Labor Day SaleLabor Day Sale

Description

Ski the bindings you like on the backcountry terrain you love.

Die-hard backcountry skiers have long been faced with the dilemma of having to compromise the performance of the high-DIN downhill bindings they love in order to access and ski the terrain they live for. The Alltime AT Binding from MFD is the solution. Simply mount your favorite downhill binding to the Alltime Channel and you're ready to rip. The Alltime boasts the lowest stand height of any AT binding systems for resort-worthy power transmission, and the Chop Block floating heel piece allows your ski to maintain its natural flex dynamics. With the new Click Lock system, the entire binding setup can be quickly switched to another pair of skis mounted with MFD switch plates so you can always head to the backcountry with the right pair of skis for the conditions.

  • Downhill bindings mount directly to the MFD Alltime Channel so you can take the confidence of your favorite bindings anywhere you want to go
  • MFD's new Click Lock system allows the entire binding setup to be easily switched to another pair of skis mounted with MFD switch plates
  • Constructed with lightweight 6061 aluminum and Dupont Zytel
  • The Alltime boasts the lowest stand height of any high DIN AT binding system, which provides maximum power transmission and control
  • The Pendulum Pivot raises the pivot point and enables efficient touring from your downhill bindings
  • Dually Bearings in the pivot point bring torsional strength and are easily replaceable
  • The Chop Block Heel piece floats freely, maintaining the natural flex dynamics of the ski
  • The 0,6,and 14-degree climbing riser is easily adjusted with a ski pole for efficient touring on any incline

Share your thoughts

Review Summary
5
6 4
2 3
3 2
0 1
1

What do you think of the

MFD Alltime AT Binding

? Share a...

Write a review

No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

  • Product review:
  • Share a video
  • Share a photo

How familiar are you with the product?(Optional)

Only jpg, jpeg, png, gif or bmp files please.

Save

Here's what others have to say...

Does MFD still make this product? Herd...

Posted on

Does MFD still make this product? Herd they might be closing up shop soon?

Responded on

Due to a couple bad winters they did decide to stop production. I don't think its come out yet either way if that if for good or until the market starts to look a little better.

Unanswered Question

so im a bit confused on these so can you...

Posted on

so im a bit confused on these so can you use almost any bindings on these to make them AT bindings and if you do this does it do it the entire time they are on the ski

Unanswered Question

Are these compatible with Soloman z11...

Posted on

Are these compatible with Soloman z11 bindings or Marker logics?

Unanswered Question

Hey- It really isn't clearly marked on the...

Posted on

Hey- It really isn't clearly marked on the website but these appear to be "Salomon/Atomic" versions of these plates. There appear to be other options, which I am assuming refers to binding types? It would have been nice if this was more clearly indicated online. Can you confirm what this designation means precisely?

3 5

MFD Out of Business

  • Familiarity: I've put it through the wringer

I emailed MFD because I have broken parts as well. They basically told me to kick rocks. They are not willing to service or replace parts on bindings but were quick to try and sell me a backpack. I will never purchase anything from these buys again because of how they treated me.

I do love the plates though.

Now that MFD is out off business, does...

Posted on

Now that MFD is out off business, does anyone know where one could purchase spare parts? I broke my heel riser and I've had no luck finding a replacement anywhere but the MFD site.

Responded on

Unfortunately they state on their site that they will no longer be offering parts to existing customers. Might still be worth shooting them an email to see if they have a riser or two kicking around. Can't hurt.

Responded on

I have 3 new MFD's in stock that I would be willing to part out. Email me with what parts you are interested in.

adam@alltunedup.com

No Scam, I'm just a little shop in Massachusetts.
www.allltunedup.com

Responded on

I emailed you about these parts, check inbox or spam.
titled MFD alltime

Unanswered Question

I'm trying to get a definative answer on...

Posted on

I'm trying to get a definative answer on mounting look px12 bindings on the MFD. MFD website and various retailers say "Time Color = black
Im Compatible bindings:
Rossignol FKS 140/180
Rossi Axial 120/140/180
Look Pivot 14/18
Look/Dynastar PX 12/15/18 "

Indicating that they are compatible. But then I hear specifically that they are not. Doors anyone know about this? Or if the look PX 12 have a different screw pattern than the other look PX models? Thanks!

Isn't the Manufacturer out of business?...

Posted on

Isn't the Manufacturer out of business? There is no warrantee support then?

Best Answer Responded on

They are out of business. Try to contact them thru their website and you'll get an email stating that.

Do they work with the Marker Demo Binding?...

Posted on

Do they work with the Marker Demo Binding? or the Knee binding?

Best Answer Responded on

I don't think it will work for either. The knee binding isn't listed as a compatable binding and the hole pattern for marker demos are different than the regular binding. Plus I don't think you would have room for the tracks you mount the demo bindings on.

Would these work with the Marker Griffon...

Posted on

Would these work with the Marker Griffon Schizo?

Responded on

The Schizo will not work since the toe piece moves and affects the pivot point. For a guide to what bindings will work with the MFD plate look below to the comment made by James Morgan who has listed the bindings that will fit with this plate.

Unanswered Question

Would these work with a pair of Salomon...

Posted on

Would these work with a pair of Salomon Z12s? The bindings aren't much different from the STH 12s, so I assume they would; not sure though.

