We offer Free Shipping on orders over $50 shipped within the contiguous United States...that's the lower 48 to you and me. If your order is received before 5 PM Eastern Standard Time, we will make every effort to get it out the same day. Make sure to take Free Shipping into account when comparing prices.
Free Shipping (Economy) must be selected inside the shopping cart.
We guarantee complete satisfaction and an unlimited lifetime warranty. If at any time - now, next month, in 30 years - you're not 100% satisfied, send your gear back for a full refund. No questions asked. Need help returning an item? - Click Hereclose
Due to contracts with the following brands, we are unable to ship any of their products outside the US.
more...
Int'l Shipping
Backcountry.com uses UPS Worldwide Express or Worldwide Expedited
for all shipping outside the United States. We have found this method to be quick,
secure, and cost effective.
The Mountain Hardwear Men's Beryllium Jacket provides you with the articulated cut, waterproof fabric, and wicking properties you need for a multi-pitch ice climb. Mountain Hardwear's extremely durable, lightweight FTX Lite face fabric combines with Gore-Tex Pro Shell for bombproof abrasion and weather resistance. The Micro-Grid Backer wicks moisture on that gnarly second pitch, and the micro chamois-lined collar eliminates chin irritation. When you reach a belay station, unzip the pit vents and let off some steam. The Beryllium Jacket's hand pockets stay accessible when you wear a harness, and an inner water bottle pocket keeps you hydrated on the ascent. The single-pull hood cord quickly seals out cold while your other hand stays on your ice tools.
Bottom Line: Cross glaciers and climb ice falls in the Mountain Hardwear Men's Beryllium Jacket.
I've used the Marmot Exum shell and this Beryllium and I'd choose the Exum in a heartbeat for a few reasons. The soft fabric around your chin when you zip up all the way is much softer and much more ample on the Marmot. Point #2: The hood IS helmet compatible but if you're not using a helmet it's near impossible to keep the hood up. The adjustments really didn't do the trick for me. Point #3: The zipper is not water proof or water resistant. It does have a dual layer flap that goes over the zipper to keep the water out but because the flaps are there, the zipper catches. EVERY TIME... for me at least.
Hope this helps, but I returned it and I'm going with Marmot.
The Beryillium is intended to be more of a climbing jacket, but I love it for backcountry skiing as it has perfect pockets, a nice set of features (without having too many) and the material is excellent. It has a nice loose fit which works well for hiking and helps make it breathable. I was skeptical at first about the lightweight fabric (Pro Shell), but am now sold on it - it breathes well and is durable. The hood is also very well designed and can be used with a helmet or folded back for use with a regular hat.
I'm 6'3" and about 200lbs and I'm debating between the L and XL. I'll need layering for ice climbing or skiing, but I'd like to be able to use it as a rain coat without feeling swallowed. What might be the best fit?
Bryant. You will probably be the most comfortable in an XL. A large will probably fit but when you start layering underneath it I think you'll find it a little tight... so, XL it is. Hope this helps!
Have since added ice climbing and a 6 day Wapta Icefield traverse to this jacket's resume, and can now speak to how it performs during its intended usage: Exceptional! My early durability concerns have proven unfounded, as I have beat this thing senseless this winter, crashing into trees, catching it on crampon spikes (although not razor sharp ones), stuffing it into packs beside gouged shovel blades - it holds up. It is now a filthy brown rather than the bright orange at time of purchase (stains easily), but keeps me just as dry as ever. It dries out very quickly from body heat or when hanging in the hut/tent. The hood is beautiful - the one draw string system works fabulously, the brim stiffener actually keeps water away from your face while maintaining good visibility, and it rolls away snugly. The pockets are great, and the Micro-Grid liner is comfortable. As stated in my previous review, the only complaint is that the "roomy all-mountain cut" is not quite as roomy as expected. A fantastic piece of gear.
The warmth of this jacket would be managed by the layers you put underneath it. As mentioned below, the Beryillium Jacket and the Escape Jacket are both shells made with fabrics from Gore. The Beryillium is made with a Gore Proshell fabric (extremely durable and light) and the Escape Jacket is made with Gore Performance Shell Fabric for more general use (Rain, Ski, Hike etc.) Hope this helps!
