Upgrade your Targa Ascent Bindings with G3's Ascent Climbing Wires.
Share your thoughts
Nice, but quite high-rise
I got these because I sometimes feel I need more heelrise skinning uphill with my targa ascent. These wires fit well and seems sturdy, but they are fixed, so you have to always use them when mounted. Its a bit of a hazzle to unmount to use just the org. heellifters and now after some trips with the risers I feel like wanting to try the oldsetup again. The just seem a bit to high to always use when skinning uphill.
g3 climbing wires.
Thought they were a little high and unfortunately its too difficult to remove them during a climb.
will these fit on the old 15mm g3 risers?...
will these fit on the old 15mm g3 risers?
Will these fit on old G3 (opaque red)...
Will these fit on old G3 (opaque red) bindings?
NO. These are only for the Ascent (touring) binding heels. They plug into the flipping plate and offer just the one (super high) height. Not for flipping up and down on the old red heel plates.
Check out the heel plate images here and see the holes in the clear plastic where these go in: