We offer Free Shipping on orders over $50 shipped within the contiguous United States...that's the lower 48 to you and me. If your order is received before 5 PM Eastern Standard Time, we will make every effort to get it out the same day. Make sure to take Free Shipping into account when comparing prices.
Free Shipping (Economy) must be selected inside the shopping cart.
We guarantee complete satisfaction and an unlimited lifetime warranty. If at any time - now, next month, in 30 years - you're not 100% satisfied, send your gear back for a full refund. No questions asked. Need help returning an item? - Click Hereclose
Due to contracts with the following brands, we are unable to ship any of their products outside the US.
more...
Int'l Shipping
Backcountry.com uses UPS Worldwide Express or Worldwide Expedited
for all shipping outside the United States. We have found this method to be quick,
secure, and cost effective.
MSR combined their fast-boiling stove with a high-efficiency pot to give you a windproof, fuel-efficient stove system. The Reactor Stove boils one liter of water in under three minutes, so you can enjoy a quick, hot cup of tea in the morning before your ascent. MSR's heat exchanger encloses the radiant burner, providing super-efficient fuel burn, and the Reactor Stove's internal regulator puts out a consistent flame throughout the life of the canister and regardless of gusty winds. The 1.7-liter pot's lid and handle lock in place, and the fuel canister (sold separately) and stove fit inside. *Fuel and fuel bottles sold separately.
Bottom Line: Pack MSR's compact, easy-to-use Reactor Stove system and experience a new world of camping stove efficiency.
This stove is one of the best out there. We used several of these recently on an expedition to Gasherbrum II in Pakistan, and the stove was light weight, fairly compact (you can put other items inside), and high performance. It is easy to use and fast to boil. We used/tested the stove up to about 24,000ft and it got the job done well without being temperamental to cold or to altitude. With a user friendly system and solid base, it boils more water in a quicker time period and sits balanced in snow and unstable ground. This stove is less susceptible to wind and other elements as well, making it extremely reliable and very efficient.
fast boiling stove with high efficiency pot = 3 min boil. tested this out in the north cascades and i was sooo impressed. it's going to be the perfect backcountry ski stove simply because the stove and pot are connected and are one unit so they aren't as effected by the wind and temperature. it's a stable little unit. i love that everything fits inside it too. great great stove.
Though this stove looks like it would work as a tent heater, DON'T DO IT! Most would set the heat to low (this stove burns very hot) which is the worst possible setting because this is where it puts out the most carbon monoxide (carbon monoxide displaces oxygen in the lungs which results in suffocation). The reason is the flame has to get above 3,000 degrees F in order for the heat to bond carbon molecules creating carbon dioxide (harmless gas). Thus, on LOW, the Reactor puts out enough carbon monoxide to be worrisome and is seriously not recommended. Even inside a vestibule you have to make sure you have adequate through ventilation. For the record, MSR strongly recommends not using the Reactor inside an enclosure. It is up to you if you wish to follow this advice or not. If you do, use on HIGH as this will put off more carbon dioxide and less carbon monoxide.
Awesome stove. highly recommended. Melts snow and ice really fast, even at extreme altitude. Used this on K2, at camp 4. Melting snow at nearly 26,000 feet usually takes a very long time. With this stove you'll be hydrating and eating sooner, leaving more time for relaxing and mentally preparing for your send.
Amazing performance most of the time! Drawbacks: 1) Canister performance below 30F sucks. Sleep with your canister in your sleeping bag, or you won't have coffee in the morning. 2) No simmer - if you want to do more than just boil water insanely quickly, look elsewhere. If it had a calibrated knob, it would say "off, 8, 9, 10, 11".
I wonder why MSR did not include auto ignition. That is one sweet thing about the Jet Boil. Getting a bic child proof lighter to work on Rainier in the gusty winds was next to impossible, but the jet boil came through. What is it going to be like trying to light this?
Fortunately there are other methods of lighting a stove without a lighter. I would recommend windproof and waterproof matches (REI branded have worked well for me). I also like the spark lighters like Light My Fire. With the Reactor, all you need is a spark.
