- Home
- Ski
- Telemark Skiing
- Climbing Skins
- Black Diamond Ascension Custom STS Climbing Skins
- Climbing Skins
- Telemark Skiing
- Ski
Black Diamond Ascension Custom STS Climbing Skins
Q & A
More
Detail Views
Black Diamond Ascension Custom STS Climbing Skins
Pre-cut Black Diamond Ascension Custom STS Climbing Skins come in a wide variety of sizes to give you a precise fit without any knife time. Durable Orange Plush synthetic hair holds up to seasons of abuse, and the bomber, pre-attached tip and tail loops won't give you any trouble either. Black Diamond left a glue-free strip down the center of the Customer STS Climbing Skins to make them easier to remove from your fat sticks.
Bottom Line: The Black Diamond Ascension Custom STS Climbing Skins—knife not included because you don't need it.
Talk shop with all the gear freaks out there: ask 'em questions, upload/browse photos, and give your 2¢.
I have a pair of Volkl Kuros 175s (164-132-139), what skins and
I have a pair of Volkl Kuros 175s (164-132-139), what skins and sizes do you guys reckon for me?
By: MadDog
May 26, 2009
I have some Bluehouse district-187 134/103/122 and am thinking
I have some Bluehouse district-187 134/103/122 and am thinking that I need a 120mm. Just never bought skins before. I have been advised to get the ascensions but just was not sure on size.
By: jeffymadness
April 22, 2009
Yeah, go with the 120mms.
By: Alexander Klivecka
April 23, 2009
Sticky and Grippy
By: Julian Carr
April 6, 2009
Let me just say I have had issues with skins in the past. FINALLY these BD skins are what I have been looking for. I've used them all season in the Wasatch and BC. Warm weather, really cold weather. They stay on, they stay sticky, they stay grippy.
All rolled up and ready to stow
By: Jonathan R Morrey
February 11, 2009
This is a good way to store your skins in your pack without them sticking to everything. ...in fact, I think it's the only way. Note these are the same pre-fit skins shown on this page ...the tip loop looks different simply because I got the wrong size and had to trim the length old-school style.
I bought these puppies a few months ago and I have never been
I bought these puppies a few months ago and I have never been able to fit them in the bag provided in the kit. Am I just not being agressive enough with them?
By: Bill of Bucharest
April 22, 2009
I don't know how you're trying to get it done so I'll just describe my technique. Fold 'em in half over the skin saver first (tip to tail). Then fold again, and again, as flat as possible until they're about a foot long. Then roll 'em and squeeze 'em and they should stuff in their bag with a bit of work. I was taught to not store skins in the sack and to keep 'em flat and in a cool spot. I generally only bag mine if they're going to be tossed into the trunk of a car. I don't bother with the sack when out on tours. Too much to fiddle around with when my hands are cold. I hope this helps!
By: Elias the Terrible
April 22, 2009
Yeah - I fold them over the skin saver, then fold em again etc. I guess I am just doing a simple fold from 1 foot to 6" rather than rolling them. Good tip about not storing them in the bag - one more thing to upset my wife when she opens the spare bedroom cupboard to see skins hanging next to her nice dresses!!
By: Bill of Bucharest
April 23, 2009
Great traction with wall to wall carpeting
By: David Belden
February 12, 2009
I just spend a week touring in BC with a new pair of STS Custom skins fitting to my Volkl Gotamas. They took a bit of trimming (easily done with the enclosed trimming tool), then they were good to go. With "wall to wall carpeting" the traction was amazing. Better that any of my prior skins. Couldn't be happier with them.
i have a pair of 07 public enemies 163 dimensions are 118-85-109
i have a pair of 07 public enemies 163 dimensions are 118-85-109 what size skins should i get
By: pkandrews1751749
April 21, 2009
Trim down a set of 120mm in the 161-168 size, and you will be fully covered.
By: Shane O'Donnell
April 22, 2009
Taking off the skins before heading back down
By: Jonathan R Morrey
February 11, 2009
This is what it looks like when you pull the skins off your skis. It makes a wicked cool ripping sound! Be careful not to let the sticky side of the skin. come in contact with the dirt before stowing them!
Volkl Mantras - 177; dimensions are 133 - 96 - 116. What size
Volkl Mantras - 177; dimensions are 133 - 96 - 116. What size do you recommend>
By: ogabrielso1954270
April 20, 2009
The 120mm would work, but they don't have your length in stock, so you might need to either wait or unfortunately shop elsewhere.
By: Shane O'Donnell
April 20, 2009
This is what the doctor ordered.
