Free 2-Day Shipping on Orders Over $50* - Limited Time Only


User-friendly and usage-ready.

The Rottefella NNN BC Auto binding combines an intuitive and user-friendly design with a high degree of boot compatibility. When you're done with a wind-blown tour, press your ski pole tip into the toe piece for an easy release. Notched grooves optimize power transmission so your skis feel like true extensions of your legs, and a wide platform enhances edge control. The NNN system hugs your boots while you lay fresh tracks, and lets them go when it's time to spend some time by the fireplace.

Share your thoughts

What do you think of the

Rottefella Rottefella NNN BC Auto Binding

? Share a...

Write a review

No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

    Add a:
  • Share a photo
  • Share a video


Only jpg, jpeg, png, gif or bmp files please.

Submit Cancel
Now review from the App. Download

Here's what others have to say...

1 5

Extremely difficult to get into

  • Familiarity: I've used it several times

My wife recently got some new waxless cross-country skis with Rottefella NNN "automatic" bindings. Perhaps there's some magic trick to getting them latched on, but it sure isn't obvious! She has yet to be able to do it herself by just stepping down. Unless I bend down, guide the boot just so and apply pressure to the toe, they just don't latch. I was so happy I was still using my old 3-pin bindings, which I've never had any trouble getting into.

I had the same problem when I purchased these as well, now they are easier to get into after a while of use

Recently, had Rottefella manual T3 bindings mounted to XC skis. Where should the boot heel meet the heel plate? One heel plate was set back further then the other, and the inner edge of the boot heel doesn't rest on the heel plate properly; it is forward on it. It seems off by 1/2 of an inch. To close this heel plate in more, would necessitate drilling another hole. Would this compromise the structural integrity of the ski? Much thanks.

drilling another hole would not compromise the ski. Make sure to fill the old hole with glue to seal moisture out.

I just purchased the Fischer offtrack 5 boot and currently have a pair of rossignal evo skis...I generally don't ski offtrack and want to be sure this binding would work rather than the magnum...

Yes, this binding and the magnum are both compatible with that boot!

Awesome bindings

Awesome bindings

Been skiing a couple times on these bindings and they make me jump for joy!

Unanswered Question

Is the screw template of the NNN the same...

Is the screw template of the NNN the same as the NNN BC?

i have always mounted my own bindings,...

i have always mounted my own bindings, (three pins, alpine)...but never any NNN bc,,
do you have any instructions for locating the binding on the ski?? (i have purchased two pairs for christmas gifts and i would like to get them mounted up so we can ski christmas afternoon!!)
thank you

The place where the binding holds onto the pin in the boot should be located over the balance point.

I generally locate the balance points on both skis, then take the average of the two. If you don't have a jig, don't worry. You can directly screw the binding onto the ski (make sure the heel plate is properly adjusted to the boots that will be using the skis).

I would suggest that after screwing the binding onto the skis, to take the bindings off, and then put wood glue in the holes, reinstall the bindings, then let it sit upside down overnight.

If you have any other questions, let me know.

J-Man, Sugarloaf OC Tech.

I just bought a pair of Rossignol X5 NNN...

I just bought a pair of Rossignol X5 NNN boots. Should these fit my Rottefella NNN BC bindings? The tread seems to keep the bar from engaging or I am just thick?

The X5 should fit the NNN-BC binding. Try rocking your foot forward as you push the bar into the slot.

Gonna be honest. The X5 boot is meant for the standard T3 or T4 and the manual versions. The actual sole of the boot is incompatible. The BC X2 (Rossignol) would be the comparable boot to the X5.

Sorry for the bad news.


Is this for a pair?

Is this for a pair?

Yes, this will come with a 'pair" of bindings for a "pair" of skis.