The reason why MSR didn't include a auto ignition is for a couple of reasons. One, it simply ISN'T reliable. If the ignitor gets wet, it won't work. They easily break as well. A major worry of MSR's is that people will look to it as their sole way of lighting the stove inwhich it will inevitably fail.
The second reason why MSR won't put it on their stove is that they eventually wear out. Because it would be permanent component on the stove, the thought of it wearing out in a few years doesn't jive with their idea of quality. MSR is working hard on other auto ignition technologies and may have something in the future. However, it is a far better idea and much more reliable to depend on an outside source for ignition.
I don't know what kind of experience the first poster had, but I've had excellent experience with this stove in cold, windy, hi altitude weather. I've used it to melt snow several times this year without any problems. In fact, last week I had this stove in snow at Rocky Mountain National Park at 9000 ft. at 22-degrees F with 30mph winds and still timed the stove boiling a liter at 3 minutes 30 seconds!! This with a half-empty canister! No other canister stove that I've used in the past even comes close to this. For those who want a canister stove that will work in the worst conditions (above 0°F), this is it.
I love this stove and mostly eat dehydrated food but for the price I was excited about the potential for more pots and pans...I contacted MSR and got this response.
Thanks for contacting Cascade Designs. Unfortunately we dont have any plans at the time for alternative cookware for the Reactor. The earliest you could see new cookware would be 2010.
There will be a 2.5 L pot coming out in the not to distant future for the reactor. You can read about it here: http://www.outdoorindustry.org/media.outdoor.php?news_id=5606
Like Kurt Z mentioned in his review ... there is a warning sticker on the pot, containing the same warning information that is attached to the burner (the actual combustion device!) that is impossible to remove without toxic solvents. My first experience with a $160 stove ruined by a $0.25 sticker. I really hope Cascade Designs gets this one sorted out - it pissed the hell out of me, and maybe others?
Haven't really used much yet but is very impressive on first use. The first time you see the stove primed after warmup is incredible and leads you to a "wow, that is badass" moment.
I contacted MSR because I had the same question and here was there answer
We had to elect a permanent adhesive for the warning label to satisfy a variety of requirements, many of which are specific to an integrated stove system, so the label is not intended to be removed. The label itself is a durable, waterproof stock that is very heat- and chemical-resistant, and was tested to withstand a lot of abuse. Unfortunately, we are stuck with the label as it is One of the most stringent regulatory agencies that we deal with is CSA (the Canadian Standards Organization). They explicitly require permanent labeling for certain things. Although the standard was not re-written with the advent of the integrated stove system, we try to be conservative in our interpretation and in our measures to comply.
If you need a hanging stove, try out the Jetboil Hanging Kit for this. It is supposed to work very well, even better than for the jetboil. I have'nt tried but im gonna. Check out this site for info/pictures: http://www.backpackinglight.com/cgi-bin/backpackinglight/xdpy/forum_thread/3779.html
if you are heating water this is the stove, not for the gourmet camper, but that's not what it's designed for, wind is no longer a factor, boiled water in the open at 12,000+ in less than 4 mins, for a whole Liter!!!!!!!!!!
Thanks Jason for your significant insight. Reactor seems technically better but dont like that only works with its pot. Being more specifically I like convenience and ease and would like to use for short backpacking trips(not winter) and camping with girlfriend. Which system (of all) do u recommend.
Short backpacking trips, ease of use, and girlfriend?
buy a remote canister stove, msr wind pro, snow peak bf, brunton vesta, optimus stella, etc.
Don't get me wrong, I like my liquid fuel stove and my ultralight canister top stove, but there is a time and place for everything, and if I owned one stove it would be a remote canister with a fuel preheat coil. Funny that its the one kind I dont have.
oh, I'd buy the snow peak bf, large burner if it was my money
This pot is probably overkill for what you want. This pot is designed to ONLY boil water which limits your options. If you want a more versatile system check out something else.
If you want ease of use, check out canister stoves such as the MSR WindPro or Pocket rocket.
If you want something cheaper in the long term, get a liquid fuel stove such as the Wisperlite.
