- Home
- Men's Clothing
- Men's Jackets
- Men's Synthetic Insulation Jackets
- Mountain Hardwear Compressor PL Insulated Hooded Jacket - Men's - 2010
Community Rating
Mountain Hardwear Compressor PL Insulated Hooded Jacket - Men's - 2010 BCS
Available Colors / Styles
Mountain Hardwear engineers designed the Men\222s Compressor PL Insulated Hooded Jacket to keep your core-temperature from dropping during your high alpine pursuits. Eco-friendly insulation is placed strategically throughout the jacket to maximize warmth and breathability. The lightweight PrimaLoft Eco is heavy around the core and light through the sides so you stay warm where it counts without overheating. Pockets have been set high and out of the way from harness and pack straps so you gain easy access to them while in the middle of some technical maneuvering. Water-resistant, exceptionally warm, easy to layer under, and highly compressible\227the Compressor PL is begging to come along on your next expedition into the unknown.
Bottom Line: Taste the peak of performance.
Talk shop with all the gear freaks out there: ask 'em questions, upload/browse photos, and give your 2¢.
Right now I'm trying to compare this to the Montbell Thermawrap
Right now I'm trying to compare this to the Montbell Thermawrap Pro. They seem pretty similar. I like a lot about the MH Compressor but I'm turned off by all the reports of how thin/fragile it is. The Thermawrap Pro looks like it might be a little bulkier though. Is it? This could be a problem in layering. The Thermawrap Pro claims to pack down to 5.7" x 10.5". How does that compare to the MH Compressor and do you think I could get it smaller than that with a good compression sack? I need a hooded insulated jacket that packs fairly small and is to be worn either as a top layer or under my rain shell on extra cold days on the trail or while hanging out around camp. Also, if you can point me toward a review of the Montbell Thermawrap Pro I would be indebted. It being new reviews have been hard to find. I would appreciate any help. Thanks ~Paul
By: Paul
October 26, 2011
Paul, I had the compressor and wasn't a huge fan of the fabric. Pertex makes 15 denier fabrics that feel burly, but the proprietary fabric used on this doesn't compare to high quality fabrics like those. Mine never ripped, but honestly I returned it before it ever had the chance to. Look at the First Ascent Igniter. After a whole lot of research it's what I came to, and it serves me very well. Rab Xenon is not a bad plan either if you don't need quite as much insulation. Sorry, but I've never dealt with the thermawrap pro. From what I've heard though, the primaloft one in the compressor is a far better insulation than Mont-Bell's thermawrap.
By: James Jenden
October 26, 2011
The ultimate pack it ski jacket!
By:
Noah Howell
February 1, 2011
This jacket is the ideal puff layer for ski touring/mountaineering. It's light and stuffs down small in your pack and then comes through big when you need it. Nice piece to have when the day turns out colder or windier than you expected. It fits under or over my soft shell for that extra warmth. Often I'll ski it as my outer layer and it sheds snow and wind like a shell. Seriously I'm in love with this piece, but don't tell my girlfriend cause she gets jealous easily.
How does this compare to the MH Lado?
How does this compare to the MH Lado?
By: Easy rider
October 6, 2011
This (older) model is only 15D. Only the new model is 20D as Jeff stated. The kids version is made of 30D fabric (something that really annoys me). Sure kids are rough on clothes but so are the environments I would be wearing this jacket in. This is the one thing about this jacket that has me still shopping around. Durability is of more concern to me than the small amount of weight savings from a lighter fabric. How does an outdoor company not feel the same way?
By: Paul
October 25, 2011
HI Easy Rider,
The Lado first: It is insulated with Thermic Micro (Mountain Hardwear's own insulating material), has a 30D face fabric, weighs about 17oz, and doesn't have a chest pocket. The Compressor is insulated with Thermic Micro (same material) has a 20D face fabric is just a few ounces lighter (15 oz)and has a chest pocket. A nice hood is also available in the Compressor, pack compatible hand pocketss, a chest pocket, insulation zoning (more insulation where you need it) and also a trimmer fit. So, the Lado has a bit tougher face fabric, and is slightly heavier, and I don't believe it has a model with a hood. Hope this helps!
By: Jeff Blackston
October 17, 2011
which one is better then?
