Detail Images

  • Nikwax - TX Direct Spray-On - One Color

Current Color

  • Nikwax - TX Direct Spray-On - One Color

Nikwax TX Direct Spray-On

$14.50 - $21.50

Free 2-Day shipping on orders over $50*

Select your style & size:

Select options
  • Select options
    • One Color, 10oz
      $14.50
    • One Color, 16.9oz
      $21.50
    4.5516

    16 Reviews

    Details

    Spray it on, wipe it off, get your tail out there, and have fun.

    Gore-Tex, HyVent, eVent, and any other synthetic fiber garment with a durable water repellent (DWR) or polyurethane (PU) coating will eventually allow moisture to seep through the outer fabric. The Nikwax TX Direct Spray-On is a quick and easy way to replenish that waterproof barrier before your next outing. Simply spray on, wipe off any excess, and allow to dry to reinstate that barrier.
    • Item #NIK0076

    Tech Specs

    Volume
    10 fl oz
    Recommended Use
    garments with a DWR treatment or PU coating

    Tech Specs

    • Reviews
    • Q & A

    What do you think about this product?

    Have questions about this product?

    Don't follow the included instructions.!

    • Familiarity: I've put it through the wringer

    Here is the modified instructions that has yielded me way better results.

    Soak your gear in Tech wash for several hours, especially if you used it enough for the DWR to be rubbed off and needs to be replenished.

    Rinse and dry thoroughly.

    Lay flat, and make sure you don't get it on hard floors (will make the area feel slippery for weeks.)

    Spray as evenly on the garment as you can, better too much than too little. Spread it with a clean damp/wet clothe making sure you get it on high wear areas.

    Let it dry for several minutes, test by running under a faucet, going over the areas you missed.

    Other notes: If your jacket or any garment you intend to use this on isn't waterproof, this will NOT make it waterproof!
    Seriously, if water is making it through your rain gear or garment, this isn't the solution!

    For course threaded fabrics that are used on packs and such, two coats is usually required.

    Nikwax Does it Again!

    • Familiarity: I've used it several times

    I normally use the wash-in version of this, but I decided to try the spray-on this time around, and it worked every bit as well! This works best when you use Nikwax Tech Wash on your hard shell first, which strips any grime and oils off of the fabric. Then just spray on the TX-Direct to reapply the DWR (Durable Water Repellant) coating that causes water to bead up and shed off of the fabric. This keeps water from pooling or soaking into the fabric and enables your jacket to breathe the way it is designed to. I use Tech Wash and TX-Direct on all of my Gore-Tex outerwear a couple of times a year and it keeps everything looking like new! A must-do if you want to the the most out of your expensive waterproof garments!

    meh

    • Familiarity: I've used it several times

    Followed the instructions to renew waterproofing of my rain jacket. I didnt notice much of a difference- it's gortex so it doesnt leak per se but still soaks up water. Maybe it needs a few applications.

    Works but expensive.

    • Familiarity: I've used it several times

    This stuff does work when you follow the directions. I use it when I cannot use the wash-in with like my backpack or just spot treatments on my raingear.

    However, this stuff is pretty expensive and sometimes requires two coats for courser fabrics that are often used for backpacks. That can add up quick! (-1 star)
    It won't make anything waterproof, just more resistant to water sitting on your gear.

    Also, avoid using on hard floors, it can make the floor slippery. You don't want to slip and die, cause that would be very bad.

    I wish they sold larger bottles of the spray on for a better bang for the buck. Or some refill for these small bottles. (10oz)

    Restores DWR well

    • Familiarity: I've put it through the wringer

    Follow the directions and the TX Spray on works effectively. I use a wet rag to spread the coat once it's been sprayed on and seems to work the product into the garment nicely. A bit expensive but it's better than buying a new shell.

    use it on all my waterproof gear

    • Familiarity: I've put it through the wringer

    after using this, my gear repels water like crazy. the spray has a bit of a smell that fades after a few days. (Not a terrible smell, just kind of synthetic, like when you buy new gear.) After spraying on, i usually rub it in with a rag until the jacket/etc looks "wet." That way I know it's really sunk in.

    Nikwax.