If you want to cook gourmet meals in the back country and need to regulate heat get the Dragonfly.
Easy to use, impressive power and boil time. Great for when you need hot water fast. I have used this at altitude and in very cold weather with no issues. Others (including jet boil lovers) will be jealous. I wish it had an auto-ignitor however. The pot is big enough for it's intended purpose while the whole unit remains at a manageable weight and size. This this is fool proof.
LOVE THIS STOVE!!!!!! I think it is the best stove on the market it boils one liter of water in just under 3 minutes. also the MSR logo in the middle of the stove when it is lit is a nice addition. the only bad thing weighs 22 ounces.
This is a pretty general question, but I will do my best:-). There are several differences between both these stoves, most noticeably the stove itself. The Jetboil's stove is nothing more than a traditional small canister stove. It is very similar to the Alpine Lite Stove made by Primus. The mere fact that it uses a heat sink on the pot and has incorporated this stove into a system makes it different than other canister stoves. However, it is not 100% wind resistant (needs both primary and secondary air), and it doesn't have anything to regulate the pressure being generated by the canster (meaning it's performance is completely dependent on the weather and amount of fuel in the cansiter). The Jetboil isn't very light either when compared to other sit-on-top canister stoves (weighs in at about 15 oz.). I would recommend the Jetboil for those who want a fairly small, compact stove/pot system who primarily boil water. It does so fairly efficiently and quickly when compared to other stand-alone canister stoves.
The Reactor is entirely different. The only similarity between the Jetboil is that it uses a heat sink on the pot and is also a stove/pot system (meaning no other pot will work on the Reactor other than the included pot). The Reactor's stove is truly innovative in that it uses a pressure regulator (meaning it only needs about 12 psi to obtain optimum heat output compared to 65 psi for every other canister stove including Jetboil). It also needs just primary air (primary air, located below the stove's burner head, is where 60% of the stoves combustion is generated...secondary air, located between the stove's burner head and the bottom of the pot, is where 40% of the stove's combustion occurs...block either of these off and the flame will go out). The Reactor's need for only primary air makes it 100% windproof by allowing the pot to rest directly on the burner head thus protecting the heat output. The Reactor is the only stove that will give you consistent 3 to 3:30 minute boil times per liter in any condition above about 10 degrees. The pot is one of the most innovative pots for heat distribution and efficiency based on its laser-welded heatsink and 'shroud' (the shroud captures any heated air and traps it for a moment to help improve efficiency...the holes around the circumference of the pot allows this hot air to escape-it's also laser-welded on). Just to be clear, the pot has been updated and is now lighter (about 10oz.). The stove weighs in at about 6.5oz. making the complete unit (without fuel) weigh in at about 16.5 oz.
If your interested in sheer performance and efficiency, the Reactor is the stove. If you want a smaller stove system and are willing to give up some performance and efficiency, and plan to only use it for solo use, the Jetboil might be the better option. Remember, the Reactor can boil a liter at a time whereas the Jetboil can only boil 2 cups. Hope this helps....
Fantastic design! Performs like a champ at moderate altitude (9-10,000 ft) & cold conditions (20-30deg F) & strong winds (20-30mph). Very neat and clean design which is hassle free and frustration free to operate and packup- even with your gloves on. Yeah, it has no simmer, but for backpacking food- who cares? We keep around a Whisperlite and skillet for car camping when our cooking gets more ambitious.
Does anyone know why the price of the stove has increased from last year? Its about a 13% increase?? Gear people from Backcountry only have the hypothesis that cost of materials might have gone up? The stove doesn't look like it has changed in any way from last year's version.
The way you can tell whether you have the old pot vs. the new one is how the shroud is welded on. If you notice 6-8 tac welds, then it is the old pot. However, if you see a continuous, very small weld around the circumference of the pot, then it is the new one. Another way to determine old vs. new is the heatsink which will be welded on on the new pot and forged on the old. You're pretty safe in getting a new stove/pot since the last old stove to go out was last year (2008)...
Thanks for the response Jason. Do you know how I would go about figuring out which pot I got if I were to actually go buy the stove (other then weighing the pots)?
