ha.. yes we need a curley video.....

The materials performance is related to the washing.... Wash often. Bacon grease from breakfast, sunscreen from morning, cheese from lunch, and sweaty palms from evening climb all make the DWR wear out.

Wash cold to warm water, use a nikwax tech wash, or a mild soap. avoid normal laundry detergent, it has surfactants (the opposite of DWR).

After a summer of washes and wears, for best performance, spray on a DWR. Nikwax softshell, or a TX direct. dry a bit on medium heat and it will evenly coat the outside, and make a Big improvement in maintaining DWR.

The key to a softshell working as a shell, is a strong water repellancy on the surface.

UPF 50 ratings on the shirts that are color, and a UPF 30 on the White.

Very light, but very tightly knitted.

Fitted would be a large, but you need to check arm length, and compare to size chart.

An XL would be good for layering under, and having plenty of arm length.

Stuff the coat into the kangaroo pocket, and the kangaroo pocket with turn inside out, with the entire jacket on the inside. the inside material of the kangaroo pocket is now showing, but its the sample body fabric. the best pillow....

the 150 is also made of very fine 17.5 micron merino wool - very soft and comfortable, and lightweight. the 200 gram per square meter uses 18.9 merino wool, more insulation and more durable wool.

A patch of material is good, and then use a seam grip, or aquaseal, or a Polyurethane glue. apply the glue to the patch and apply to the hole. then add a piece of wax paper and lay a large book or dictionary on top to keep it flat. wait over night and you have a patch that is well bonded and waterproof. The goretex patches, and other patches with a self adhesive on one side i have tried to do not stay on.

burnt orange jacket with the redrock zippers are live....

same shell material, and same laminate, but the two layer does not need the internal bonded layer, and so makes the material feel lighter

you can wash them, but i would not advise washing them a bunch of times.

the poly fill will hold up. hang dry

depending on the Ape factor, i would lean to XL. check the more detailed fit dimensions on the size chart, height is not enough data to say for sure. See Size? just under the select options bar....

bombshell bib is heavier face fabric for more durability. the three layer materials are heavier because of the internal layer. the bombshell insulated is only two layer - outside shell and membrane.

this jacket is warmer and more breathable. if you are looking for the powershield performance - which is a laminate and perhaps a little less bulk, check out the stoic welder lo.

great idea! to keep weight and bulk down on bombshells we do not add the extra zipper, but is a great feature for future!

medium should do well.. collar to inseam measure is about 33 inches on garment

height and weight is not quite enough to judge size... try using the size tab, just under the 'select options' this give you better specific dimensions for waist, and inseam. these measures will result in an athletic fit, if you want loose, go up a size.

it is not 100% windproof, as it has some air permeability features. about 95% windproof, with the remaining allowing some air exchange about 6-10 cfm. this allows the jacket to breathe when exerting in the mountains - hiking for side country gates, touring up alpine, or climbing. the TNF apex summit uses WINDBLOC - windproof, but poor breathability - means you can get wet with exertion

this is fitted, and will work well to keep you warm with a merino layer, or synthetic layer.

will work great, but you may want go up a size. the cuffs keep the arm openings where you need it, and easier to get on over other layers.

there is no bulk with this Hadron. the whole thing will stuff into a sandwich bag!
the hood will fill the space that is left, without pressure.

unlike wearing a fleece, or cotton hoodie.

if you like the older goat merino styles from 2009, you will love the 200 weight from stoic. the 200 grams per square meter is heavier, more dense and uses 18.9 micron merino, which results in warmer and a more structured material. this 150 gsm is light, and uses a soft 17.5 merino, personally my favorite for its great feel, and just enough warmth.

your bombshell will not leak. the welded seams are more reliable than sewn, and seamtaped. this colorway is tonal but uses the same patterns as those with a highlight seam.

the sic0126 uses a different quilting pattern for 2011, and some color changes - otherwise same size and materials.

check the sizing chart. height and weight is not as important as waist size, and inseam size. find size chart just under 'select options'.

all the stoic logo are a silver reflective, very bright reflective too.

the tour pant is good thick material. i used in March on haute route, and used every day, and they were great - but that is a lot of touring, skinning, and climbing, and then some skiing. if inbounds skiing on cold days, a layer inside is good, or a ski pant over is good.

i think the detail image of the color and stoic logo is the most accurate. a bit darker than the front shot of GRAZE. other stoic styles use this graze also.

