fascinatio319492

fascinatio319492

fascinatio319492

fascinatio319492 wrote a review of on August 26, 2010

2 5

I purchased 2 of these from Backcountry to use for my 16' touring kayaks. I previously had Yakima Landsharks with 1/4" closed-cell foam glued to the cradles. I guess the glue only lasts 3 or 4 years because 3 of the foam pieces came off within a few days of each other. The Hullavators looked like the perfect replacement. I have a few sets of Thule crossbars in different lengths that I played around with for the perfect fit on my SUV with the Hullavators installed. I spent about 6 hours installing, testing, tweaking & so on before I had to pack them back in their boxes and return them.

I'm used to a rock-solid mount with my kayaks. That means that the straps attach to the bars and grip the top 1/2 of each kayak. With the Hullavators, I found 2 glaring problems I simply couldn't work around. For one, the straps attach to the curved cradles & not to the load bars. That wouldn't be so bad, except that the longest curved cradle is well above my kayak, and the shortest cradle is about even with it. With the straps in place, 1/4 or less of the kayak was actually held down by the straps. This resulted in a very loose (dangerous) fit. My only option would be raise the kayaks & hullavators to the travel position & then attach more straps that would attach to the bars. The other problem I had is when the kayaks & hullavators were in the travel position, there was excessive play, wobble, or whatever one would call it. These things lock into place, but they do not firmly lock into place, thus the excessive wobble. Again, the only solution I had would involve strapping the Hullavator to the load bar so that it won't move. All in all, far too much work & far too many straps involved for a safe travel load. Since typical highway/freeway driving exceeds 80mph, along with a number of bumpy dirt roads for lake access, having a safe & secure mount is absolutely my top priority. All they (Thule) would need to do is provide a few solid strap locations on the Hullavator that would accomodate various sizes of kayaks, along with a much better closed position locking mechanism and/or some way to firmly secure the Hullavator to the load bar.

(0)

 

0 Comments

fascinatio319492

fascinatio319492 wrote a question about on May 17, 2010

I'm close to pulling the trigger on a couple of these, but I did have 1 question regarding use. I realize the kayak gets strapped only to the cradles, and that's what makes me nervous. All my prior cradles allowed me to strap to the cross bars, which are firmly attached to the car. With the Hullavator, I would be at the mercy of whatever latch mechanism is used to hold the cradles to the rack. Is this a non-issue, or do some of you also strap to the load bars?

(0)