The pot has changed. It's now about 3 oz. lighter from last year. Instead of tac welding, it is laser welded making the heatsink lighter. Whenever you lighten something up, but improving performance, gear will always be more expensive.
this stove is amazing for melting snow & boiling water quickly at altitude. idiot-proof to use, as well--just DON'T try to warm up the fuel canister to try to get it to work better when it's cold out (with any stove, for that matter..)! Danger!
I've brought this stove out on mountaineering trips with temps ranging from -10 up. Where as most canister stoves crap out in cold temps, this one still performs well. It's quick. It's easy. And it only boils water. Seriously, this stove isn't designed for gourmet backpacking- don't try to get all Wolf Gang, it's a climbing stove. It melts snow and boils water. That's it.
An add on that would be nice, a hanging system. alittle less CO2, this stove puts out quite a bit. I think 3x the normal amount so be careful.
Love this little wonder of a stove. Used it backpacking in 35 degree foggy windy wet weather. It worked like a champ. First time out of the box, it lit up quickly with no "fire ball". Used with a full pot of ice cold water and it was boiling before I had time to get the coffee out of the backpack. For hikers like me that don't like to fuss with putting stoves together with ice cold hand and just want hot water now, this little beauty is for you. The large pot holds your stove, a canister, your lighter and a few other misc items. Take everything out, screw the fuel canister on the stove, light, and presto- boiling hot water. The stove sips fuel with the quick boil times, you will use less fuel than other canister stoves, less fuel to carry in the backpack, which compensates for the heavier weight of the stove compared to the jet boil. The pot sits very nicely on the stove, with no instability on uneven ground. Easy to use and pour hot water from, thanks to the nifty handle, lid keeper. The clear see-through lid is a nice addition as well. Nicely designed stove. Small draw backs are the over-all weight is a bit heavy, has no simmer capabilities, and the diameter of the pot is a bit small for dipping your bowl or cup in to sterilize. For 2 people on the trail, this is all you will need for your cooking needs.
I'm looking to get into alpine style climbing, is canister or liquid fuel the why to go? Which does better at altitude and in the cold? I heard the liquid fuel does better in the cold because generally speaking the fuel does not freeze. Is this true? What are the pros and cons of each fuel system?
Liquid fuel is much better in the cold because it NEVER freezes. White gas freezes at minus 120-something, I believe. Plus you regulate your own pressure with a liquid fuel stove. Canisters do terribly in cold temperatures, but they are lighter and don't take as long to prime. All in all though, the extra time and weight is better than not having hot food, so go with a liquid fuel stove.-------------The biggest benefit for liquid fuel in cold temperature is that you control the pressure in the fuel bottle. That's it's real advantage. Canisters are dependent on the pressure inside. The great thing about the Reactor is it will work at 0degrees and above. For a canister stove to work at this low of temp is amazing! I've used it several times this winter to melt snow and have been very pleased. It is the best performing canister stove on the market.If you think that you will be in temps below zero you will be better served with a liquid fuel stove.
This stove rocks. There are several things that make this stove better then any other stove on the market. First, the stove is pressure regulated. That takes the fuel can from 65 psi and regulates to about 13 psi. This allows the stove to burn at the same performance all the way through the can. No throwing away cans that are still a half to a third full because you stove stops performing well. Second, the stove is wind proof. With most canister stove if you were in 32 degrees and had a 20 mph wind the stove would never boil. With this stove you will get 3 min boil times everytime. The pot sits about half a cm from the burner, so there is almost no heat loss from this stove. If you are looking for a great winter stove this is the one to look at.
There has been lots of questions about other cookware for the reactor. I have a sample of it and used it for the first time this weekend. It has the exact same performance as the 1.7L pot and is only 3 oz heavier. It has a removable handle ( the same handle on all of the MSR cookware). It has the same kind of lid as the 1.7 L pot. Look for it in early 2010.
H2O boils far faster than the time it takes to rehydrate your freeze-dried food. Stove packs easily, inside the pot, along with MSR's 8oz IsoPro. Minor issue... I'm interested in finding a stuff sack as there seems to be a few rough metal edges on the pot that may catch and possibly damage something in your pack. Otherwise, Highly recommended and I'm very pleased with it's performance in the wind!!!