XL anorak is .95 lbs. this is a heavier layer, that is great on its own, or as a great layering piece in cold weather.

the welder lo softshell has a fleece lining so it is warm, but the powershield material does allow air to permeate (93% windproof). if you are skiing inbounds, then you generate less heat than hiking or touring, and may need a layer under, or a layer over.

this glove will keep you warm and has great dexterity,and with good circulation, and good level of activity can keep you warm. but it is not the warmest glove or mitten out there. for extreme cold, sedentary conditions like sitting on slow chair lift, the welder trigger mitt gives good dexterity while still being very warm, or mittens are a the best go to.

height and weight is not enough.... check your body dimensions against the chart for size and fit... just below the 'select options' in the gray box. this helps you define what a standard fit is. if you want looser for fashion, or you plan growing, go up a size.

you can use indoors, but keep ventilation as CO is an output of the propane being burned

the SE pant, special edition, is the schoeller version of the tour pant. same pant and cut, just using the schoeller materials... great you guys like the goat!

see stoic overhang short

the water resistance is good for light and fast conditions - the jacket is light, and when it starts raining its time to run to the car fast! the material does not use a coating, so the breathability is great. the DWR finish we use will repel water, but intended only for the short interval during aerobic activities that keep you warm. If in constant wet weather, a vaporshell jacket would be more suitable.

This material has great breathability, and even a small amount of air permeability approx 4-7 cfm. because this lightweight fabric does not have any coatings, it will breath better than most lightweight shells. we rely on the tight weave and DWR for it weather proofness, but still maintains the ability to breathe and self regulate for comfort.

because material prices have increased, and labor wages have increased. and the US dollar has decreased

The CFM rating is approx 4-7 cfm of air permeability. being a waterproof jacket, this unique quality allows a small amount of air to pass through the membrane, and more importantly, allows the moisture rich air inside the jacket to pass out of the jacket. a Gore-tex jacket has 0 cfm rating, but also performs much less in breathability.

2 oz of down, 850 fill power = very low weight, very packable, and great insulation

there is the purple, the green graze, and a gray excalibur if you want garish we have garish, if you want to blend in with the locals you can do that too...

yes the vintage is the same color in the other hadron styles - much better than the green in my opinion

very different shorts! lighter weight material, welded construction, only the two front pockets, and cinch instead of belt buckles. different cut as well.

we would like to see this delamination... please contact customer service, and they will provide you with a new one, and we would like you send this one back.

thanks for your testing....

183 grams for a XL, or 6 .4 oz.

damn light...

similar to the shift...

improved upon the shift by being welded instead of sewn, and monolith softshell is more durable than the powershield.

the microlith pant is lighter than the overhang. about 20% lighter due to lighter material, and no front or rear pockets. welded thigh pocket, and a built in web belt.

there is one in stock, but that is it for the season

this is it for the season...

no more crews coming in! check out the merino bliss - same great material, but with a little collar, 1/4 zip, and a small pocket.

black black in medium is available in the merino bliss!

http://www.backcountry.com/stoic-merino-bliss-shirt-long-sleeve-mens

bliss has a small collar, 1/4 zip, and small pocket great for phone or ipod under all the layers.

no more black black in medium in for the season

north dakota is cold and windy, but we have colder temps and wind in the wasatch mountains. it is completely windproof.
it is not however not insulated. you may want to look at the stoic bombshell insulated for something warmer, it depends on what you are doing while wearing the jacket, how aerobic activity is, this makes a big difference.

check the sizing chart. this describes a body that it will fit, regardless if its a man or woman.

no more green twill for the season... got to act fast!

this is a fleece lining bonded to the nylon woven softshell material. NO static!

check back with us for a new and improved rime - called the Microlith pullover. it is still a pullover softshell, but now Welded!

more for less. the apex bionic material is a laminate with less breathability, and less weather resistance. this monolith with the welded seams is great at shedding weather. and at a better price!

