same shell material, and same laminate, but the two layer does not need the internal bonded layer, and so makes the material feel lighter

you can wash them, but i would not advise washing them a bunch of times.

the poly fill will hold up. hang dry

depending on the Ape factor, i would lean to XL. check the more detailed fit dimensions on the size chart, height is not enough data to say for sure. See Size? just under the select options bar....

bombshell bib is heavier face fabric for more durability. the three layer materials are heavier because of the internal layer. the bombshell insulated is only two layer - outside shell and membrane.

this jacket is warmer and more breathable. if you are looking for the powershield performance - which is a laminate and perhaps a little less bulk, check out the stoic welder lo.

great idea! to keep weight and bulk down on bombshells we do not add the extra zipper, but is a great feature for future!

medium should do well.. collar to inseam measure is about 33 inches on garment

height and weight is not quite enough to judge size... try using the size tab, just under the 'select options' this give you better specific dimensions for waist, and inseam. these measures will result in an athletic fit, if you want loose, go up a size.

it is not 100% windproof, as it has some air permeability features. about 95% windproof, with the remaining allowing some air exchange about 6-10 cfm. this allows the jacket to breathe when exerting in the mountains - hiking for side country gates, touring up alpine, or climbing. the TNF apex summit uses WINDBLOC - windproof, but poor breathability - means you can get wet with exertion

this is fitted, and will work well to keep you warm with a merino layer, or synthetic layer.

will work great, but you may want go up a size. the cuffs keep the arm openings where you need it, and easier to get on over other layers.

there is no bulk with this Hadron. the whole thing will stuff into a sandwich bag!
the hood will fill the space that is left, without pressure.

unlike wearing a fleece, or cotton hoodie.

if you like the older goat merino styles from 2009, you will love the 200 weight from stoic. the 200 grams per square meter is heavier, more dense and uses 18.9 micron merino, which results in warmer and a more structured material. this 150 gsm is light, and uses a soft 17.5 merino, personally my favorite for its great feel, and just enough warmth.

your bombshell will not leak. the welded seams are more reliable than sewn, and seamtaped. this colorway is tonal but uses the same patterns as those with a highlight seam.

the sic0126 uses a different quilting pattern for 2011, and some color changes - otherwise same size and materials.

check the sizing chart. height and weight is not as important as waist size, and inseam size. find size chart just under 'select options'.

all the stoic logo are a silver reflective, very bright reflective too.

the tour pant is good thick material. i used in March on haute route, and used every day, and they were great - but that is a lot of touring, skinning, and climbing, and then some skiing. if inbounds skiing on cold days, a layer inside is good, or a ski pant over is good.

i think the detail image of the color and stoic logo is the most accurate. a bit darker than the front shot of GRAZE. other stoic styles use this graze also.

XL anorak is .95 lbs. this is a heavier layer, that is great on its own, or as a great layering piece in cold weather.

the welder lo softshell has a fleece lining so it is warm, but the powershield material does allow air to permeate (93% windproof). if you are skiing inbounds, then you generate less heat than hiking or touring, and may need a layer under, or a layer over.

this glove will keep you warm and has great dexterity,and with good circulation, and good level of activity can keep you warm. but it is not the warmest glove or mitten out there. for extreme cold, sedentary conditions like sitting on slow chair lift, the welder trigger mitt gives good dexterity while still being very warm, or mittens are a the best go to.

height and weight is not enough.... check your body dimensions against the chart for size and fit... just below the 'select options' in the gray box. this helps you define what a standard fit is. if you want looser for fashion, or you plan growing, go up a size.

you can use indoors, but keep ventilation as CO is an output of the propane being burned

the SE pant, special edition, is the schoeller version of the tour pant. same pant and cut, just using the schoeller materials... great you guys like the goat!

see stoic overhang short

the water resistance is good for light and fast conditions - the jacket is light, and when it starts raining its time to run to the car fast! the material does not use a coating, so the breathability is great. the DWR finish we use will repel water, but intended only for the short interval during aerobic activities that keep you warm. If in constant wet weather, a vaporshell jacket would be more suitable.

