Select your style & size:Select options
Keep your crank arms turning smoothly with the SRAM GXP BB86 Bottom Bracket. With two sets of steel bearing housed in nylon cups, this bottom bracket presses neatly into a BB86 bottom bracket shell for friction-free crank turns.
- Nylon cups
- Stainless steel bearings
- Compatible with BB86 road bottom bracket shells
- Item #SRM0362
- Q & A
- Familiarity: I've used it once or twice and have initial impressions
I purchased this BB to change my FSA crank to a Sram Red crank. This is exactly what you need if you have a BB86 frame and want to install a Sram/GXP 24mm spindled crank.
Installation was a breeze. I used a 32mm socket to tap the bearing cups in to place. Went in good and true and with ease. A quick note on installation: The spindle on the Sram crank is tapered. The drive side is the larger end of the spindle. The bearing cups are sized with the drive side having a larger ID than the non drive side. Therefore, make sure you install the right bearing on the right side.
Bearings roll well! No problems for me with this BB.
hi there will this work with a Scott R4 as well? thanks
will this BB work with Scott R4?
would this work with scott R4?
Would this works with Fuji Altamira 2.0...
Would this works with Fuji Altamira 2.0 2011 frame, i'm planning to get SRAM force crank to fit in the frame.
Yes that will work. You would then be able to use the GXP spindle.