They have a heavy merino liner in them, and a small amount of primaloft in the back of the hand. They are pretty warm, but pretty dextrous too, so that is always a tradeoff...
We backcountry ski in the wasatch, and air temps can be zero, and blowing, hands are still great. but sitting on a lift for a long time, or being pretty still, your hands get cold.

this year, the merino wool is thick, and makes the glove feel a little tight out of the bag. size up if you are concerned, and wear them a day to help pack in the liner.

Luft hoody insulated sweater has the hood... sorry no down sweaters with hoods

it is a three layer shell. This type of jacket cuts wind great, and keeps you dry, and allows body perspiration to escape (again the focus is to keep you dry inside). there is room for layering insulation under the jacket...
if you want an insulated one, check out the bombshell insulated, and welder insulated from STOIC

they are a large #10 waterproof zipper that is pretty smooth. they are a little stiff because of the waterproofness, but i would not say snaggy..

here are some sizes for you...

large is approx 15x15x28 inches

XL is 17x17x36 inches

the bag is made of a PU coated nylon material, and welded at the seams. this construction if waterproof, and the material will not soak up water. the zipper is a pu coated zipper, however the one spot that may let water in, is where the two zipper heads come together. i have used this duffel a lot for weekend camping trips and store in the back of my open pick up. i put the zipper side down when raining to keep contents dry.

44 inches talon... like the specs say in upper corner...

gray goose down, 800 fill power. goose is the only 800 fill. duck can only be about 700 fill power.

these new merino shirts are made of a better merino wool. 17.5 micron which is softer. quality is great. durability may not be better, but the softness and feel of the merino is better. for more durability and off width climbing, try the Breathe tech tee, a more durable polyester yarn.

yes there are some new larger pots in we are looking at, as you have suggested the 1000 ML is a great size... thanks for suggestion

these are the same pant design, different material. the new material is a little heavier, but will breathe well and hold up to a summer full of trail time, climbing, or adventures.

they have a great DWR on them, so backcountry skiing is great. in bounds, they may breathe too well!
great for hiking, climbing, and backpacking, and adventure travel...

new colors coming in F10

similar cut to the merino crew of the goat years. yes this yellow is a bit off, i think your color vision is good. Our photograph editor, perhaps not so much! the true color is a citron.

your height and weight would suggest a medium for athletic fit, with room for a little under (you will not need much under to be warm) a large if you want a baggier more roomy fit, but arms will fell long.

but to be sure, check the Sizing chart, for chest and waist measures. these softshell jackets are true to size, and measuring chart will describe an athletic fitted jacket.

this glove does have primaloft, but only on the back of the hand. see photo of one of the welders cut so that you can see the cross section. the palm has only the wool lining, which allows better grip.

In other Primaloft gloves, lining and shell is very slippery feeling, because of the primaloft between the palm lining, and the palm leather.

they would work well with ice.

the wool lining gives a great grip and friction from hand, to shell, to ice tool or ski pole. there is no primaloft on the palm side, only on the back of the hand, and this allows better dexterity, and better grip.

the gauntlet will also work well, to be worn outside of the jacket layer.

and they are helmet compatible

wash instruction state.... Wash me often for best performance. a common misperception out there is to not wash technical jackets, but washing jackets, helps to revive the DWR treatment.

wash with Nikwax techwash, or if another country a delicate wash (no surfactants). DWR treatment may be needed after a few washes, use a spray on nikwax softshell proofing. this will make the surface bead up water, and breath better.

if you want more insulation, the welder hi loft would be awesome. this jacket has a low loft fleece layer inside for insulation, but it is intended for being active and breathing well to keep your temp regulated.

mens style is the Stoic bombshell bib, Paige brady stoic athlete rocks the mens pant....

sm/med is 6-9 and large/XL is 9-12

give them a hot wash, or a little dryer time to shrink them up if needed.

only describing the face fabric. the 480 is heavier, tougher, and stiffer. the 320 is lighter, less stiff (but still crinkly and noisy), and less durable.

in practical use, if the end use is skiing trees, ice climbing, or alpine climbing the heavier fabric is better to take the use, and abuse of abrasion, snagging, and tree impact.

