Free 2-Day Shipping on Orders Over $50* – Limited Time Only

While the Blur Carbon's at home rubbing shoulders on cross-country race courses and the Blur LT Carbon loves backcountry adventures, there was a void that left endurance racers and riders yearning for XC weight with trail-negotiating travel. Santa Cruz listened and answered with the Blur TR carbon that splits the difference right down the middle.

Dressed here in the R XC Complete Mountain Bike kit, the TR Carbon sports 125mm of travel, while favoring low weight. An optimized, high-modulus carbon chassis offers enhanced trail manners due to a slightly slacker head angle, lower standover height, and more travel than the Blur XC. The secret to the Blur TR Carbon's class leading weight vs. strength ratio is Santa Cruz's proprietary carbon processes.

The front triangle of the Blur TR Carbon is constructed as once piece, rather than having components produced separately, and then bonded or wrapped. Additionally, the carbon fibers are continuous around tube junctions -- to distribute load and absorb impact energy better. Plus, the frame looks as good on the inside as it does on the outside, there's nothing except smooth carbon. And just like the Blur XC Carbon, there are no riveted or bonded-on cable and hose guides, as they're incorporated into the original layup. The stiff carbon chassis is paired with the latest generation Virtual Pivot Point rear suspension.

The upper and lower links flatten out the shock rate and provide a more active feel to the early end of the axle path. The suspension allows the rear wheel to move up and back as you ride over a bump, and it balances the downward force of pedaling with the pulling force of the chain through its link configuration and axle path. The resulting movement makes it easier to roll over a bump or through a dip, and the suspension doesn’t change whether you’re in the saddle or not.

The Blur TR has a carbon fiber upper link that shaves weight and enhances lateral stiffness. It's counterpart on the bottom is alloy, and it has easily-serviceable grease ports. The pivots for both links have beefy 15mm locking collet axle-pins so they won't creak or loosen, and they run on intricately-sealed bearings that should last the life of the frame.

The VPP suspension of the Santa Cruz Blur TR Carbon yields 125mm of smooth travel damped by a Fox CTD rear shock -- a lightweight, reliable shock that's features an intuitive interface for simple, on-the-fly suspension tuning. It has three distinct settings; a firm 'Climbing' setting, medium 'Trail' setting, and a plush 'Descend' setting. This keeps operation straightforward and intuitive for beginners and experts alike.

Complementing the CTD rear shock is a 130mm travel Fox 32 Float CTD front shock. Like the 142 x 12mm rear thru axle, the fork sports a 15mm thru axle for stiffness. A hand-laced and tensioned wheelset composed of Shimano M678 hubs, DT Swiss 14 gauge spokes and Mavic XM 119 rims wrapped in Maxxis Crossmark 2.1 tubeless tires spin around those axles.

The Drivetrain is a 3 x 10 composed primarily of Shimano SLX, including the cranks, derailleurs, shifters, and cassette. Stopping the Blur TR R XC is a set of Avid Elixir 5 brakes with 160mm rotors. The brake levers hang on a Race Face Ride handlebar , with a Ride stem and seatpost with WTB Volt saddle finishing the build.

The Santa Cruz Blur R XC Complete Mountain Bike Comes in sizes Small through X-Large, and two colors; Black/Silver and White.

  • Reviews
  • Q & A

What do you think about this product?

Have questions about this product?

Why SLX derailleurs? A $4,000 bike should...

Why SLX derailleurs? A $4,000 bike should have XT no?