3 5

Don't have them, but my friends say,...

they have have mixed reviews, could be be made better. A couple of my buddies have to constantly tighten up the screws in the backcountry/inbounds. My buddies in general say they are okay, but feel they don't hold up over everyday use in Jackson. You would be better off getting the Marker Duke or Salomon Guardian. When the SI & I CAST System (In final development) come out in the next year or two this blow other AT systems out of the water. If it goes like it should bc.com will have SI & I soon enough when it hit mass production, right now high end pros are finishing final tests on it this year.

Responded on

So how much will it retail for? And will it be surseptable to icing up?

Responded on

CAST is still in R&D, it'll be out next season most likely. I know pros that are on them. Google up CAST & contact Lars Chickering-Ayers (the pro skier behind them) about them, he'll give you all the information you need. That or the Dynafit Beast are two bc setups coming out next season that is only going to make everything as a whole better.

I hope bc.com will eventually sell this

Posted on

SI&I Cast is still in final development. Still probably a year away from mass production, but the ski industry is buzzing with this idea for a touring setup, I really hope it takes off. So far I've heard all good things rom pro skiers who have been on it.

4 5

MFDs are great!

These things are sweet! Although they aren't the lightest or the best for the uphill, they SHRED on the downhill. Can't even tell you have them while skiing.
Really happy with them.

5 5

Love it!

  • Gender: Male
  • Familiarity: I've put it through the wringer

I have the MFD mounted on Dynastar cham 97 with salomon STH driver 14 and I love it.
It feels as solid as regular binding. I compared it with cham 97 mounted on regular binding and the weight difference was barely noticeable. The only glitch was that the technician had to grind a little bit the plate to fit the brakes because ther are 98mm...
And finally, the blue MFD combine with blue salomon driver bindings and the cham which are also blue makes a really nice looking setup!!!!

4 5

Doesn't fit on tapered ski

I bought the mfd for my girlfriend's ski (Dynastar Legend Paradise Skis 2012 )but it didn't fit because the ski is tapered. The rear part of the mfd plate is not flat against the ski so it can't be screwed. The technician said that the only way would be to install the plate ahead of the recommended installation line but it wouldn't be ideal....and since we want to use those in the powder, I don't want her to be too much ahead.

1 5

ROSSI Binding problem

All they say on the website is that the small rossi plate fits 260-320. In reality, the fit 267-230 if you have pivot bindings, and fit 260-306 if you have axial bindings.
I have a 315 sole and just got the smalls. Got them totally mounted and then realized my boot doesn't fit.
Don't let this happen to you.
And the plates don't have enough clearance for the screws that came with it...

Responded on

Direct from the MFD website:

Rossi FKS / Look Pivot ALLTIME SMALL fits boot soles 267 - 320mm. LARGE fits boot soles 320 - 355mm. (Recommended ski width > 90mm underfoot)


Rossi Axial / Look PX ALLTIME SMALL fits boot soles 265 - 306mm. LARGE fits boot soles 300 - 331mm. (Recommended ski width > 90mm underfoot) **Note: system is not compatible with Rossi Freeski 2 or Look PX 12 style bindings.

3 5

MFD (Pros & Cons)

  • Gender: Male
  • Familiarity: I've put it through the wringer

I have the MFD on Atomic Bent Chets w? FKS 18. The bindings are solid as far as I feel comfortable huckin where dynafit's would fail. another pro is that all of my buddies keep telling me how sick they look. So here comes the cons. One day on a AT trip one of the pivot bolts backed out forcing me to abort the trip. To make matters worse MFD recently produced a replacement pivot bolt, but they make the consumer pay $16 (w/shipping) which in my opinion is not very cool for a small start-up ski company. (The picture show the bolt that backed out) Another con is the weight...but that just means a better workout ;)

MFD (Pros & Cons)
Responded on

Josp, There's a notice up on the MFD site for this issue.
http://runmfd.com/mfd-notice/
Replacement screw kits with Loctite are send out for free to solve the issue. The new and improved switch screw system that is on all 12/13 product is available for purchase as well. But not needed if you only just need the screw kit/Loctite update.
Jason

5 5

Bought for someone else

  • Gender: Male
  • Familiarity: I gave it as a gift, but have feedback to share

I bought these for my almost 50 year old dad as a present. I looked at everything on the market and settled on these for their durability and one quiver ability. Most reviews out there say they are for hard chargers but I would rate the old man as intermediate. He is not a tour skier but I wanted to get him into the backcountry as he also snowshoes a lot in the PAC NW. After a few uses he has no complaints about the weight or function of the setup and said "the stride feels very natural." The longest trek he has done was the majority of Mt. St. Helens ( a few miles). His friend skis Fritschi Freeride Pros and they toured at the same pace. Is it overkill for him to have the MFDs? Maybe but, I would hate to see him hike out of waist deep snow because his setup broke. Does he love them? Yes, and he can ski the backcountry or resort with one setup not worrying about loss of performance. I bought a pair of fairly lightweight 11 DIN Marker bindings for him and the set up was cheaper than the rest of the field and they don't require more expensive boots with pin holes in the toes. I plan to buy a pair for myself as soon as I return from overseas.

5 5

action

  • Gender: Male
  • Familiarity: I've put it through the wringer

The best freeride touring binding for hard charging in the BC and step technical accents and descends. You can go lighter but the 14 degree riser is the best for step switch backs.

View all contributions... Be patient, it might take a while.