if the end use is more touring, used as wet weather only and a softshell is primary shell, hiking, backpacking, the lighter weight material, better packability, is more appropriate

as others suggest in the reviews, goretex does not actually breathe that well. it is waterproof, but event is far more breathable. event actually allows air to pass through, air permeable. other water proof breathable laminates are not air permeable, or compare in moisture vapor transfer rate (MVTR)

event breathes extremely well, better than goretex. Event material can actually allow air to pass through, air permeable, while goretex and other waterproof breathable laminates are not air permeable.

stoic welder is available, the event shell is not intended to replace the softshell welder.

height and weight is not a good measure, check our chest, waist, hip measures and check the size chart. this style is more fitted than north face, and REI, but may be the same size, just fit better!

no pit zips needed due to the great performance of the materials. it breathes well, you can actually feel Air pass through it, helping the material to remove moisture.

if medium is your fit, the best option would be the stoic welder for womens... this style is not welded instead of sewn, and available in medium.

what kind of climbing? yeah they are on the heavy thick side, they are called Bombshell bibs!

would work great for alpine snow and ice, winter ascents. not the right pant for extreme overhang ice climbing or rock.

the buyers have the best crystal balls we can find! they had to trade out the '8 ball' for something better this year, but its still a tough thing to forecast. try a large? mediums are out for the season.

a great vote for more womens styles! i hope there are more women like you out there. there were similar requests last year, for a welder softshell, for women, and it happened this year. rally up some friends, and a womens hi loft softshell could be available for Fall 2010.

these are better. welded softshell, sympatex liner for wetter weather, and completely different construction and finger design.

the inbounds stoic is a great backcountry glove, work glove, but the welder is for full on conditions, and Northwest wet weather.

washing is encouraged. wash with a tech wash, or a delicate soap. softshell treatment is also advised one or twice a season to max the dwr and water replellency, depending on use. wash in is not advised on any softshells, since you want the exterior to repel, but you want the lining to wick moisture away, and drive to the outer surface.

durability of the hi loft- zip the jacket up and wash right side, exterior out. and a hint to help with your monkey fur - wash it with monkey fur side inside, and this minimizes pilling.

the best always seem to come last. black and orange showing 22 of december, they are some good colors.

nikwax leather treatment is best for treating, its not waxed based, but water based.

the treatment will do a good job of cleaning, while treating, because the water base does a great job of getting the gunk off.

the welder is intended for backcountry touring, aerobic activity that requires the most breathability, and comfort when sweating. if you are looking for just warmth, the firsturn would be better, or check out the stoic welder insulated.

if you are in the rockies the welder insulated will be great. if you are in the northwest - crystal, alpental, mt. baker, whistler then the bombshell would be better for that warmer wetter climate.

sorry mediums are out of stock for the season.

similar fit, but longer sleeves than last year, per last years community comments.

we will guarantee that it will not leak, that the materials meet your expectation of 20,000 mm water proofness, and the seams are built to last, and to hold up to extended use. there is some maintenance that is required for the jacket to maintain its water beading, repellancy. the care label states:

Wash me often
for optimum performance frequent washing required

Wash: After securing all zippers and closures, machine or handwash your bombshell garment using Nikwax Techwash

Treat: after washing, use Nikwax TX direct wash in to improve water repellency.

the Stoic welder Hi has a taller pile, that is super soft, so it has more insulation value, but incremental.. in practical use it could withstand 10 to 20 degrees colder temps. but, because it has this extra warmth, and we know from backcountry skiing in it, that you can get warm, we added pitzips on this style to help vent out the heat. great for someone that gets cold, does alot of side country, or is warm and clammy in goretex.

thanks for clarifying... yes, this particular fabric is 20 k. some of the event materials, from last year, the heavier fabrics were 15k, so we put the lower number.

Thanks for pointing this out, there was some 'interference' between the two.... if you have the 30% bro code, it should work now.

there was some 'interferene' with the two... the 30% bro code should apply... thanks for pointing it out!

same materials as the backcountry stoic event.

great performance, the best performance of ALL waterproof breathables. waterproof is 20k, breathability is 20k, higher than any other waterproof breathable.

hood is helmet compatible. the softshell material allows it to fit close and is weather proof, powder proof, and also tends to be made for more backcountry use. the extra weight of snow skirts and more bulk tipped the scales. good input though, we would like to make all these jackets with all features, and No features, so that all users got exactly what they wanted! Stay tuned for future styles!

