and insulation on the inner component, Omni shield on the outside of the inner piece, and Omni Tech (breathable waterproof) in the outer shell. It is every bit as waterproof as other WB membranes and OmniTech will breath better than the biggest names and products of other companies.

This is a lot of jacket for not a lot of money at all.

Absolutely! this will keep you warm and will regulate temperature better than anything else out there. This is a better length than it's sibling, the Geocache, for what you intend to use it as. the outer fabric is treated with OmniShield, a super durable and effective DWR treatment for light snow and even misting rain.

It will be a great jacket for your intended usage.

The inseam lengths are as folloews:
Short is 30"
Regular is 32"
Long is 34"

the zipper is not the same size/length of the shells. This one will not zip in

It was Fall 09 and prior models that had fleece liners. this one touts the latest OmniHeat technology and a much more appealing liner for stand-alone usage.