They are both similar in the warmth aspect, but keep in mind they are both just outer shells and are only good by them selves to about 40 degrees. The Beryllium is just made out of a better and liter material for less weight, hints the extra 200$.
So I'm debating between the Typhoon Jacket and the Beryllium Jacket. I'm looking for something I can use in the summertime for mountain bike riding and hiking. In the winter I am thinking I would definitely use the Beryllium Jacket for snowboarding/skiing. My real question is: is the Beryllium Jacket lightweight and breathable enough to use a rain shell in the summer with temperatures going into the 90s.
I bought this coat being unable to find one in a retail store to try it on for fit first. After trying on similar style Arc'Teryx coats, I decided small was the size for me - but the Beryllium is cut noticeably smaller than the A'T small, especially in the sleeves. Kept the small, but could've done with a medium. This coat has a beautifully designed hood, has kept me dry and snow free in over 25 days at Whistler this winter, as well as walking the dog for hours in heavy downpour in Squamish, and sweaty, heavy touring days. The only thing I would say is if you're primarily buying this shell for resort skiing, you might want a heavier one. Gets quite chilly in wind or on the chairlift, and small cut does not allow me to wear a down layer underneat.
Also, does anyone have the green flash colour? I can't find it in stores around here and would be keen to see a photo of what it actually looks like on (as opposed to the stock photo). Thanks...
I went back and forth between the ARC'TERYX Theta AR, OR Mentor and this jacket for a few weeks. I ended up going with the Beryllium mainly because I got a good deal on it. Overall I like the jacket a lot and it will suit my demands for the next couple years (14er Mountaineering, US Alpine Climbing, Ski Touring, PNW Backpacking, everyday abuse). The fit is good and as expected, I'm 6'0 155 skinny-med build. I wear a MED is every brand of outdoor clothing and the size medium fits great, sleeves are a little long (even for overhead reaching, climbing) but it's not to bad and I see this with almost all shells. I love the hood, helmet compatible, one hand drawchord works awesome. Jacket has a drawchord about a quarter the way up the bottom of the jacket (similar to where a snowskirt would be), I'm not exactly sure the idea behind that but I guess while alpine/rock climbing you could make it tight and leave the bottom drawchord loose so that it lays over your harness. I played around with it and donât see the jacket gaining much from it. The only other thing I really don't like about this jacket is the double flap front zip. Waterproof zippers have proven their durability over the years and everyone has moved them so I'm a little confused why Mtn Hrdwr went with the old school design in that area. I also would have liked to see some reinforced material on shoulders/sleeves. Used the jacket in the rain and in heavy snow and it performs excellent as you would expect; GORE TEX PRO is the best out there. I think the Theta AR and Mentor are burlier jackets overall and for the same price I would pick one of the other mentioned. That being said this is a great jacket that I anticipate getting years of good use out of, I have no concerns using it on my winter mountaineering trips!
I'm thinking of getting this jacket and was wondering in terms of a layering system, should this go on the outside or inside of a light/med weight down jacket? I figure that if I went for the MH Phantom, the jacket could fit inside, but if I went for a Feathered Friends Volant jacket then it'd go on top of the Beryllium. Correct?
Depending on how you are using your jacket you could layer it either way. For example, if you were ice climbing and you had your down jacket in your pack (it would be to warm to climb) and were climbing with the shell... you could layer the down over the shell at belays. If you were backcountry skiing and skinning up a skin track and the down jacket was in your pack (to warm to skin) then at the top throw the down over your shell while you sipped your tea before dropping in. So, there are two examples of how to layer the down over the shell. If you were going to layer it under your shell... it better be really cold. Skiing on ski areas you might encounter conditions that would warrant this kind of use but again it would have to be really cold to layer it under your shell jacket. Hunting you might encounter this kind of cold as well. But, if you are active... layering it over your shell during breaks will probably be how you use it the most. And both the Volant and/or the Phantom would work in this way. Hope this helps!
I bought this for adventure racing. After comparing all of the features it came down to this or the Arc'teryx. I haven't tried the other one but I see no need.
Exceptionally packable, breathes well, fits right, lot's of pockets, pit zips and don't forget WATERPROOF!
How does the beryllium compare to the Terra Shell? Is one gonna be more durable than the other? i know that the Terra Shell is light but is it tuff too?