this jacket uses a soft shell material, with no membrane. great weather proof material - wind and water resistant. and because if has not membrane, this softshell is quieter, stretches more, and lighter weight, great for us that live and ride, thrive in the Wasatch. if you are in the northwest, and you ride in the full on wet weather, then i would have to suggest the bombshell material!

this weight looks accurate, it is heavier due to the extra features of snow skirt (this can be zipped out), and wrist gaskets.

stoic gear is made in a variety of places, all go through strict standards for long term sustainable, and socially responsible manufacturing. this stoic breaker, is made in Canada

this stoic bliss is a 17.5 micron which is softer hand, and even more comfortable, than the backcountry bliss of 18.8 micron. this material is the softest available, softer than smartwool, icebreaker. hell, its even softer than organic cotton!

unfortunately your height and weight does little to help us suggest a size... see the size chart, measure your actual chest, and you should be able to choose.
weight, its lighter and softer than the icebreaker 260. winter runs in 40 degree, no wind, should be good on its own, but a winter run, 30 degrees, no sun, and windy..... you need a soft shell that breathes, but cuts some wind.

insulated bombshell will be available in black colorway, available around Nov 18th.

the stoic bombshell insulated jacket has the snowskirt, and wrist gasket. this bombshell material is pretty quiet, a bit of stretch, and feels very soft. while not a strict 'softshell' its blurring the lines.

hi loft welder will also come in red! coming soon!

actually stoic has become a focused brand, that came from the backcountry stoic jacket and other products we have developed. this is made in Canada, backed by a great Stoic guarantee, and supported by backcountry.com

sizing - yes similar sizing to the stoic shell, although this layer is a little more snug to fit under jackets. if you want to fit over a jacket, after topping out on a backcountry climb, go up a size.

the shell is a 15d nylon taffeta. the slight sheen comes from a calendaring process making it more wind resistant, and down proof for our other jackets, but not soft next to skin. the synthetic insulation is an optimum synthetic insulation, using recycled polyester that is processed into a microfiber. great insulation, great compressibility.

no these are made in china. the best factory in the world. the US does not make anything like these jackets, never have. backcountry.com backed brand means great performance, fit and value.

similar design and cut to the overhang, but a better fabric than the powershield. the overhang powershield it lighter weight and good for spring summer fall. this tour pant uses a heavy stretch woven material, great for fall winter spring. And as you described a key new feature of zipped cuff, and keprotec ski guard.

the flat lock seams are detailed in the small detail photos. this stitch uses 5 threads and holds the material flat.
This 17.5 micron merino wool, is softer than smartwool, or icebreaker. Lightweight can be used in spring summer and fall, but can depend on early morning temps, to late afternoon temps. choose the darker color for more opacity.

this small necked bottle is pretty dang easy to drink from. what are you interested in, for easier? klean kanteen has a couple other options, check online. they have a sport cap and a sippy.
http://www.kleankanteen.com/products/accessories/klean-kanteen-caps.html

try the new water based nikwax. sno seal will in fact seal, but also make them less breathable. smearing that wax based stuff all over fills pores, makes the glove stiff, and less breathable.

treating the stoic inbounds for the next season - use the new nikwax leather proof, its a waterbased treatment, that works well, but will not smell chemical. keep them treated for another couple years of use.

the stoic inbounds glove is made with goat pittards leather, and softshell materials, all breath great. the wool lining also does a great job of feeling dry, even when you get sweaty palms. there is no liner, or goretex bladder inside this glove so they breathe much better.

proper fit of the stoic inbounds glove. if they are tight in terms of hitting the tips of your fingers, or thumb, and does not sit well in the thumb crotch, then send them back and get an XL. the glove does not stretch much, but the lining will pack in a bit, as you wear them.

about 170 gsm, a great fall, winter, spring piece.

thanks for the suggestion.

the rei mistral is a jacket - full zip, and more generous 'corporate cut'.. not powershield and 18 oz.

the RIME is powershield material, athletic cut. 10 oz.