By: cfiore6006690035
May 1, 2009
These skins are easy to trim to match your skis (the "Bottom Line" is wrong; you will need the included cutting tool), and only takes about 10 minutes from start to finish. It might be a little frightening to cut into your brand new gear, but once you get past that, it's too easy. In the field, they're simple to get on and off, and I've never had trouble getting them back in the bag, except when I've got mittens on. They're not delicate - use the screen they come with, fold them a few times, and manhandle them in. Don't forget a couple of wipes with a wax block before you go, in case you get them wet. Once they're wet, snow sticks to them underfoot, and you're in big trouble.
I have a pair of EHP's, they are 186 in length and the dimensions
I have a pair of EHP's, they are 186 in length and the dimensions are 129/113/118. What skins should i get
By: Danny Skilling
March 19, 2009
I am of the camp that believes you should buy skins for the widest part of your ski and trim from there. In this case, you would want to get a pair of the 120mm. The 110s will work but will not provide full coverage. You will want the 179-186 length.
By: ESTtoMST
March 19, 2009
ciao. I luv my gotamas 183. which skins do you recommend?
ciao. I luv my gotamas 183. which skins do you recommend?
By: Tomasso
March 17, 2009
BD Ascension Skins 110mm, 179-186cm. You're stoked.
By: Elias the Terrible
March 17, 2009
No complaints
By: Jason Kowitz
March 2, 2009
What can I say, they do what they're meant to do - climb. This is my first pair of skins, which I've been using on my Volkl Mantras (130 mm width skins). They've got great traction and they're easy to trim/intuitive to use. For those who don't know, they're fairly bulky when in their folded state, so don't expect to fit them in a pocket.
I just got a pair of Line Prophet 100's in 186 length. What
I just got a pair of Line Prophet 100's in 186 length. What is the correct size skins to get for these skis?THanks
By: Nick English
March 11, 2009
130 would work.
By: Andrew
March 11, 2009
Hi- I just got some 160 cm Phat Luvs (135-102-112). I know that
Hi- I just got some 160 cm Phat Luvs (135-102-112). I know that the 130 mm skins for sale here will be wide enough, but it says the length is 167-174. Will I be able to trim them down for 160 cm? Thanks!
By: NG
March 6, 2009
No, you're going to have to get the regular STS, not the customs, which can be trimmed for length.http://www.backcountry.com/store/BLD0787/Black-Diamon
By: Erica Carley
March 6, 2009
bd skins
By: ski-n-free
January 28, 2008
great skins, easy to cut and mount. i used a utility knife rather than the one that came with the skins. i never cut skins before - less that 30 min later the job was done... you can't go wrong with these!
Write your question here...I have a Pair of 188 Salomon Guns...Looking
Write your question here...I have a Pair of 188 Salomon Guns...Looking for the right Size skins, if you have them....134-101-12?.....What do you have that would fit?
By: Scott
March 2, 2009
The 110mm, 185-192cm skin will work for you. A skin that you cut for an actual custom fit would be nicer, and less sloppy though.
By: Shane O'Donnell
March 2, 2009
I have new 165 BD Havoc 122/88/110 and need to know what size
I have new 165 BD Havoc 122/88/110 and need to know what size BD Ascension Custom STS skins will work best?
By: slg467984
February 27, 2009
It doesn't look like they have any left in your size range...but you can just get the sts skins in a 120mm and cut them to size, and sew the tip loop on. Then they are practically the same things.
By: Evan Stevens
February 27, 2009
Well Hello super traction
By: Mike Pavsek
March 2, 2009
These skins rock !!! They were very simple to custom fit to my Volkl Mantra's these skins hook up great you can go up some steep lines a lot steeper than my friends can go up using their skins while they are slipping downhill I'm one step closer to stealing their powder!! The only bad thing I could say about these skins when you fold them up they don't compress like i thought they'd roll up with the traction they give it's all worth it!!
Wondering which size to get for the Black Diamond Verdict ski
Wondering which size to get for the Black Diamond Verdict ski in a 180...
By: sam2528829
February 26, 2009
you should get the 130, but it doesn't look like they have any now. check out another brand. you want a skin that is about as big as the tip of the ski.
By: Gabe Westheimer
February 26, 2009
I have a Volkl bridge 161 length. other dimensions 130_92_112.
I have a Volkl bridge 161 length. other dimensions 130_92_112. What size skins would be best for the fullest coverage?
By: Sarah
February 25, 2009
110, 155-162
By: Angus Bohanon
February 25, 2009
great skins
By: dcaulton1769515
April 2, 2009
Bought these for a pair of K2 Workstinx tele skis. I've climbed up 3 good size mountains now and love these. Cutting to fit was easy with the tool, the fit is perfect (other than some minor mistakes I made cutting) and the grip on the hill is excellent.