By: Easy rider
October 7, 2011
Mh lado waterproof
By: nicolasjov2348492
October 6, 2011
My Go-to Lightweight Puffy
By:
Paddy Foran
July 1, 2011
This is a super warm jacket. It repels moisture well, synthetic insulation keeps you warm even if it gets wet. I'm 6-2, 200 lbs. and have the large. This make its a comfortable "form fit." I use it as a layer under a hard shell. In retrospect, I would have gone XL and worn it over my others layers - but no big deal. I have been comfortable in this jacket in temps ranging from the high 40s to when you actually need an 800-fill down parka. The pocket size is ample and the hood is massive. So large in fact, that it wears awkwardly without a helmet. My only major gripe with this jacket is the lack of any sort of synching on the back of the hood. Minus that, this is a fantastic, light-weight and extremely packable puffy.
Lightweight Traverse Racer
By: Nick Stadie
May 1, 2011
This jacket is for racing - bring it for those crazy missions when you need to shave every ounce!
how does this compare to the newer version? Specifically how
how does this compare to the newer version? Specifically how does the primaloft eco compare to the thermic micro? How does the new 20D nylon ripstop compare to the old convert 15D ripstop? What does the D stand for?
By: Easy rider
October 5, 2011
Mountain Hardwear claims their new Thermic Micro has better loft, but at the same time is more compressible. The insulation is a single sheet so it will not move around on your body exposing you to "cold spots" in the jacket.
The D stands for "denier" which is a unit of measure for fiber density.
The 20D is going to stronger and more resistant to tearing than 15D.
They both weigh 16oz.
By: Mitch
October 5, 2011
Insanely Light! Not Very Tough!
By:
Nick Stadie
May 1, 2011
I picked this up for general use as an insulating layer on everyday ski missions. Hike in a shirt, throw on the shell and/or insulation when you reach the ridge. I watched Andrew McLean's little promo and thought it'd be just what I was looking for.
Having used it for a few months, the jacket is now in my ultralight mountaineering kit ONLY. After the first weekend of use, loose threads and burrs were coming up everywhere. It is practically falling apart! This is such a shame since it is so nice and warm for its incredibly lightweight.
Still recommended, but 3 stars for its rather limited use. By the way, size up 1 level from whatever MH shell you usually wear so you can throw it over top.
How does this fit compared to the non-hooded Compressor jacket?
How does this fit compared to the non-hooded Compressor jacket? The non-hooded jacket has a pretty slim fit which is great for for layering under a shell, but I would think that some might use this for a light belay jacket. Is the fit the same in the torso? I'm looking to shave ounces from my current kit.
By: Lovewool
May 5, 2011
lovewool. The fit is similar between the hooded and non-hooded jackets. If you want to use it as a belay jacket I would size it up one size. This is what I did and it works great. I hope this info helps!
By: Jon Webb
May 10, 2011
Another Amazing Product From MH
By:
Steve
January 21, 2011
At first glance of this jacket, you wonder “how in the heck is that going to keep me warm, and how well is this super light weight jacket going to hold up?” Well, I decided… Why not, I’ll give it a try! I’m a super snob for MH products, and I’m glad I stuck with it. It is by far my “bring everywhere” jacket due to its crazy warmth, pack ability, and weight. It’s small enough to stuff into a hard shell pocket (bulgy, but fits), and the PL is crazy warm. If you’re looking at getting a lightweight warm jacket that you do not need to worry about getting wet, THIS IS IT! Thanks again Mountain Hardware, I appreciate your top notch products at reasonable prices.
I have the pysncro jacket xl - love it... I am wondering if this
I have the pysncro jacket xl - love it...
I am wondering if this would be an ideal jacket for under this.
Anybody have any feedback on this?
By: Billy
March 26, 2011
Billy. If you are looking for a really warm system of jackets then the Hooded Compressor would be a great candidate. It is warm enough on its own to keep you warm on cold days and combined with the Synchro Jacket you'll have a bomber, weather proof, and extremely warm set-up. I hope this info helps!
By: Jon Webb
March 27, 2011
My new favorite jacket
By:
Jake C
October 20, 2010
Another solid product from Mountain Hardwear. It is super light, and so far has not let me down for warmth. It breathes really well, so I am comfortable wearing it on chilly hikes and morning bike rides to school. I was really impressed when it kept me warm through a rain storm last week. Not exactly what it was made for, but came through anyway. Primaloft is the way to go!