I use this rime in many conditions - spring summer fall. it breathes great, and protects well. but what i like most is that its everything you need. the rest is left off for a reason. less is more.

not sure what your sizing is, but if your tall and lanky, check some of your measurements, and get a size up. the arms are long, the arm holes are fitted, so this minimizes the lift on this jacket. this material stretches well, over 10% stretch, but it is still a laminated powershield for great wind and weather resistance.

these pants are very durable, nylon material. they are also a great weight for spring and fall as is. add a baselayer and you would be great for full on conditions.

and your question about whether these are good and presentable for officials, i think you will be happy with with them. the bit of mechanical stretch, and the DWR allows them to stay clean and look good for a while!

The event shell is more durable, and more substantial than a goretex pac lite material. breathes better and more comfortable too. this event material is three layer, and a durable face fabric and a tricot lining to help absorb and wick moisture through the material. the pac lite is engineered for light weight, and stashable, but they then use the lightest face fabric, no inner lining.

if you are out there harassing trees alot, check out the stoic 2.0, with bombshell, as the name suggests, its way durable.

the stoic 2.0 jacket with bombshell is made for more fall, winter, spring season, it can handle the backcountry, sidecountry, and inbounds skiing.

yes this merino bliss is designed as a base layer. fitted throughout the body, longer in the arms for complete wrist coverage, and longer in the back hem to keep it tucked in. check out the 'view sizing chart' just under the 'select options' tab for chest and waist measurements. you can size up if you want it a little looser.

i would agree with lawson bunch on this. this jacket, because the event material does not stretch, does fit tighter than a typical medium. if you want to layer up inside, go up a size for some room.

check out the merino zip tee, there are some great prices on these, and larges are available.

or hang tight until October, more are coming in.

these are light enough to be good on 25-30 degree days, they breathe well, and will not be hot. on colder days, more wind, and 10-20 degrees, a merino layer, or a baselayer would be great, a bit more insulation, but still breathe much, much better than a goretex pair, or similar shells.

night is black socks, with gray highlights.

sky is more like a dust storm!

the welder material is the Polartec Powershield. this has great breathability. we actually measure the breathability with Air permeability - you can feel a little wind able to blow through the softshell to help in venting. The powershield will not hold up to constant rain, or warmer winter conditions of snow that melts on you.

the Stoic Bombshell material is water proof. because it has a waterproof lamination, you lose some of the breathability. still great breathability that rivals goretex, and membrain, but can not compare to the awesome breathability of powershield

yes, these are a similar cut, however the materials are different. this wool has more stretch and give to it, so it can fit a little closer to body.

the insulation value of this is much better than a shell. the inner fleece lining adds considerable insulation, while the wind limiting shell improves the feel of insulation, especially in alpine conditions

measure your chest and waist, and check the tab just above the price 'view sizing chart' . note that this sizing is body size. i would say a medium, but the best way is to measure and compare with the chart.

the Polartec powershield will have better stretch than the conduit, less expensive but still better than schoeller. this is a lightweight material that has great stretch but still really tough nylon material.

accurate sizing for waist and hem.

large thighs are common around the backountry office too, as we say, the LOW SPEED QUADS. we put plenty of room in the thighs.

the stretch is great too. a medium should fit great!

back pockets are zippered secure pockets. the front are easy access slash pockets.

these are very quiet. softshell material from polartec, this is not a laminate, but a nylon stretch woven that wears well, but still quiet, stretchy, and soft, and very breatheable

the material is a powershield from Polartec. killer fabric, stretch woven, great windproofness and breathability.

the inbounds will take on the Kinco head to head. the inbounds uses goat leather, the kinco uses Pig... not as durable. also the kinco is cotton lined, so while you may look like a rancher, the wet and not articulated glove will also feel a ranchers glove, not a skiers glove.

i would also say the inbounds is warmer... the inbounds uses a wool lining, that stays warmer, does not pack out, and stays warmer, even when you got the sweaty palms.... breathe....

this jacket is POWER SHIELD material, a very different material than the fleece powerstretch.

Power shield is a laminatiion, with a two layers of fleece, bonded to a inner laminate. this is a complicated process to build this 3 layer laminate, but the benefits are then far more water resistant, wind resistant, warmer, and yet breathable.

both the tahoe, and the lighterweight panels are powershield. the gray may be a little cooler, as it has a thinner and softer face fabric.

Large is good for you.... i will add a photo of one on a body.

VIO POV - napolean pocket is good sized, or the hand warmer are super big.

