- Home
- Ski
- Alpine Skiing
- Alpine Ski Bindings
- Look PX 12 Jib Micro Heel Ski Binding - 2010
Look PX 12 Jib Micro Heel Ski Binding - 2010 BCS
Available Colors / Styles
Be the first to upload your photo of the PX 12 Jib Micro Heel Ski Binding. >
If you daydream all summer long about perfecting your tricks in the park or pipe, or simply live at the water-ramps, the Dynastar PX 12 Jib Micro Heel Ski Binding is the vanilla-covered icing on your twintips. A 3mm shock-absorbing platform deadens high-speed chatter, and the elastic travel of the Look PX heel piece stretches to absorb impacts so as to soften your landings.
- Seven points of contact between binding and boot give you a superb feel underfoot and more control and accuracy when you maneuver through trees or down steep chutes and play in the park and pipe
- Turnable heel lets you pre-release when you should and keeps you in when you shred a hairy line
- A shorter mounting zone (where the binding is screwed to the ski under the boot instead of in front of and behind it) allows you to ride lines and spin tricks that demand the most flexibility out of the ski
- Titanium construction reduces weight and increases overall strength of the binding
Bottom Line: Give the mountain a good slashing.
Talk shop with all the gear freaks out there: ask 'em questions, upload/browse photos, and give your 2¢.
hey my friend is wanting to buy look PX 12 jib micro heel ski
hey my friend is wanting to buy look PX 12 jib micro heel ski bindings he is getting the K2 silencers skis that are 119 by 85 by 109 will these binding work for him?
By: Friction Jack
May 22, 2011
As far as the brakes being wide enough to accommodate the ski, you should be good as you are fitting a 100 mm brake on a 85 mm waist. Good price too for a solid binding.
By: Grayson Gillin
June 7, 2011
Anyone know if the 120mm brakes are compatable with this??
Anyone know if the 120mm brakes are compatable with this??
By: m_seroka
March 12, 2011
there is a single smooth indent on the plastic heel step on the brake (its in the middle of the heel pad). The heavier race heel piece's use a brake that has a horseshoe shaped indent on the heel pad. make sure they match and you will have the right fit. They do not interchange.
By: skidawg
March 25, 2011
how is this binding different from the dynastar px 12 lifter
how is this binding different from the dynastar px 12 lifter legend?
By: Keene Waller
January 11, 2011
i think you are slightly wrong on this one. this binding has a shorter heel piece hence the name "micro heel". it is the part of the heel that actually interfaces with the ski. this most likely results in less adjustment for different size boots but it does create a smaller dead spot (area where your ski cannot flex)
By: max
July 5, 2011
The binding itself is the same. The difference will be the lifter that comes with it. The "jib" version will sit lower on the ski. Across the board, Dynastar, Look and rossignol all have the same bidings.
By: Andrew Duke Grewe
January 11, 2011
is the look PX 12 jib Micro Heel ski binding good for jumps and
is the look PX 12 jib Micro Heel ski binding good for jumps and rails in the park
By: hankford
December 18, 2010
hey my friend is wanting to buy look PX 12 jib micro heel ski bindings he is getting the K2 silencers skis that are 119 by 85 by 109 will these binding work for him?
By: Friction Jack
May 22, 2011
Change me.
Out of Stock
2010 Model No Longer Available
We have a lot more Alpine Ski Bindings than that
Alpine Ski BindingsResearch other out-of-stock versions:
- DIN Range:
- 3.5 - 12
- Recommended Skier Weight:
- 170lb (77kg) plus
- Brake Width:
- 100mm
- Weight:
- [Pair] 5lb 11oz (2580g)
- Recommended Use:
- All mountain, freestyle, advanced to expert
- Manufacturer Warranty:
- 1 Year