My one minor nit would be that these are definitely climbing skins, not gliding skins. I can't imagine wanting to go horizontal for any real distance in these. However, I think that's true of all skins so it's not really a fair complaint...
I have been going back and forth on what skins to get for my
I have been going back and forth on what skins to get for my 07 Seths. They are 179 lenghth (103/98/120) and I have been told that the 130mm widith skin is the way to go. Unfortunately I have been unable to get any (have ordered them twice only to be told they were out of stock). Others have said I can go with the 120mm width with no problem. Which is it? 130 or 120? Also will the STS and or STS Custom accompdate the wide tip? Please advise.
By: Mark Hartzell
February 24, 2009
120 for width is fine!
By: Mike Traslin
February 24, 2009
It's fabric with little hairs that point one direction so that they can easily slide one way but not the other. The other side has strong temporary glue on it to stick to your skis, and the upshot is that you can stick it to your skis and hike uphill. you do have to think about your bindings, climbing wires, and maybe even crampons depending on how steep it is, but that's what skins are.
By: Angus Bohanon
February 18, 2009
Great Skins
By: Dionisiosc949961
March 23, 2009
Wow...these skins make ascending into the backcountry a sinch. Never expected how easy it would be. Highly recommend!!!
I have a pair of 06 Havoc Skis from Black Diamond that are 163's.
I have a pair of 06 Havoc Skis from Black Diamond that are 163's. What size skins do i need to buy?
By: Vincent Barone
February 14, 2009
Figure out the waist measurement, order the next width up then trim them down. If you'll be hiking on harder, heavier snow, get the next width down.
By: Angus Bohanon
February 14, 2009
so when your sizing a pair of skins and your ski size lands in
so when your sizing a pair of skins and your ski size lands in two sizes (example ski length 173 and your options are 167-174 or 173-180) is it better to go tight or large, and if large is there a chance that the skins will strech and no longer fit?
By: Josh
February 13, 2009
If you go with the 167-174, the clip will be near the end of the orange tail. With the 173-180, it will be near the end of the skin. That is what I would suggest because it gives you more tail to grab onto to rip off the skins.
By: Jeff Mikaelian
April 6, 2009
Black Diamond Ascension Custom STS 110mm Skins
By: hol2976787
April 6, 2009
Overall good except that after using them just twice- lost a tail clip while preparing to go on a trip. Luckily, with strong glue was able to do the trip just fine.
i have rossignol BC girl 150cm with tip dimension:124 waist:94
i have rossignol BC girl 150cm with tip dimension:124 waist:94 tail:117. What size should i get for skins?
By: quinn mawhinney
February 13, 2009
110 mm, 155 cm.
By: Angus Bohanon
February 13, 2009
I have Black Diamond Crossbows, 163 cm, 114-83-104. Which custom
I have Black Diamond Crossbows, 163 cm, 114-83-104. Which custom skins would be best? thx!
By: Chellie VanVoast
February 10, 2009
110mm wide 161-170 length would be my advice
By: Evan Stevens
February 12, 2009
sts climbing skins
By: Smokie On The Run
February 3, 2009
this is my 2nd pair of skins. the first pair I got a cheap pair. they worked but they left something to be desired on the steeps. got this pair and am pretty happy with them. first time I used them i lost the clip on the back because I apparently wasnt putting it on tight enough. I called up bd and they sending me another one free.
Have a pair of Karhu Guides 175's. 109-78-95. What size skins
Have a pair of Karhu Guides 175's. 109-78-95. What size skins should I get. 110-173-180 or 110 167-174. Thanks
By: scottdclc923225
February 10, 2009
I would probably go with the fist choice of 173-180.
By: Evan Stevens
February 10, 2009
I'm looking to fit my K2 Mt Baker Superlights in 174 length.
I'm looking to fit my K2 Mt Baker Superlights in 174 length. They are 120-88-108. I hear that K2s run a little long. What size should I get? Thanks.
By: tom2855582
February 7, 2009
Probably go with the 173-180s in 120mm width. But you could also get a normal pair of sts glidelites and not bee worried about length as you can cut them to size.
By: Evan Stevens
February 10, 2009
Black Diamond Ascension Custom STS Climbing Skins
By: SCHAFF MOBILE
March 18, 2009
I recently aquired a pair of K2 Work Stinx & needed wider skins. A good friend recommended the BD Ascension STS pre-attached tip and tail loops. They work great.
I have a pair of Fischer Atua's and am looking for the right
I have a pair of Fischer Atua's and am looking for the right size skins. They are 186 long and 96 under foot. What size do you think I should consider? They are twin tips also.Thanks,Walt
By: Walt Layman
February 6, 2009
Go with the 120mm -- i'm not sure what your tip is but i think this should do. b/c they are out of the 130s that will fit your skis.