5 oz, this is lightweight 120 gm merino wool....

Country of origin is Canada, and New zealand wool.

this largely depends on the environment that you ski in - normal, or nuking...

Nuking weather - Stoic 2.0 - if you snowboard in the rain, warm wet snow, on the snow alot, or spending most time in really wet weather, or even fishing in the bering sea. A bit of mechanical stretch makes this quieter than most water proof breathables.

normal weather - Shift welder - this material is made to handle the conditions that most people are in, most of the time. good weather, but cold and needing insulation, windy or fast skiing or boarding, and need windproofness, and can handle snow, wet snow, and some rain. the Shift welder performs on the ascent, breathing far better than any waterproof breathable.

nikwax softshell proofing will work great. be certain to only spray it on the outside, but keep the fleece inner as is so that it can continue to wick moisture away from your body.
after applying the softshell proofing, i tumble dry in a low heat. it helps to evenly coat the outside, and dries the DWR finish in place.

klean kanteen stainless steel is not lined, and does not need to be lined. aluminum bottles, such as sigg and others must be lined.

The stainless, unlined allows a clean taste, no chemicals, and in a pinch you can even heat water in the Klean kanteen, but keep the lid off!

getting the welders out there to the right people.... The Bros, not the pros.

its an insane deal on SAC! good luck if you can get one!

never heard of these numbers.

these jackets are made from an event laminate (that all have a superior waterproof rating 15k, and MVTR of 20,000), and use a lightweight nylon face fabric. i do not unit weight of this fabric, but the jacket is 14oz.

the merino wool is tough to beat! the cocona will stay drier with its wicking. but this cocona is best used for the 'done in a day' and active sports.

Cocona Materials is a carbon infused polyester. if you can see the inside of the shirt it is darker carbon color, used next to skin.

The carbon is a byproduct from the water filtration industry, and is carbon that comes from coconut shells. coconut shells are very dense, and also a byproduct of the coconut milk and meat industry. this very fine carbon powder is extruded with the polyester, creating surface area equivalent to a football field in a shirt! this surface area allows incredible drytimes. it does not feel like a typical synthetic shirt, but much drier. the carbon also does a good job of NATURALLY absorbing odors.

Air permeability rating is like 7 CFM, which allows some slight wind to pass through. while windproof, this does also allow great breathability, allowing small amount of air in, to carry away the humidity found inside. Goretex is zero air perm, and you often feel very clammy inside, with out any of this venting

To be accurate - 'breathable' is really 'moisture transfer'. When its cold and you start sweating you will see steam (moisture) escaping through a "Highly Breathable" jacket. you will not get this on a goretex jacket, only an Event jacket can compare to the powershield in moisture Transfer."Highly Water Resistant" means it will shed snow, and shed rain, due to a outer smooth face treated with Durable Water Repellent (DWR) finish. in most weather you will still be dryer than in a goretex shell. Reapply a DWR finish for optimum repellency (similar maintenance as lubing a chain on a mt bike, for best performance). in a torrential downpour, it will eventually wet out, and get wet, best to have a event shell in these conditions to keep all water out, but also allow moisture to be transported out.

The Event Stoic is paper thin materials. the stoic 2.0 uses our Propietary BOMBSHELL materials, which as the name suggest, is bomber. a tougher face fabric, with a bit more stretch, this material is more durable, and therefore a little heavier.

The Stoic 2.0 uses a proprietary BOMBSHELL material. While it does not breathe quite as well as event (nothing does!), it has some advantages. 1. BOMBSHELL materials have stretch, event does not. this means a closer fit, but still great range of motion, event you need to wear a larger jacket for the same range of motion.2. BOMBSHELL material is quieter, rattles less when your bombing down a bowl at 50mph.3. BOMBSHELL materials are weldable, event is not. The Stoic 2.0 is welded construction, all flat seams, more efficient to manufacture a fully waterproof low bulk, 3-d fitting jacket.The Stoic 2.0 is more durable material, great stretch, great fit, and waterproof thanks to the bombshell material.

