Clothing

Gear

Accessories

Unconditional money back guarantee – Welcome to gear gluttony
Close This Window
Rossignol SAS2 150 Wide Ski Binding - 2008

Rossignol SAS2 150 Wide Ski Binding - 2008

Item #ROS0410|Out of Stock

2008 Model No Longer Available

Add this to my Gear List  
This product has been added to your XX List

Rossignol SAS2 150 Wide Ski Binding - 2008

The Rossignol SAS2 150 Wide Ski Binding provides expert freestyle chargers with outstanding performance and durability, plus the legendary elastic travel of the Axial2 heel / Dual Action Race toe design. Known industry-wide for its ability to absorb boot shock and recenter without releasing, the SAS2 150 virtually eliminates 'walk-out' pre-release. That means you can run an appropriate DIN setting for your weight, instead of cranking up to a ligament-shredding retention range just to stay clicked in. Full-metal housings front and rear give the SAS2 150 excellent durability and torsional rigidity, while the ball-mounted Dual Action Race toepiece offers omni-directional release in backward twisting falls. The Axial2 heelpiece angles down, rather than forward, to keep your boot properly pressured, and the extra-wide AFD feels solid on big-mountain boards. 100mm-wide brakes fit (or bend to fit) most fatties just fine.

Bottom Line: Pros trust the SAS2 150 Binding, and so can you.

Product Wall

Talk shop with all the gear freaks out there: ask 'em questions, upload/browse photos, and give your 2¢.

Hi, throw your review on the Product Wall to show your Gear-telligence.
Hi, got a question? Ask on the Product Wall.

Would someone mind laying out the primary differences in performance

Would someone mind laying out the primary differences in performance and feel between the Axial 2's and the SAS's? I've been loyal to the Axial 2 140's for a while, and I'm curious about the SAS counterpart. I understand the SAS's don't have any lifters so you're closer to ground with less weight for jibbing, and that they're lighter while sacrificing some of the bomber durability of the axial2s.

By:
August 10, 2009

Was this helpful? (0) (0)

Flag

Would these bindings be ok for me? I'm 5'11" and

Would these bindings be ok for me? I'm 5'11" and 145 lbs and will be mounting them to Moment Donner Parties (140 mm underfoot). If not, does anyone have some other recommendations?

By:
August 4, 2009

Was this helpful? (0) (0)

Flag

Rating for this product: 5

Burly, Stong, Safe

By:
August 2, 2009

These bindings are almost as strong as you can get. I have them mounted on my Dynastar Legend Pros and Big Troubles. I beat the crap out of them and never have to worry about breakage or prerelease. The elasticity in the heelpiece is what makes look/rossi bindings the best. I'm 6 foot, 190 pounds and I ride these at 11. My salomons are set at 13 and Marker Duke's are at 12 just so they don't prerelease when I land big or way forward. The SAS2 150s give me a chance to recover before releasing, but still release when necessary during a big crash. They are heavy from the all metal construction, but plastic bindings break. If you bust these up, I hope your body is still intact. Now, if they only brought back the turntable in something less than an 18 din. . . .

Was this helpful? (0) (0)

Flag

Has anyone had to stretch the brakes? I want these to go with

Has anyone had to stretch the brakes? I want these to go with my Liberty Helix, but they have a 105 waist.

By:
April 2, 2009

Was this helpful? (0) (0)

Flag

Stretching these brakes to accommodate a 105mm waist is easy-breezy for any shop guy. Damn, you could just wrench 'em with your hands; it's so close. You're in business!

By: Backcountry.com Employee
April 2, 2009

Was this helpful? (0) (0)

Flag

Anyone know if these will use the same holes as a marker m1100?

Anyone know if these will use the same holes as a marker m1100? Or any binding with a higher din that will use the same holes?

By:
March 25, 2009

Was this helpful? (0) (0)

Flag

Definitely different hole patterns. That's a good thing. You don't want to re-use holes. Un uh! You'll pull your binders out on the first day! Go new every time unless you're using heeli coils.

By: Backcountry.com Employee
April 2, 2009

Was this helpful? (0) (0)

Flag

Rossi and Marker use different mounting jigs, so I am pretty sure that they don't. Just take them to a shop, they can redrill and mount for you, no problem.

By:
March 27, 2009

Was this helpful? (0) (0)

Flag

Does this binding work with the K2 Appache Recon mens ski?

Does this binding work with the K2 Appache Recon mens ski?

By:
March 9, 2009

Was this helpful? (0) (0)

Flag

Any ski binding will work on any ski as long as the ski is flat on top and not part of a ski/binding system. Systems will have plastic rails on them. Hope this helps!

By: Backcountry.com Employee
March 9, 2009

Was this helpful? (0) (0)

Flag

does this binding have a high level of steel in its construction?

does this binding have a high level of steel in its construction? as im aware the the look px race 14 does.

By:
November 28, 2008

Was this helpful? (0) (0)

Flag

Yeah dude. They're tanks, way burlier than the 14s.

By:
March 5, 2009

Was this helpful? (2) (0)

Flag

Change me.

Tech Specs:

DIN Range:
8 - 15 
Recommended Skier Weight:
125 – 300lbs 
Brake Width:
100mm 
Weight:
6lb 3oz (2812g) 
Recommended Use:
All-mountain, freeskiing, expert 
Manufacturer Warranty:
2 Years 

Customers Who Bought This Item Also Bought: