- Home
- Ski
- Telemark Skiing
- Climbing Skins
- G3 Twin Tip Connector Kit
Community Rating
G3 Twin Tip Connector Kit
Available Colors / Styles
Stop using duct tape to attach your skins to the tails of your twintips, and get the G3 Twin Tip Connector Kit. Simply clip the connector kit to your skis’ tails, hook your skins’ tail strap to the connector, and then head out of bounds to find soft snow for stomping switch landings. This connector kit adapts flat-tail G3 skins (sold separately) to your twintip powder skis, so you can slay big lines and spin the way you want in the backcountry.
Bottom Line: Keep your skins tight and your switch 5s dialed in the backcountry.
Talk shop with all the gear freaks out there: ask 'em questions, upload/browse photos, and give your 2¢.
Solid
By:
Mike Traslin
January 1, 2012
(SOLID) Keeps your skins attached to your twin tips....after hours of abuse there is no movement....
Dialed
By:
Andy Traslin
December 25, 2010
Great idea and it works with no hassels.I've been using these
on my short skins for my Tonics.You don't have to worry about
the tail connector coming off.Once secured they aren't moving.
would theses be needed with moments (square tips and tails)?
would theses be needed with moments (square tips and tails)?
By: Red3261451
November 7, 2011
No unless your Moments have a significantly raised tail.
By: Sandy Brown
November 8, 2011
Great for Splitboards
By:
Adam Billings
July 20, 2011
I used this G3 connector kit and the Black Diamond STS kit to make a functional tail clip for splitboard skins.
Can these be used with some Black Diamond Ascention skins?
Can these be used with some Black Diamond Ascention skins?
By: Sam M.
December 9, 2010
Yes. They will fit the tails of the current BD skins. Enjoy!
By: Sandy Brown
May 8, 2011
Works Great!!!
By:
Taylor
January 9, 2012
These connectors work wonders. Easy to use, easy to adjust, and saves your top sheet. It was a bit hard to get the stock tail clips off of the skins, but other than that super easy to use.
I highly recommend these connectors.
Cool Gadgets, not necessary for semi-twins
By:
Nick Stadie
May 5, 2011
I used these on a pair of BD Verdicts, but I realized they weren't any better than the regular clips - just a lot harder to put on and off in a hurry. But I can see that they would work great for a pair of big twins. They definitely do the job of staying put when you cinch them down nice and tight. Don't be afraid to stretch those skins!
Thinking about buying these. What skin size would I buy for 191cm
Thinking about buying these. What skin size would I buy for 191cm twin tip skis with a tip with of 136mm?
By: MCSWIGS
October 23, 2010
For best grip, get the 130mm in a XL length.
By: Sandy Brown
May 8, 2011
Work great on Kuro's
By:
Ron Mason
November 25, 2010
I had trouble finding a tip connector that were bomber for my Kuro's and ultimately found the holy grail right here with the G3 Tip connector's. They don't peel off when hitting the odd stump, tree or rock and they help set a good line when applying the skin.
No more stopping to adjust skins
By:
regand1426950
February 15, 2011
If you have a pair of twin tips and skins, you need these. They work great and are easy to install.
Works as advertised
By:
Christopher S
February 4, 2011
Worked perfectly well with my K2 WorkStinx. They have a rounded, upturned tail (not true twin-tip)--the G3 Connector holds skins on securely. Biggest issue was getting the original skin clips off my G3 skins--took a bit of muscle.
These things are great for twin tips and splitboards
By:
daniel_dol330805
December 2, 2010
They are a must have for twin tip skis. I no longer have the tail slipping from side to side.
The only think that would make them better is a wider channel so I wouldn't have had to trim the fat part of the plastic tail.
Change me.
