Like wielding Thor's hammer.
Electrify your off-piste riding experience with the directional shape and added stability of the Nitro Thunder Splitboard. As Nitro's first foray into crafting split boards, the Thunder splitboard was designed to excel at climbing and riding down steep, gnarly chutes and open backcountry bowls alike. Pre-drilled inserts accommodate the industry-standard Voile splitboard binding interface or other split-specific binding systems. Binding mounting hardware and clips aren't included.
This all-mountain, mid-wide split board has a medium-stiff flex that gives you enough support for charging a wide variety of backcountry terrain, but has enough flex for playing around on mellow terrain. A standard camber profile gives gimmick-free edge grip and response, while a directional shape provides ample float courtesy of a one-inch stance setback. Loaded with Nitro's Powerlite core, this snowboard has an ultra-lightweight feel, spring-loaded pop, and long-lasting durability, courtesy of a high-grade poplar composition. Smooth-flexing Bi-Lite laminates cross in 90 degree directions for unrivaled strength. The super-hard and highly porous Speed Formula HD sintered base is ideal for maintaining maximum speed and resisting damage from unmarked obstacles.
- Standard camber
- Directional shape, 1-inch setback
- Mid-wide waist width
- Medium-stiff flex: 7/10
- Powerlite core: ultra-lightweight poplar wood
- Bi-Lite laminates: biax fiberglass layup
- Speed Formula High Definition base
- Mounting hardware or clips not included
Share your thoughts
Are the holes for the board + tip/tail...
Are the holes for the board + tip/tail clips already predrilled on this board?
Thanks for your question.
There are no predrilled holes for the skin tip/tail clips. They are not needed either. You can purchase the G3 Alpinist Splitboard Skins which have adjusting heads on them to get a perfect fit to the tip and tail of your splitboard. I have pasted a link at the bottom here, I would definitely check them out they would pair very nicely with this splitboard.
Ok thanks . I was interested if the holes were predrilled for installing voile or karakoram hooks to hold the board together. The description above mentioned that the clips were not included