REACTOR !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! first of all, the curren jetboil has currently been reccalled, because the simmer thingy broke, whose to say that the next step is that they start blowing up, reactor boils water faster, the reactor directs the fuel directly to the stove, so no fuel is lost, and at the very last bit, then the stove turns bad, but with the jetboil, when like 60% is lost, the stove turns bad, and the reactor pot sits directly on top of the stove, so no heat is ever lost, while the jetboil requires a screen, the reactor dosn't. and if you ask any other backcountry expert, they will tell you that the reactor is THE BEST STOVE EVER !!!!!!!!!!!!!
Reactor all the way. There are 3 big advantages to the reactor over the Jet Boil.1. Pressure Regulation- This stove has a pressure regulator that basically allows the stove to use all the fuel in the can and no difference in performance no matter how little fuel is in the can. At the last 4% of fuel the stove performance goes to crap. With a jetboil once you get to the half way point the performance begins to drop significantly2. The stove is wind proof- This is accomplished because the stove is a radiant burner rather then a convective burner stove. This allows the pot to sit almost directly on the burner. There is no heat being lost by the wind coming by and blowing the convective gases away.3. Cold Temp Performance- This is combination of the pressure regulator and the pot sitting directly on the burner. The stove will boil a liter of water in about 3 mins no matter how much wind, how cold it is, or the altitude. As long is the fuel can is not gelled up. People who use this stove a lot will tell you that this is the best winter canister stove on the market.
This thing might be cool in fair weather, but it's not a mountaineers tool. THE CONS: The hype about the pressure regulator making the fuel run more efficiently is total bull. If the canister is sitting in snow, the stove quickly weakens to a whimpy simmer which make snow melt times pathetic. When they say not to use it in a tent, they aren't kidding either, mine belches a 24 inch fireball every time I light it. Don't set the the pot down in the snow or the integrated heat exchanger will be packed with snow. Don't boil over either, the exchanger funnels water (or in my case hot coco) down into the heating element. No auto igniter on these puppies, which might be nice when you don't have a lighter handy. Finally, the actual stove assembly can't be set in the snow either. Getting snow in the element or in the IsoPro fitting makes the stove inoperable. Oh, and Iso is expensive! THE PROS: In warm weather, the stove rages! Mine boils a quart of water in under a minute. The pot is nice and big too. I can fit two Tasty-Bites in mine at a hard boil. The little pac-towl is handy, and the rubber knob on the lid can handle a fair bit of pack crushing. Overall the Reactor is useful for fair weather camping, but when the snow flies, leave it at home.
Don't get your feelings hurt, but not many alpinists I know would put a canister stove directly on the snow. My experience has been that if you prep properly (i.e. use over a pad with or without heat protection) you'll do suprisingly well at high altitude and in low temps.
I own the Reactor stove by MSR and LOVE it. My only problem has been it's preformance in single digit temps. Does anyone know a trick that might help keep the fuel canister from freezing WHILE I am cooking on it?
Except your pot of water will quickly become ice and be just as cold as the air in single digit temps. when you know that it is going to be a cold night, put the stove in you sleeping bag, and in the morning, HOT COFFEE FOR YOU !!!
One thing that might work is sticking the canister in a pot with enough water to cover the canister above the level of the fuel while it's being used (obviously I wouldn't let the water get to close to the Lindal Valve (where the stove connects to the canister)). This will help keep the temp of the fuel up enough as to not effect the vapor output. It's NOT recommended that you use your hands to warm it up. This might cause skin damage. Single digits is about the limit of where the Reactor will work. Most canister stoves won't even function at this temp.
Boils water faster than you can blink. Amazing quality and performance. The heat transfer to the pot will blow your mind and wind can't touch this system. A little pricey but its the best out there.
Tired of dirty pots? Tired of dirty dishes? Tired of cooking with a regular stove in the rain/snow with the wind howling? Tired of lugging around a plate, a bowl and your meal? Want to carry less? Like the idea of freeze dried meal but turned off by the lack of taste?