    • Familiarity: I've used it several times

    This stuff is great. It is super easy to apply and extremely effective. It is nice knowing that you can go out all day and snowboard/ski/snowmobile/snowshoe or any other potentially wet winter activity, and be kept dry. Any water repellant material will be maximized with this stuff. I used it last weekend where there was a ton of wet snow on the chairlifts and I didn't get wet at all. I would definitely recommend this stuff. It is relatively cheap for what you get out of it, great value.

    Like the wax on your 1976 Ford Bronco

    • Familiarity: I've used it several times

    You wouldn't detail your Bronco with a fine tooth comb then not put a fresh coat of wax on it. Treat your Gore-Tex with the same love and care. Use the Tech Wash in the machine, spritz then on after, while the item is still wet/damp. Then, getting some face shots and repeat as necessary.

    Spray on vs. Wash in

    • Familiarity: I've put it through the wringer

    Follow the instructions, washing first is important. It doesn't have to be like new but you have to wash out any spills, hand grease, or anything else that has built up on your coat. I've used the wash in and the spray on many times. Both work very good, but you can do multiple coats w/ the spray on. In really wet weather the multiple coats of the spray on will give you the best waterproofing for your coat. The wash in can be used once w/ one or two garments and must be used all at once. The spray on does about 2-3 garments, and you have a lot more control. You can apply heavier in areas like the cuffs, shoulders, etc.

    Does the Job

    • Familiarity: I've put it through the wringer

    Quick and easy to apply, and it does the trick. You can definitely tell the difference when you spray this stuff on! Great for when you don't have a lot of time to deal with revitalizing your pants/jacket. I would definitely recommend this stuff- keep it on hand!

    Great in a pinch!

    • Familiarity: I've put it through the wringer

    If you ever need to spot treat just a few places on your jacket or pants, this is the go to product for you. It's quicker and easier than the full tech wash and wash in style nikwax and dries quicker so that you can use your gear with minimal time in between application and heading out to whatever wet activity you're planning on getting yourself into.



    I always have a bottle of this on hand for those "just in case" times of need. Superb for high friction spots such as between the legs, underarms, elbows, and knees. Highly recommended.

    Can the spray on be used after the jacket has been washed and dried? Or is it better to apply the spray when the jacket is wet/damp?

    It's best to wash the article(s) whose water repellency you want to renew with, Nikwax says, their Tech Wash - perhaps that's a good idea, since other detergents can potentially clog the pores between fibers that you're looking to waterproof. Then, their instructions are as follows:

    "For best results remove all non-washable parts and always clean item(s) first with Nikwax Tech Wash®. No need to dry item(s) before waterproofing.

    Protect working surface and lay clean garment flat and zip up all zippers.

    Hold bottle 15 cm/6 inches away from garment.

    Apply evenly to outside of fabric.

    Wait for 2 minutes. Remove any surplus product with a damp cloth.

    Check carefully to ensure no areas have been missed.

    After several minutes check for and remove any surplus product with a damp cloth."

    Therefore, you should wash your article(s), then while it's damp, just take it outside and hang it on something, spray it down, make sure to gently remove any surplus, and then let it air dry the rest of the way, and you should be good to go.

    Hope this helped.

    I bought this product for my new backcountry.com cottonwood gloves. Will it work for the leather or should I return it and get the Creme (link)? - http://www.backcountry.com/nikwax-creme-waterproofing-wax-for-leather

    Can you use this on gloves too? (ex....

    Can you use this on gloves too? (ex. Kinco)

    Can I use this on a soft shell? I have...

    Can I use this on a soft shell?

    I have gotten conflicting answers from people I don't really trust. So I'll ask strangers.

    I'd rather get one product that I can use on everything?

    HOW MUCH NIKWAX DOES IT TAKE TO TREAT...

    HOW MUCH NIKWAX DOES IT TAKE TO TREAT A 20 BY 20 CANVAS TARP ? ALSO HOW LONG DOES THE TREATMENT LAST. SHOULD BOTH SIDES BE TREATED ?

    JIM GRUBBS jmngny@tds.net



    You will need quite a few bottles. This will cover one, maybe two jackets. For such a large piece of material, you may want to look at an alternative product designed for larger items. Otherwise it will be incredibly expensive.