Free 2-Day Shipping on Orders Over $50* Up to 25% Off Marmot– Save on Clothing and Gear


The definitive splitboard skins.

Forget bootpacking and invest in a splitboard and the G3 Alpinist Split Board Skins. The asymmetrical tip and tail attachments with low-profile, self-aligning stainless steel hands make for a secure, lightweight connection, while the proprietary lightweight, fast-gliding, and supple synthetic plush nylon will have you leading the pack to the top.

  • Plush nylon fabric for traction and glide
  • Asymmetrical tip and tail attachment
  • Non-toxic, solvent-free glue adhesive to -30C
  • Offset for splitboard adjustment
  • 16cm of length adjustment

Share your thoughts



No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

    Add a:
  • Share a photo
  • Share a video


Only jpg, jpeg, png, gif or bmp files please.

Now review from the App.Download

Here's what others have to say...



  • Familiarity:I've used it once or twice and have initial impressions

WARNING - the new G3 tail clip system does not work with "blunted" tail shapes i.e. K2 Ultrasplit... Seems like a good system for a typical rounded nose/tail shape, but anything elongated or blunted will not work with these clips

My splitboard is 163 cm long (Burton Landlord), so right in the middle of S and L sizes of these skins.

Which size will fit better to my board? And why?

Best Answer


I would set you up on the long. With the adjustments of 16 cm you would be able to work with these alot more than maxing out the small size

Would you have the same advice for a 161cm. So large instead of small... as to not be at the end of the spectrum for the small pair?? If there is 16 cm of adjustable range getting the large for a 161 cm should be ok........right....?

I went with the large ones and they're not really great for a 163 Landlord.

The tail clip is set on the last hole (the shortest possible setting) and it's a little too short, I'm just barely able to stretch the skins enough to put them on. I'm worried that it will stretch a little eventually and there will be no holes left. When the skins are on, they fit well, but the tail string is really long and it sticks out behind the board.

If I set in one hole longer (on the second hole), the skin is too loose on the board. Mind that this is all with the plastic foil still on, so without the skin sticking to the board.

So it's either too tight or too loose. I'm thinking of replacing them for the short size but I'm afraid it might be the same, just on the other end of the tail clip holes - at the end of the string. It's weird that there's no middle size anymore since most of the splits are probably in high 150s/low 160s.