Free 2-Day Shipping on Orders Over $50* Up to 25% Off Marmot– Save on Clothing and Gear

Share your thoughts



No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

    Add a:
  • Share a photo
  • Share a video


Only jpg, jpeg, png, gif or bmp files please.

Now review from the App.Download

Here's what others have to say...

How would these attach to plywood?


To install these holds, you must drill holes (with a 7/16" drill bit) through the plywood, then pound a T-Nut into the back side of the hole you just drilled. Then, simply slide a bolt through the hold you wish to install, place it over the drilled hole with T-Nut installed, and tighten it up with an allen wrench.

The best way to place these holds is to draw a grid on the plywood, and drill a hole at each line intersection. The last wall I made had a 7" x 7" grid and it yielded 100 holes per 4'x8' sheet of plywood.


Good starter set, but could be better

  • Familiarity:I've put it through the wringer

Nice holds to fill in a blank wall. Great choices for feet, crimps, and finger jugs.

The holds did not come cleaned (i.e. the bolt holes were still covered in a thin layer of the hold material). I tried my best at cleaning them but now some of my bolts are stuck in the hold because of the material left behind. Also a few holds came already cracked.

I wonder if this could be a collection of holds that didn't meet their standards.



    I have now ordered this twice and both times I received screw on holds NOT BOLT ON HOLDS. Don't order this if you want bolt on holds. I gave them the benefit of the doubt after they sent me screw on holds the first time but it seems that was a mistake.


    Good part of a start

    • Familiarity:I've used it several times

    Chris Danielson, who sets for some of the pretty major comps out there, suggested this set as a complement to a broader array of Tekniks holds that I picked up as well when I built my garage woody. Really, really nice mix of feet, edges and jugs. Nothing huge, nothing that's going to just blow your skirt up, but a really, really solid collection of holds to get you going in the right direction. If you've got holds now and you're looking for stuff to add, don't go this direction; but if you're putting up a woody and you're looking at starter sets (and you should be super-selective if you are), this is one true value.


    A good one

      love the footchips because they can be used as handholds for crimps or twisted in a way that makes useless for your hands. I set routes on an Entreprise crafted wall, which means the wall isn't flat and we have to crank down on these guys pretty hard, they undergo a lot of stress, and in the past 3 years I don't remember a single one breaking, so I don't know what Kendall is talking about. I'd say a pretty solid assortment with beginner to intermediate level holds


      Pretty Good Set

      • Gender:Male
      • Familiarity:I've used it several times

      For the price and the variety this is a pretty good set. I was hesistant at first given the review about the holds splitting when being tightened, but I have not had any issues. My only complaint would be a lack of intermediate/hard holds, but I guess thats why its called a start bolt-on kit. Overall great variety at a good price.

      you can use the foot holds for hand holds... that's what I do and they're really positive and make for some great crimpy routes.


      Look great, lasted one season

        i work at a summer camp and a previous staff member bought these holds to use on an outdoor wall. Our wall is make of wood with basic t-nuts, and we would constantly get spinning holds with this set while our 10 year old holds would work just fine. I didnt really think anything of it until I would try to tighten the holds to the wall and they would crack in half, making them unusable. Almost 50% of the holds we bought are now broken in some way after 2 months of use. I would not recommend these holds and next time I will definitely buy a much sturdier hold set.

        sounds like i can save my money thanks

        When will you get these back in stock?

        When will you get these back in stock?


        Looks like we have more on the way and they are due the mid April.

        So ill starter kits

        So ill starter kits

        These holds are great, love the texture, really durable and super easy to put up

        What size are the T nuts and Bolts?

        What size are the T nuts and Bolts?

        3/8"-16 Stainless Steel Socket Head Bolts