So I'm torn between this jacket, the nano puff hooded, and
So I'm torn between this jacket, the nano puff hooded, and the montbell ul thermawrap. Which one will be the warmest and over all best buy, in someone's opinion. Thanks!
By: Andrew Lewis
January 31, 2011
This jacket might be slightly warmer than the Nano Puff but they are both quality jackets and you couldn't go wrong with either one of them. The Montbell is lighter but then you pay for that by losing some warmth.
By: Mike
January 31, 2011
M.H. Compressor Jacket
By:
BW
September 7, 2010
This is my second one.. first one lived a good life, had a few duct tape patches on it, but always came through and kept me warm. In my experiences, it was perfect for alpine climbing when on belay, at base camp, or winter backpacking when you stop for lunch. Fits perfectly under a shell due to low profile insulation (primaloft-heavier in body, lighter in sleeves). Seems pretty thin, but keeps you super warm. Nylon shell material is light (15D), so use in low abrasion areas is ideal over high abrasion areas (my old one sustained some scars on approach hikes). Very light and with a compression stuff sack will get very small. My old one would stuff into one of the hand packets, however this one does not (my old one didnt have a hood though). Other than that one complaint, i love the new version as much as the old one, and it goes everywhere with me. Large fits me good, nice cut for a few layers under, but not too baggy (I'm 5'10 190 athletic). If your adventure doesnt require a 2 pound puffy, this will fit the bill for pretty much everything else. Very versatile.
2 Comments Last Comment: December 10, 2010 by: Jeff Blackston
By: Jeff Blackston
December 10, 2010
Definitely more of a performance fit - although provides enough room for layers underneath.
By: Souss
November 25, 2010
Any idea about the fitting? Is it a performance fit or a regular one?
how would this compare to the sierra designs flex down? i realize
how would this compare to the sierra designs flex down? i realize synthetic and down r different, but thats really all i know! could you include some target temp ranges?
By: dusty
January 20, 2011
This jacket would be comfortable during low activity down to 20 or 30 with the proper baselayers. Its synthetic so it is easily washed, retains warmth when wet, is relatively low profile, and has an inferior warmth to weight ratio to down.
The sierra designs flex down is going to be slightly warmer, but is far heavier (incredibly heavy for the price, actually). The compressor is a much more high performance jacket, but the sierra designs will be more flexible and comfortable.
hope that helps
Simon
By: Simon Hatfield
January 20, 2011
a new favorite
By:
Kent Mearig
March 14, 2011
This jacket is a joy to wear. When it's cold enough outside that it's cold inside too, I just have more time in the day to wear it. I wore the compressor to bike to and from work in temps ranging from -5F to 40F just by exchanging the layers underneath between light fleece or cotton t-shirt. When the temps start to rise, the jacket will probably spend more time in my pack than on me, but I'll be looking forward to next winter like never before.
I'm 6'1" and 185lbs, and I think the large is probably the perfect fit for me.
How does this compare, size wise, to the Windstopper Tech jacket
How does this compare, size wise, to the Windstopper Tech jacket or the Synchro jacket? If I wear a medium in these jackets would it be safe to assume I would be a medium in this?
By: Figurant
January 6, 2011
mik. Yes, if you are a medium in the Windstopper Tech Jacket and Synchro Jacket then you will be a medium in the Compressor Jacket. I hope this info helps!
By: Jon Webb
January 12, 2011
compressor with a hood
By:
Joshua J. Moran
December 20, 2010
awesome jacket, super light weight yet super warm. this jacket is really compressible (just like the name says), i have never had a synthetic jacket compress almost as good as down. this jacket will be my new go to jacket for all season and all activities, and the material is buttery smooth.
Hi, does anyone know how this jacket compares to the Mountain
Hi, does anyone know how this jacket compares to the Mountain Hardwear Alcove? Fit? Warmth? Waterproof rating? Had trouble with the compressor fit for my son. Thanks for any help!