By: Gabe Westheimer
February 12, 2009
I'm looking for a new pair of skins for a long (190cm) pair
I'm looking for a new pair of skins for a long (190cm) pair of Atomic Tacora's (dims'113-80-104). Will thees in size 110,-185-192 work for me?Thanks
By: mark.feher1887829
January 23, 2009
Yes
By: Bud Martin
January 24, 2009
Work great--but you still need to trim them
By: Erica Carley
November 1, 2007
I got a pair of the Customs for my Black Diamond 173 cm Lyrics, which are 120mm in the tip. I got the 120mm, 167-174 length and they just barely fit my skis lenfthwise. They also required a bit of snipping to get the width right, but it's super easy with the included tool. All that being said, I made it up a pretty slick skin track and didn't slide a bit. They're quite sticky and easy to get on and off. And cheaper than the regular STS skins!
Need some skins!! I have a pair of ski that are 178's and
Need some skins!! I have a pair of ski that are 178's and 128 toe and 98 under foot... what would size would work for me? and for twin tips how do this skins work?
By: Steven
January 15, 2009
You COULD go 120mm. 130 is what I'd buy. These do fine for twins
By: Michael Kisow
January 16, 2009
I need skins for a pair of 169 public enemy 118-85-109. Next
I need skins for a pair of 169 public enemy 118-85-109. Next year I would using some skis that will be 179 130-98-118. Is there a skin that will work for both?
By: jgg81501337502
January 12, 2009
NO
By: Michael Kisow
January 13, 2009
So what size would be best for a pair of K2 Shuksans, 174 cm,
So what size would be best for a pair of K2 Shuksans, 174 cm, 119/78/105? Thanks...
By: kweber135054
January 10, 2009
I would get the 120mm skins, the instructions are suber basic and you will beable to cut it down to your ski. Have fun and ski safe
By: Gabe Westheimer
January 11, 2009
The product description leads me to believe the skins are pre-cut
The product description leads me to believe the skins are pre-cut for ski dimension and not just lenght. Is it both, or just one?
By: bridgemtn
December 20, 2008
They are just pre-cut for length. You'll still likely have to trim the skins to fit the width of your ski. The product description is inaccurate when it claims you can get up and running "without any knife time". However, trimming skins is not really that hard. Black Diamond includes some trimming instructions with these skins.
By: Jonathan R Morrey
February 11, 2009
I just bought a pair of volkl manta 184 cm (184 length, 22.5
I just bought a pair of volkl manta 184 cm (184 length, 22.5 radius, and 133_96_116 side cut). So what size of the Ascension Custom STS Skins should I get? Seems like the th 120 mm is what the size chart leads me to. Comments?
By: chuck1021456
December 15, 2008
120 will do you fine. If you don't mind to spend a few dollars more the 130 would be a little better.
By: Michael Kisow
December 16, 2008
I'm getting a pair of Huge Trouble's and I'm wondering
I'm getting a pair of Huge Trouble's and I'm wondering what size skins I should get. I'm assuming I would get the 130mm width, but with HT's being 185's and right on the borderline, which length should I get? Also, will that size be all right if the ski isn't exactly a 185 since I know lengths can vary slightly between brands and skis?
By: btski450
November 25, 2008
179-186 for sure!! Have you looked into the BD glidelites? Do not go smaller than 130mm.
By: Michael Kisow
November 27, 2008
Will the 130 mm 167-173cm sts skins work for some 164 cm salomon
Will the 130 mm 167-173cm sts skins work for some 164 cm salomon guns skis? Are they going to be too long?
By: Neil Waggoner
November 23, 2008
Too long
By: Michael Kisow
November 24, 2008
I have a pair of 175 Black Diamond Havocs. Would the Ascension
I have a pair of 175 Black Diamond Havocs. Would the Ascension STS be the proper skin and in what size? Thanks
By: mic2507184
November 17, 2008
Ascension STS skins would be bomber for your skis. Pick 'em up in the 100mm size and have them trimmed to fit. Hope this helps! ------------------You can actually trim them yourselves with a letter opener (one of those plastic ones with the little spike and the razor blade embedded in it).Bd Skins come with a trim tool
By: Michael Kisow
November 21, 2008
need twin tip hook or loop configuration. which skin do you
need twin tip hook or loop configuration. which skin do you recommend?
By: ski2502595
October 24, 2008
the STS works best if it has a flat spot on the tail to grab on to. If they are round like and old style ski tip then one might be best off to go with a STD skin with no tail piece.
By: bradb38954
October 29, 2008
Change me.