check out the same merino crew, but in new colors for 2009. bcc0181http://www.backcountry.com/store/BCC0181/Backcountry-Merino-Crew-Shirt-Long-Sleeve-Mens.html

black, size medium is there. jump on it while it lasts! we have move to new colors for this season

this alpaca is a dark rich brown, and this is the natural color of the fiber. not dyed. care instructions - similar to cashmere, hand wash, or wash carefully in a delicate wash cycle. flat dry. please note that this natural fiber requires less washing...

check through some of the other reviews and comments, much of this stuff is described, and more about the material, stretch, and features. it is a 22 oz jacket in total. it is a 4 way stretch material, it does have a asym hem, longer in the back, and it is helmet compatible

it is very warm! 800 fill down provides great insulation, with low weight, and you should be good to zero. you can even layer with this under another larger parka or shell, and you would be set for below zero temps. check out the picture below, this weather is like 7 degrees, and 20 mph ridge top winds.

always consult the care instructions, but this is machine washable, gentle cycle, best to just air dry. this may shrink a bit due to the wool blend, but only 2% or so.

the snorting elk at crystal? I love that bar! the Welder does not have pitzips - but it being a true softshell it is far more breathable than the genesis (genesis is really fully waterproof shell). the powershield materials are very weather resistant, and works great for cold, windy, snowing, blowing weather of touring, and downhill. it would not be the right jacket for the nasty 34 degrees and raining weather of the NW, bring a rain shell for that weather.

Both are new this year and made in the usa, using alpaca fibers from south america. The only difference is design Puno is slightly taller than the Cajap.

I used Nikwax tech was to wash mine. Wash on cold, and add 2-3 capfuls of Nikwax for 1-4 Garments. Be sure to rinse thoroughly, Medium will fit you I am 6' 165 pounds and a medium is what I rock. I just wash all my gear normal but not often. normal wash, and softshell proof once a season (just like oiling the chain).

98% is what the fabric is rated to. this is the sweet spot. to get 100%, you then just wet from the inside! unless you wear event.Wore the jacket today in 30 mph winds at 7 degrees and did not feel the wind.

Nope. that is true. The alpaca fibers, is SO SO soft, fleece would feel like scotch brite. Alpaca is finer than merino wool, AND is hollow fiber. this makes even more flexible, softer, and warmer because of the insulation properties. Seriously, this hat does not need any fleece lining.

center front on the stoic event is 25 inches, from neckline (where a crew tee neck opening hits) down to the hem. these are lightweight, and meant to hit at the hip, but do not have alot of extra length. check out the sizing chart for sleeve length measurements.

check out bcc0178 for the new style this year, available in two new colors!same fit, same construction, but with an updated italian wool, and new colors for this winter

the pocket openings are zippered, but will easily accept skins. I also require this functionality, and usually put one skin in each pocket. the pockets are large, like 6inch x 17 inch, so a skin folded in half, and then in half again is usually a good fit.

the tahoe in the main picture is an accurate image of the shift composite in tahoe. subtle differences can occur in screen color calibrations on your computer

21 oz for a size large

the stoic event shell has a single pull zipper on the front. Simple on and off, with less futzing with that dual slider. it is also short enough that the lower slider should not be needed. no inside pockets, but the hand warmer pockets extend up to the chest for a large skin pocket, wear one in each pocket, and rip that backcountry powder!

The Shift softshell is a heavier material, and as you said perfect for fall/winter/spring. even though a little heavier, it has a full zip, hand warmer pockets, and more durable face fabric. the rime is great for spring/summer/fall, and half the weight of a shift jacket.

The rime pullover is made from powershield material, the tau is a hard face fleece. I have used both and the powershield RULES! powershield is way more wind proof, and lighter weight and less bulk. the tau is good layering and would be fine in nice weather, but if it gets windy, wet, or snarly out there you would wish you had a RIME pullover

merino wool is as soft as cotton. the wool of the old days were course, and itchy, but the merino that backcountry uses, is very fine denier (18.8 micron), and knit into a very soft jersey. you will not want to take it off!

the pullover is meant to be fitted. this minimizes extra material when wearing a pack, reduced wind flap mountain biking, and allows easier layering

XL. You can wear extra layers underneath a jacket that's too big, but you can't make the sleeves longer. You will be really uncomfortable if the sleeves are too short.the sleeves are longer on all backcountry product. made for reaching for ice, or poling your brains out. i would say a large