This one does have the pro shell goretex so its 100 pct wind and water proof -----------------------The Beryllium Jacket is made utilizing Pro Shell from GoreTex. Extremely durable and waterproof and breatheable. The Terra Shell is made using Conduit and is welded together. It is also completely waterproof and breathable. Both are phenomenal shells and both are waterproof and breathable. In my opinion the Beryllium will be more durable than the Terra Shell. The Terra Shell will be more breathable. I have been abusing a Terra Shell for an entire season and have not experienced any durability issues. Don't know how you are going to use your shell... but, I would say it is tough enough.
This jacket is billed as a VERY expensive Ice Climbing or Alpine Climbing jacket. Thats why I bought it. I haven't found a jacket that was well built and performed well. My search continues. I think I'm heading to Arc'teryx next. I bought this jacket after viewing the Mountain Hardwear website and seeing the pics of people climbing in it. They must have only used it once. I could rave about the jackets comfort or how it kept me dry and warm in the teens when I started my route or how much I love the bill on the hood, pockets, etc. The problem is that this jacket just isn't durable enough. I wore it one time and the front tore from being rubbed on a rock. This happens when you climb mixed. It's gotta be more durable. When I contacted customer noservice to see about having the jacket repaired it was like I was being handled by a robot. Because of my treatment I refuse to even buy MH products from an REI scratch and dent sale.
I'm 6'4" but only 160lbs. Tall and skinny. Will this jacket work in the Large? I'm always afraid of XL's because they are usually way to wide on me. Any suggestions?
If you have long legs and a shorter torso then this jacket in a large could work fine. You might have an issue with the arm length but I am guessing that this is not the first time you have run into this conundrum eh? I imagine the XL would indeed be to wide. Good luck!
This jacket preforms perfectly for what it was intended for...mountaineering, not skiing or boarding, really if your riding the lifts you don't need a $400 hardshell. Lightweight and packable yet surprisingly durable. Really who wants to haul a two pound "more durable" hardshell 20 miles to the mountain before putting it on, I most certainly don't. You can't go fast without going light. It keeps winter at bay, whether its heavy spring snow or windblown powder. Since I wear my down summit parka over it (as you should), its a bit baggy but fits decent compared to other brands. If only they made hardshells in talls...Pro-shell is the best Gore-tex yet, by leaps and bounds. Being a dirtbag climber it was a bit expensive, but better than any other hardshell out there for year-round climbing in the North Cascades.
They are similar jackets. Both are Gore Proshell. The Alpinist weighs 1.46lbs and the Beryllium weighs 1.2lbs.. The Alpinist has a removable powder skirt. The Beryllium does not. The Beryllium utilizes the 8mm "tiny tape" throughout the jacket. I am not sure if the Alpinist does or not. The Beryllium is made in China. The Alpinist is made, according to another answer, in Vietnam. Both jackets will undoubtedly get the job done while mountaineering. Hope this info helps!
I gave my MH Beryllium a good workout this week in Breckenridge and Beaver Creek. We expected warm spring skiing and got pounded with snow and wind. The jacket performed well and I had one of the best powder days of my life in it.
I like this jacked, but as a skier I think I would have been better with the MH Vertical. I missed having a powder skirt. I skied comfortably in the hood during the toughest conditions, however itâs not totally helmet compatible I couldnât zip the jacket fully. Also, the top of the zipper did cause me some chin irritation. I think that jackets with an offset zipper are a better design.
My take, I really like the jacket a lot. I just donât love it like I should for a $475 jacket.
The beryllium has a double flap front zip closure, whereas the argon has a watertight front zip. Both jackets are taped, have an FTX proshell body, and use proshell gore-tex laminate. The argon is a bit slimmer-fitting, I believe. And they are about the same weight (1 oz. difference), same length...very similar overall. ----------------------------------------All that is correct. The fit is the biggest difference-Argon slimmer, Beryllium more general. I would also add that the Beryllium has one more pocket on the chest than the Argon. Both jackets utilize the 'tiny tape' from Gore which is 8mm and I would put these jackets up against any Proshell on the market! They are gorgeous. Cheers!