If you answered YES to any of the above, then you my friend need to stop dorking around, get a MSR Reactor and start cooking FBC meals. (Freezer bag cooking).
TO REMOVE STICKERS: Use paint or laquer thinner to remove the sticker's glue, it's about the only thing that works.
This stove is only designed to boil water and that's what it does perfectly. It is almost too fast at melting water because once you add an inch or so of water and start the stove up, you have to get snow in the pot ASAP because the water boils instantly.
In high winds the stove is amazing as well. I was making tea at 2 am before we started up Mt Baker and even in the darkness, high wind and pelting rain, you could only see the slight glow of the heat in the pot vents and the steam rising from the top. Needless to say we waited till 6 to start and making the tea was pointless, it performed perfectly.
Hi, I contacted the MSR Store, and here is what they had to say about the sticker
We had to elect a permanent adhesive for the warning label to satisfy a variety of requirements, many of which are specific to an integrated stove system, so the label is not intended to be removed. The label itself is a durable, waterproof stock that is very heat- and chemical-resistant, and was tested to withstand a lot of abuse. Unfortunately, we are stuck with the label as it is One of the most stringent regulatory agencies that we deal with is CSA (the Canadian Standards Organization). They explicitly require permanent labeling for certain things. Although the standard was not re-written with the advent of the integrated stove system, we try to be conservative in our interpretation and in our measures to comply.
the stove works as a system which means you are limited to whatever you can put in the pot. no pans or such....--------This stoves primary purpose is to boil water fast in bad weather. In fact, it's one of the best stoves on the market for efficiency (how much fuel it uses per liter of water boiled), speed (boils water at 3 minutes per liter in any weather condition above 0 degrees), and weatherproofness (100% windproof). However, if you're wanting to cook more traditionally like you would at home, this isn't the best stove. It's design does not really warrant itself to gourmet cooking. It can simmer, but it really only has a medium and high setting. I would recommend the MSR WindPro for this style of cooking. It also works very well in adverse weather conditions, but it has the ability for the user to use any type of pot, to simmer at any level, and is lighter and more compact.
Got my reactor recently and used it last weekend in Shenandoah. This thing is an absolute ROCKET. As promised I had a liter of water ready for dinner in about 3 minutes (I didn't bother to time it, but it was fast) and was soon enjoying(?) my unseasoned chicken, corn, and rice. Water for coffee in the morning came quickly as well - so no complaints here. Turn on the stove and it lights easily with a lighter or match. It just takes a few seconds to heat up before it's ready to rock. I've read complaints about it not having an auto ignition feature, but I've never had much luck with those systems. Just make sure you have a windproof lighter/sparker/etc. if you're spending time at exposed sites. I'll add something about cold weather performance once winter rolls around.
The Reactor packs nicely into the pot along with a lighter and fuel canister (but the 8 oz isopro makes for a tight fit if you insist on keeping the cap on it). The whole system fits nicely into a pack as long as you've got enough room for a 1.5 L pot.
It's not the most versatile stove and it's not for gourmet cooking. It is what it is... an 18 oz. stove system for people who like to get up and go without burning through too much fuel. If you want to play gourmet chef in the backcounrty go with the Dragonfly. The pot is a little small for more than 2 or 3 people, but a larger pot is coming soon.
Boils 16 oz. water in 150 seconds at 25 deg. in michigan. my first stove, looked at jet boil but fuel containes for jet boil limited. and hard to find can use other but doesnt pack in itself so opted for the reactor. glad I did. what a stove.
This was the fastest boil time I've ever seen. The build and design is flawless. The weight is standard for something like this where reliability and performance are must haves. I would take this above any 14K environment and feel safe.
I loved the concept of the Jetboil but it tended to lack performance after 1/2 of the canister was gone, and the small burner tended to burn whatever was inside to a quarter sized char spot in the center of the cup.