By: susangee1692883
January 4, 2011
susangee. The Compressor PL Jacket is insulated with 120grams of Primaloft Eco. The Alcove Jacket is insulated with 240grams of Primaloft. So, the Alcove is going to be quite a bit warmer due to the sheer amount of Primaloft insulation. Also, the Alcove Jacket utilizes the Conduit SL laminate for waterproof/breathability and weather protection... the Compressor does not. The Compessor PL is made with a 15D Nylon shell, has a good DWR (durable water repellent finish) and stuffs down very small for travel and for packing in packs... the Alcove does not pack down as small. I hope this info helps!
By: Jon Webb
January 5, 2011
Super Bueno
By:
Pat G.
November 5, 2010
I got this jacket about a week ago and it is so awesome that I have barely taken it off since I got it. It is super light and is an incredibly comfortable and cozy jacket. It is very versatile, it works great on cold mornings when I am on my way to work and once I get to the office it regulates my temperature well enough that I do not overheat once I get inside. This is just a great lightweight but well insulated winter jacket and it looks real good too.
How does this compare to the Arc'teryx Atom LT hooded ja
How does this compare to the Arc'teryx Atom LT hooded jacket?
By: Dschela
December 14, 2010
Dschela. The Atom LT and the Compressor PL Insulated Jacket are very similar jackets. Both use a nylon shell and the Atom uses a little bit of Polartec Powersheild as well. The main difference, as far as I can tell is that the Compressor uses 120grams of Primaloft Eco and the Atom LT uses 60grams of something called Coreloft. Not sure what this is... but I imagine it is their proprietary version of a short staple insulation. So, if this is the case... the Compressor will be warmer. Hope this info helps!
By: Jon Webb
December 15, 2010
Sizing chart/advice inaccurate
By:
susangee1692883
December 30, 2010
I don't think the sizing chart is accurate. Purchased a size small for my 120 pound, 5'7", 15 year old son. He wears a 28" waist in jeans, and he is a small to medium in t-shirts depending on how he wants them to fit. I would say this jacket runs almost an entire size too small. Small in the shoulders and short in sleeve length. I noticed that a size medium was recommended for someone who weighed 155 pounds and was 5'8" and wanted to add a base layer and fleece! Way misleading! Bummer, because nothing left in a medium for the sale price that I purchased it at, and I have to pay for return shipping!(Maybe it should be someone's job to make sure that sizing charts are accurate;now that would be customer service.) Not to mention that I have to shop for this jacket all over again! Backcountry's flexible return/exchange policy isn't going to help on this one! On the plus side my son liked the style. It looked fairly well made. I might have given it an extra star had the sizing been accurate, and had my purchase gone smoothly.
im 5'8", 155lbs, and want to layer base layer and fleece
im 5'8", 155lbs, and want to layer base layer and fleece under this jacket. what size is appropriate for me?
By: she100206536
December 4, 2010
Medium should fit you just fine especially considering your layering objectives. Enjoy!
By: Jon Webb
December 5, 2010
How heavy/thick is the insulation on this jacket? 120g like
How heavy/thick is the insulation on this jacket? 120g like last years? Thanks!
By: Brian Gelsinger
October 28, 2010
Yep. We are using the same amount of Primaloft ECO in this years Compressor jacket as last years. The only difference is the type of insulation used (Primaloft PL One vs. Primaloft ECO) Hope this helps!
By: Jon Webb
October 30, 2010
Change me.
Out of Stock
2010 Model No Longer Available
But don't stress, we have the latest model in stock.
Mountain Hardwear Compressor Insulated Hooded Jacket - Men's
Mountain Hardwear Compressor Insulated Hooded Jacket - Men'sResearch other out-of-stock versions:
The ultimate pack it ski jacket!
This jacket is the ideal puff layer for ski touring/mountaineering. It's light and stuffs down small in your pack and then comes through big when you more...
My Go-to Lightweight Puffy
This is a super warm jacket. It repels moisture well, synthetic insulation keeps you warm even if it gets wet. I'm 6-2, 200 lbs. and have the large. more...
- Material:
- Covert 15D ripstop nylon
- Fabric Waterproof Rating:
- water-resistant
- Insulation:
- PrimaLoft Eco
- Venting:
- none
- Pockets:
- 2 hand, 1 chest
- Hood:
- yes
- Weight:
- 16 oz
- Recommended Use:
- mountaineering, climbing
- Manufacturer Warranty:
- lifetime