Skiing, hiking, fishing, ... in very cold or wet weather or simply walking in the street, you can do anything with this jacket. A little longer in the back and it would be perfect.
Wore it last season in the French Alps. Packs small, keeps you dry, can wear the hood with a Helmet (Grivel), easy access to the pockets when wearing a harness or day sac, can vent off. The fit is also good as you can wear multi layers and it doesn't feel too tight. Great Jacket!!!
I have a Mountain Hardware Soft shell conduit jacket, And love it, I was wondering what the closest thing to that jacket is. I hav been unable to find another and was courios if they even still make this jacket?
The Synchro Jacket or Hooded Synchro Ski jacket both use the Conduit Softshell fabric. Also, the G50 jacket uses the Conduit Softshell fabric as well but it is not taped. All three of these jackets you can find on Backcountry.com's website. Good luck! Hope this helps.
My Beryllium was a very good investment. I'm 5'9" and 42" chest so went with the large. It fits great, no moisture and because the wind can't cut it i need only one light fleece to stay warm. Lots of movement in arms for reaching. Lots of room in the hood for a helmet and tucks away nice to keep wind off my neck. Super light, like Kevlar in many ways. I love it! Bombproof!
I'm considering this jacket but I cant find one to take a look at, my only concern is the strength of the material. I know the Arc' Teryx Theta SV uses 480N and the AR uses 380N with some 480N in places like the shoulders. Does anyone know the density of the Beryllium? Would it compare more to the SV or the AR. I have a Gore PACLITE jacket for general trips but I want jacket that can handle the Alaskan Range without a blink of the eye. Thanks!
It has a denier of 40 for the face fabric. You may want to have something with a heavier denier to be fully bomb proof. Maybe 70 or so. Hope this helps.--------------------The Beryllium utilizes 70D FTX on the shoulders and wear areas and 40D FTX on the body. Again, it is a combo of 70D and 40D fabrics. Just to clarify...
with proper layering this shell performs very well. I have used this shell in the Adirondack mountains in very severe weather and it performs very well. would recommend this to any serious hiker or alpine climber
This is more durable. The Xenon uses Gore Paclite which is lighter than the FTX Pro Shell used in the Beryllium. Basically, they're both light weight high performance shells, but the Xenon is lighter and the Beryllium is tougher.--------------------------------Almost. Traditionally Paclite is coupled with lightweight shell fabrics and therefore is lighter. In the Xenon's case, Paclite is coupled with a completely 70 D shell that is as tough as shells come. Proshell is typically made with a 40 D shell... the Beryllium is a combo of 70 (shoulders) and 40 D (body) fabrics (70 D is burlier than 40 D). Both jackets are super tough and both jackets are waterproof and breathable. We just got there in two different ways. The Beryllium weighs 18oz. The Xenon weighs 19oz. ONE OUNCE heavier than the Beryllium... things to keep in mind!:)
If Berrylium were an ice-cream flavour - it'd be the sweetest thing to smother your insides. But it's not - so the sweetest thing to do is get one on your back. I'm 5'9" 175#, the small size fits me great for ALPINE (such awesome stuff) summer in the super fickle maritime alps of New Zealand. Throw a solid over-sized belay jacket on to prevent chill'n whilst chill'n in the Fall/Winter, and you'll be set (comfortably, not frozen)
Yes, it is totally windproof and waterproof. Yes, the hood comfortably fits the helmets I use whilst wearing a head lamp: Petzl Meteor and Elios, BD Half Dome. The chest zips are not confused when wearing my MH Supernatural and Direttissima backpacks.
The sleeves are in fact long enough for high-sticking reaches on rock for desperate pull-down glory. Throw long gauntlet gloves on your mitts for quality ice time.
I went the red jacket because red is faster. However, given the great look of this jacket, smash it with mud first if you want to be taken seriously in the outdoors.
How does the Beryllium compare to the Arc'teryx Theta in length? THis is what I like about the Theta, it protects my buttocks... Is the Beryllium cut shorter?
The 'Center Back Length' on the Beryllium is 29.5". This measurement is from the seam at the base of the hood to the bottom of the jacket. I am not sure the length on the Theta but I do know that the Beryllium was cut a little longer to accommodate wearing a harness over the jacket while climbing... Hope this helps
Comment on Mark's review >