I got a Reactor in late 2007 (before the pot redesign) and have not looked back. It is heavier but much more useful. The capacity is perfect for almost anything I've tried to make in it. I do tend towards simplicity, i.e. things that cook in boiling water which is exactly what this was designed for. At first I missed the auto igniter from the Jetboil but the rather lo tech Mini-Bic lighter fits well inside the packed stove. The anodized interior coating is much more nonstick than the Jetboil and the burner surface is about as large as the pot itself. However you need to be diligent with the stirring as this stove doesn't seem to have a simmer setting.
I am very impressed with the performance in the wind. I have never had it blow out while cooking and if you're interested the stove (w/o pot) stayed lit when held out a car window until about 28 MPH.
The stove packs best with the MSR canister, I have used the similar sized Snow Peak and Coleman canisters and they are a bit shorter and therefore let the contents rattle a bit. Then again you could always fill that gap with by folding the supplied packtowel square.
The controls are easily operated even with gloves on, but then again it's not like you can regulate the temp much. Realistic temps range from really hot to really hot +1 (Nigel would say it's one hotter). The small vent hole in the lid can work as a really slow pasta drainer and the rubber handle stays nice and cool.
Occasionally the stove will take a while to fully light (once the bottom surface gets orange) and I have yet to figure out what causes this but it is of little concern. The logo on the stove surface is a neat little touch.
My stove has boiled a half pot of water in udner a minute, no joke. My friend has a jetboil and we went head to head on fastest boiltime and MSR won. Packs neatly and is fairly light. Not good for slow cooked meals, this thing goes from hot to hotter.
I'd been waiting for this to hit shelves for about 8 months.. finally got one when they broke this past September. It is everything I hoped it would be: fast and light. Okay, it's not a featherweight, but.. for what it does, I'm content with weight. I used to wait 10 minutes for a cup and a half of water to boil with the SnowPeak Giga-Power .. and my two buddies would wait even longer with their wal-mart specials.. but now I'm boiling a liter of water in 3 minutes, and so we're all eating in 10-15, rather 25-45. Can't wait to try this puppy at altitude next fall on Long's Peak.
YES!!! MSR designed it to shine above 12,000 feet. It doesn't require much pressure to operate well, so it also works well in cold weather. check out http://www.msrgear.com/stoves/reactor.asp and click on the link on the right side that says, "more on the reactor stove's revolutionary technology"Tweak: This is NOT A MOUNTAINEERING STOVE. If by altitude you mean high or very high altitude(from 12,000 feet up) or are planning to use it in severe cold conditions(-20F and below) I'd rather stick to a liquid fuel stove, fuel itself behaves a lot better on such conditions than isobutane canisters, no pressure or temperature problems. Personally I use an MSR Whisperlite, simple, tough and HOT. You can find some examples on the review "NO GO IN SNOW!!" down below.Canister stoves are effected more by cold than by elevation/"altitude."
Used this for 4 day Emmons, stayed at Emmons flats. Melted/boiled a lot of snow. Worked perfect. No temperature issues but it didn't get below 29 F while we used it. Used every last lick of gas in the canisters. We set it on a pad to keep the canister from welding itself to the snow. For 3 persons, melted/boiled snow for cooking/drinking for 3 days and used exactly 1 small and one large canister with a couple drips to spare. At the end we were just melting and not boiling. Should have brought an extra canister with us. I'd say a small can will supply 3 persons for one day and nothing more if you are melting snow. If you are having temperature issues make sure you are using isobutane and not just butane.
I bought the small jetboil and this, used them both at home before leaving - the jetboil is not even in the MSR's league. Don't buy a jetboil unless you just wanna make coffee. You can feed people with the MSR Reactor.
This stove slays any other. You can boil 1 litre of water in less than 2 minutes. Unless at high altitudes obviously. I had my potatoes so quickly after hiking, it was a lifesaver. So light minus the fuel, but well worth it. The MSR symbol shows up when lit it, which is a nice touch. You will not be disappointed if you have this.
I bought an MSR Reactor and it's working very nicely. I don't really know if the advertised boiling times are accurate or not, but it is effective in fighting crime. I'm using it as a compact handheld blow torch: part of my superhero kit. I've almost tweaked it so that I can throw fire-balls, a la Super Mario Brothers.
Comment on Kim Havell's review >