- Home
- Snowboard
- Snowboards
- Split Snowboards
- Voile Universal Splitboard Binding Interface
- Split Snowboards
- Snowboards
- Snowboard
Voile Universal Splitboard Binding Interface
Voile Universal Splitboard Binding Interface
The Voile Universal Splitboard Binding Interface is the industry standard for backcountry splitboards. Companies such as Burton and Winterstick have completely abandoned their own designs and have adopted the simple and foolproof Voile system. This interface includes all screw-mounted hardware for the touring and riding modes and a pair of Universal Slider Tracks and Slider Pins to quickly switch back and forth from the touring to riding modes. Almost all snowboard bindings on the market today are compatible with the Universal Slider Track. The Voile Universal Splitboard Binding Interface is the only way to go if you need a binding system for your splitboard.
Bottom Line: The Voile Universal Splitboard Binding Interface gets you into the backcountry—combine it with any homemade or manufactured splitboard such as the Burton S-Series and enjoy the pow.
Talk shop with all the gear freaks out there: ask 'em questions, upload/browse photos, and give your 2¢.
DO I need the split board decision lit and the binding interface...
DO I need the split board decision lit and the binding interface kit to covert a snowboard to a split board and put bindings on the split board so I can use it? Seems like you need both kits - but I am not sure.
By: Jimmie
13 hours ago
This is all you need except for the saw.
By: DakkaGuru ![]()
4 hours ago
Is this all you need to make your own homemade split board? ...
Is this all you need to make your own homemade split board? This will serve as the hardware to connect the pieces at the cut?
By: joel.kuhn1677991
October 22, 2008
This'll do it as far as the connection and the binding adapters. You will still need to sand, etc. the cut edges so they don't get waterlogged, something a lot of people forget.
By: Angus Bohanon ![]()
October 22, 2008
Do you need special boots for this binding? Are these bindings...
Do you need special boots for this binding? Are these bindings just for going up, and then you switch to high-backs?
By: christianc2145920
March 30, 2008
Hi, I work for Backcountry.com. These plates allow you to mount your snowboard bindings to them so you can tour on the climb, and with the switch of a pin, you can set them back on the board once you have put it back together to ride down. You only need your snowboard boots, no special boots are required. Thanks for your question.
By: Backcountry.comGuruChristian ![]()
May 28, 2008