This material has great breathability, and even a small amount of air permeability approx 4-7 cfm. because this lightweight fabric does not have any coatings, it will breath better than most lightweight shells. we rely on the tight weave and DWR for it weather proofness, but still maintains the ability to breathe and self regulate for comfort.

because material prices have increased, and labor wages have increased. and the US dollar has decreased

The CFM rating is approx 4-7 cfm of air permeability. being a waterproof jacket, this unique quality allows a small amount of air to pass through the membrane, and more importantly, allows the moisture rich air inside the jacket to pass out of the jacket. a Gore-tex jacket has 0 cfm rating, but also performs much less in breathability.

2 oz of down, 850 fill power = very low weight, very packable, and great insulation

there is the purple, the green graze, and a gray excalibur if you want garish we have garish, if you want to blend in with the locals you can do that too...

yes the vintage is the same color in the other hadron styles - much better than the green in my opinion

very different shorts! lighter weight material, welded construction, only the two front pockets, and cinch instead of belt buckles. different cut as well.

we would like to see this delamination... please contact customer service, and they will provide you with a new one, and we would like you send this one back.

thanks for your testing....

183 grams for a XL, or 6 .4 oz.

damn light...

similar to the shift...

improved upon the shift by being welded instead of sewn, and monolith softshell is more durable than the powershield.

the microlith pant is lighter than the overhang. about 20% lighter due to lighter material, and no front or rear pockets. welded thigh pocket, and a built in web belt.

there is one in stock, but that is it for the season

this is it for the season...

no more crews coming in! check out the merino bliss - same great material, but with a little collar, 1/4 zip, and a small pocket.

black black in medium is available in the merino bliss!

http://www.backcountry.com/stoic-merino-bliss-shirt-long-sleeve-mens

bliss has a small collar, 1/4 zip, and small pocket great for phone or ipod under all the layers.

no more black black in medium in for the season

north dakota is cold and windy, but we have colder temps and wind in the wasatch mountains. it is completely windproof.
it is not however not insulated. you may want to look at the stoic bombshell insulated for something warmer, it depends on what you are doing while wearing the jacket, how aerobic activity is, this makes a big difference.

check the sizing chart. this describes a body that it will fit, regardless if its a man or woman.

no more green twill for the season... got to act fast!

this is a fleece lining bonded to the nylon woven softshell material. NO static!

check back with us for a new and improved rime - called the Microlith pullover. it is still a pullover softshell, but now Welded!

more for less. the apex bionic material is a laminate with less breathability, and less weather resistance. this monolith with the welded seams is great at shedding weather. and at a better price!

They have a heavy merino liner in them, and a small amount of primaloft in the back of the hand. They are pretty warm, but pretty dextrous too, so that is always a tradeoff...
We backcountry ski in the wasatch, and air temps can be zero, and blowing, hands are still great. but sitting on a lift for a long time, or being pretty still, your hands get cold.

this year, the merino wool is thick, and makes the glove feel a little tight out of the bag. size up if you are concerned, and wear them a day to help pack in the liner.

Luft hoody insulated sweater has the hood... sorry no down sweaters with hoods

it is a three layer shell. This type of jacket cuts wind great, and keeps you dry, and allows body perspiration to escape (again the focus is to keep you dry inside). there is room for layering insulation under the jacket...
if you want an insulated one, check out the bombshell insulated, and welder insulated from STOIC

they are a large #10 waterproof zipper that is pretty smooth. they are a little stiff because of the waterproofness, but i would not say snaggy..

here are some sizes for you...

large is approx 15x15x28 inches

XL is 17x17x36 inches

the bag is made of a PU coated nylon material, and welded at the seams. this construction if waterproof, and the material will not soak up water. the zipper is a pu coated zipper, however the one spot that may let water in, is where the two zipper heads come together. i have used this duffel a lot for weekend camping trips and store in the back of my open pick up. i put the zipper side down when raining to keep contents dry.

44 inches talon... like the specs say in upper corner...

gray goose down, 800 fill power. goose is the only 800 fill. duck can only be about 700 fill power.

these new merino shirts are made of a better merino wool. 17.5 micron which is softer. quality is great. durability may not be better, but the softness and feel of the merino is better. for more durability and off width climbing, try the Breathe tech tee, a more durable polyester yarn.

yes there are some new larger pots in we are looking at, as you have suggested the 1000 ML is a great size... thanks for suggestion

these are the same pant design, different material. the new material is a little heavier, but will breathe well and hold up to a summer full of trail time, climbing, or adventures.

they have a great DWR on them, so backcountry skiing is great. in bounds, they may breathe too well!
great for hiking, climbing, and backpacking, and adventure travel...

new colors coming in F10

similar cut to the merino crew of the goat years. yes this yellow is a bit off, i think your color vision is good. Our photograph editor, perhaps not so much! the true color is a citron.

your height and weight would suggest a medium for athletic fit, with room for a little under (you will not need much under to be warm) a large if you want a baggier more roomy fit, but arms will fell long.

but to be sure, check the Sizing chart, for chest and waist measures. these softshell jackets are true to size, and measuring chart will describe an athletic fitted jacket.

this glove does have primaloft, but only on the back of the hand. see photo of one of the welders cut so that you can see the cross section. the palm has only the wool lining, which allows better grip.

In other Primaloft gloves, lining and shell is very slippery feeling, because of the primaloft between the palm lining, and the palm leather.

they would work well with ice.

the wool lining gives a great grip and friction from hand, to shell, to ice tool or ski pole. there is no primaloft on the palm side, only on the back of the hand, and this allows better dexterity, and better grip.

the gauntlet will also work well, to be worn outside of the jacket layer.

and they are helmet compatible

wash instruction state.... Wash me often for best performance. a common misperception out there is to not wash technical jackets, but washing jackets, helps to revive the DWR treatment.

wash with Nikwax techwash, or if another country a delicate wash (no surfactants). DWR treatment may be needed after a few washes, use a spray on nikwax softshell proofing. this will make the surface bead up water, and breath better.

if you want more insulation, the welder hi loft would be awesome. this jacket has a low loft fleece layer inside for insulation, but it is intended for being active and breathing well to keep your temp regulated.

mens style is the Stoic bombshell bib, Paige brady stoic athlete rocks the mens pant....

sm/med is 6-9 and large/XL is 9-12

give them a hot wash, or a little dryer time to shrink them up if needed.

only describing the face fabric. the 480 is heavier, tougher, and stiffer. the 320 is lighter, less stiff (but still crinkly and noisy), and less durable.

in practical use, if the end use is skiing trees, ice climbing, or alpine climbing the heavier fabric is better to take the use, and abuse of abrasion, snagging, and tree impact.

if the end use is more touring, used as wet weather only and a softshell is primary shell, hiking, backpacking, the lighter weight material, better packability, is more appropriate

as others suggest in the reviews, goretex does not actually breathe that well. it is waterproof, but event is far more breathable. event actually allows air to pass through, air permeable. other water proof breathable laminates are not air permeable, or compare in moisture vapor transfer rate (MVTR)

event breathes extremely well, better than goretex. Event material can actually allow air to pass through, air permeable, while goretex and other waterproof breathable laminates are not air permeable.

stoic welder is available, the event shell is not intended to replace the softshell welder.

height and weight is not a good measure, check our chest, waist, hip measures and check the size chart. this style is more fitted than north face, and REI, but may be the same size, just fit better!

no pit zips needed due to the great performance of the materials. it breathes well, you can actually feel Air pass through it, helping the material to remove moisture.

if medium is your fit, the best option would be the stoic welder for womens... this style is not welded instead of sewn, and available in medium.

what kind of climbing? yeah they are on the heavy thick side, they are called Bombshell bibs!

would work great for alpine snow and ice, winter ascents. not the right pant for extreme overhang ice climbing or rock.

the buyers have the best crystal balls we can find! they had to trade out the '8 ball' for something better this year, but its still a tough thing to forecast. try a large? mediums are out for the season.